Similar Models

Audix M40W6S [RESTOCK ITEM]
Supercardroid Hanging Microphone with 6-Inch Gooseneck, White

OUR PART #  M40W6S-RST-01


The Audix M40 is a miniaturized condenser microphone with a fully integrated preamp designed with very high sensitivity for distance miking. The primary applications for the ceiling mounted M40 include Video & Teleconferencing (VTC), distance learning, hospital rooms, surveillance and ambient room miking.

The M40 has complete immunity from RF interference caused by cell phones and GSM devices. The M40, which comes with a cardioid capsule, is also available with hypercardioid or shotgun capsules, allowing for the microphone to be used in a wide variety of applications.

The M40 is easy to install requiring only that a 5/8 inch hole be drilled in the ceiling with no additional tools required. The cable assembly is equipped with a terminal block connector. For installations where plenum rated cable is to be used a UL rated, metal plenum junction box is available.

NOTE: This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

Audix M40W6S Features:

  • Optimized for voice recognition
  • Immunity from RF interference
  • Point to shoot directivity
  • Integrated preamp circuitry
  • 12 mm gold vapordiaphragm
  • Extremely low noise, high sensitivity
  • Designed, assembled andtested in the USA

Audix M40W6S Specifications:

  • Transducer Type: Condenser
  • Frequency Response: 60 Hz - 10 kHz
  • Polar Pattern: Cardioid / Hypercardioid /Supercardioid
  • Output Impedance: 150 ohms
  • Sensitivity: 37 mV / Pa @ 1k
  • Equivalent Noise Level: 22 dB (A-weighted)
  • Signal to Noise Ratio: 72 dB
  • Maximum SPL: >/= 130 dB
  • Dynamic Range: 108 dB
  • Power Requirements: 18-52 V phantom
  • Connector: 3-pin terminal block
  • Polarity: Positive pressure on diaphragm producespositive voltage on pin 2 relative to pin 3 of output XLR connector
  • Materials / Finish: Aluminum & Zinc Alloy / Whiteor Black Finish
  • Weight: 12.9 oz (75 g)
  • Length: 6.5" (165 mm)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM