Draper Shade and Screen 140029FNQL
58" x 104" Access FIT V Electric Projection Screen with Motor

OUR PART #  140029FNQL


Draper's 140029FNQL is a member of their Access FIT V electric projection screen offerings - with this model featuring a 119" diagonal (58" x 104") in an HDTV image format. Other highlights include a Pure White XT1300V screen surface teamed with a quiet and low voltage motor.

The slim case design of the Access FIT V series is a ceiling-recessed, tab-tensioned, electric projection screen that provides easy installation above the ceiling—perfect for small conference or multi-purpose rooms and home theaters. Tab-tensioned screens provide a ideally flat viewing surface with better image quality. Draper’s RF welded tabs create a more durable seal that eliminates separation and stickiness. Installation of the case during the initial phase of construction eliminates job site damage, allowing for installation of the screen at a later time.

The Draper Pure White XT1300V screen surface offers a 30% boost in brightness over a traditional matt white surface while still maintaining an extremely wide viewing cone, with half gain angle over 90 degrees. There's no color shift at any angle, along with excellent white field uniformity. Available with and without black backing. This screen is one of Draper's OptiFlex family members that features the flattest front projection viewing surfaces. They are suitable for tensioning and available on either fixed frame screens or tab-tensioned roller operated screens, or both. 

Draper 140029FNQL Features:

  • Case dimensions 6-7/16" wide x 5-11/16" high (16 cm x14 cm) including trim flange.
  • Maximum image width up to 104" (264 cm) wide, depending on surface selection.
  • RF welded tabs eliminate stickiness and tab separation. Tabs warranted against separation for five years.
  • Image area fully framed with black. Standard 12"black drop at top of viewing area.
  • Adjustable or removable hoisting brackets included for easy lifting during installation.
  • Sliding brackets on top of the case allow for adjustments for mounting.
  • Sliding brackets inside case accommodate different size screens.
  • Bottom closure panel detachable or hangs in place with “T” bracket to provide accessibility for service or maintenance.
  • Quick-connect wiring allows for early installation of the case with the addition of the screen later.
  • Includes a 110V, 3-position switch (standard). Quiet, low voltage motors and 220V options are available.
  • Low voltage, video interface or other controls can bebuilt into housing for below ceiling access.
  • White case standard, black available upon request.
  • Custom sizes available.

Draper 140029FNQL Specifications:

  • Part number: 140029FNQL
  • Surface material: Pure White XT1300V
  • Image Format: HDTV
  • Diagonal size: 119"
  • Image/Viewable area: 58" x 104"
  • Case length: 131"
  • Product weight: 85 pounds
  • Shipping weight: 111 pounds

 

Draper Shade and Screen 121223  110 V Low Voltage Control with Switch

Draper Shade and Screen 121223 110 V Low Voltage Control with Switch

The Draper Shade and Screen 121223 kit contains one LVC-IV contol module and one LVC-S low voltage switch. The LVC-IV low voltage control is used to control one 115V motor by a third party system in a varity of ways.Draper Shade and Screen ...
Log In For Price
Usually ships in 7-14 business days.
Draper Shade and Screen 121167 110V ILT RF Transmitter/Receiver in White

Draper Shade and Screen 121167 110V ILT RF Transmitter/Receiver in White

The 121167 from Draper is a hand-held ILT RF transmitter for use with their motorized screen lineup. This 3-button control lets you change direction or adjust format at any point. The RF receiver plugs into the terminal block in the ...
Log In For Price
Usually ships in 7-14 business days.
Draper Shade and Screen 121169  ILT IR Trasmitter/Receiver, White

Draper Shade and Screen 121169 ILT IR Trasmitter/Receiver, White

The ILT IR is an Infrared (IR) transmitter and receiver. 3-button operation for instant access to "up", "down", and "stop" functions. Fully compatible with "learnable" IR master control systems. The IR receiver plugs into the terminal ...
Log In For Price
Usually ships in 7-14 business days.
Draper Shade and Screen 121002  MS-3R/MS-4R,110V,RemoteControl

Draper Shade and Screen 121002 MS-3R/MS-4R,110V,RemoteControl

White cover plate. 115 volt, single pole, double throw, with maintained operation. May be used with Draper electric screens and most projector lifts 
Log In For Price
Usually ships in 7-14 business days.
Draper Shade and Screen 121018  3-Position Key Control Switch, KS-3

Draper Shade and Screen 121018 3-Position Key Control Switch, KS-3

KS-3 3-position key control switch (up-off-down). Two cam-operated Single-Pole, Single-Throw contact blocks (On-Off), wired to emulate Single-Pole, Double-Throw, Center Off (On-Off-On). Maintained action. Similar to Draper's standard ...
Log In For Price
Usually ships in 7-14 business days.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM