ETC CSPARDB45-X
ColorSourcePAR with Dark Blue LEDs, Bare End Connector and DMX512 via RJ45

OUR PART #  CSPARDB45-X


The ColorSource™ CSPARDB45-X Deep Blue LED luminaire was crafted by lighting experts.  It is easy to use - with or without a lighting desk - and lives up to ETC's high standards for quality.  ETC's ColorSource Deep Blue replaces those blue LEDs with a deeper 'Royal Blue' (indigo) LED.

Applications:

  • Houses of worship
  • Universities and schools
  • Hospitality
  • Retail
  • Exhibition centers
  • Meeting rooms
  • Clubs
  • Cafetoriums

ETC CSPARDB45-X ColorSource PAR Features:

  • ETC’s new RGB-L chipset (Red, Green, Blue and Lime)
  • Homogenized optics
  • Simple user interface with 7-segment display
  • PowerCon in and thru
  • DMX/RDM in and thru via RJ45 
  • LED droop compensation
  • Optically calibrated
  • Tour-ready, aluminum housing

ETC CSPARDB45-X ColorSource PAR Specifications:

  • General:
    • Eight RGB-L chipset color-mixing wash luminaire
    • ETL Listed to UL1573, the standard for stage and studio lighting units
    • IP20-rated for indoor use
    • Power- and DMX-in/thru connections for easy setup
    • Simple 7-segment, three-button interface with easy access to 12 customizable presets and five sequences
  • Physical:
    • Rugged, die-cast, all-metal housing
    • Easy-access slots for secondary lenses and standard 7.5” PAR accessories
    • Black finish
    • Hanging yoke included
  • Electrical:
    • 100VAC to 240VAC 50/60Hz universal power input
    • PowerCon in and thru connections
    • Up to nine luminaires (15A max) may be linked via power thru connector (10 luminaires total per circuit) when used with R20 relay module or Unison® Echo Relay Panel. Consult breaker trip curves when used with other equipment. Requires power from a non-dimmable source
    • Inrush
      • 120V: 35A (First half-cycle)
      • 240V: 49A (First half-cycle)
  • LED:
    • 20,000-hour LED life (20,000 hours at 70% intensity)
    • 40 Luxeon® Z LED emitters (five per optic)
  • Color:
    • Exclusive RGB-L Color array
    • Brightness and color range unlike any other 4-color system
    • Droop compensation maintains color accuracy during use
    • Optically calibrated to ensure consistency across fixture
  • Optical:
    • Primary field angle of 24.9° and beam angle of 14.5°
    • Secondary lenses available for multiple beam-spread options
    • Homoginized optics for a consistent, smooth beam
    • Refer to accessories charts for lenses available
  • Control:
    • DMX512 in and thru via RJ45 connectors (termination required)
    • RGB control (See DMX control table for additional information)
    • 15-bit virtual dimming engine provides smooth, high-quality theatrical fades
    • RDM functionality for address and setting changes
    • Local control of presets (12) and sequences (5)
  • Thermal:
    • Ambient operating temperature of 32° to 104°F (0° to 40°C)
    • Active electronic thermal management for thermal droop-free operation
    • Variable-speed fan
    • Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing
  • All-metal die-cast housing
  • Power supply, cooling and electronics are integral to each unit
  • Utilizes thermal mangement systems to maintain LED life to an average of 70% after 20,000 hours
  • Equipped with 100V to 240V 50/60 Hz internal power supply
  • Uses minumum of 40 LED emitters
  • Has Bare End connector

NOTE: See Attached for Product Features and Specifications 

ETC DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC's DPJ-10 is a 10 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.
Log In For Price
In Stock
ETC 400BD Barn Door

ETC 400BD Barn Door

Barn Door for Source Four Fresnel, Source Four PAR and Source Four PARNel fixtures.
Log In For Price
In Stock
ETC DPA-X 5' ETC PowerCon to Bare-End Power Input Lead

ETC DPA-X 5' ETC PowerCon to Bare-End Power Input Lead

The DPA-X from ETC is a Powercon to Bare End 5' cable with a UL 1573 rating (for stage and sudio luminaires and connector strips.) This item is compatible with the following ETC products: ColorSource PAR Source Four LED Desire D40 ...
Log In For Price
In Stock
ETC SELRVN-7.5 7.5" Very Narrow Lens (Round Field) for D40 Fixture

ETC SELRVN-7.5 7.5" Very Narrow Lens (Round Field) for D40 Fixture

ETC's SELRVN-7.5 is a very narrow round diffuser lens in a black frame that is cut for D40™ fixtures and creates a round field pattern. NOTE: This lens is NOT sized for use in Selador® Classic (Vivid™, Lustr®, ...
Log In For Price
In Stock
ETC SELRM-7.5 7.5" Medium Lens (Round Field) for D40 Fixture

ETC SELRM-7.5 7.5" Medium Lens (Round Field) for D40 Fixture

ETC's SELRM-7.5 is a medium round diffuser lens in a black frame that is cut for D40™ fixtures and creates a round field pattern. NOTE: This lens is NOT sized for use in Selador® Classic (Vivid™, Lustr®, ...
Log In For Price
In Stock
ETC SELRW-7.5 7.5" Wide Lens (Round Field) for D40 Fixture

ETC SELRW-7.5 7.5" Wide Lens (Round Field) for D40 Fixture

ETC's SELRW-7.5 is a wide round diffuser lens in a black frame that is cut for D40™ fixtures and creates a round field pattern. NOTE: This lens is not sized for use in Selador® Classic (Vivid™, Lustr®, Paletta™, ...
Log In For Price
In Stock
ETC SELOW-7.5 7.5" Wide Lens (Oblong Field) for D40 Fixture

ETC SELOW-7.5 7.5" Wide Lens (Oblong Field) for D40 Fixture

ETC's SELOW-7.5 is a wide oval diffuser lens in a black frame that is cut for D40™ fixtures and creates a oblong field pattern. NOTE: This lens is not sized for use in Selador® Classic (Vivid™, Lustr®, Paletta™, etc.) ...
Log In For Price
In Stock
ETC 400CC C-Clamp for ETC Fixtures, Black

ETC 400CC C-Clamp for ETC Fixtures, Black

This C-Clamp from ETC is useful for mounting and locking lighting fixtures to a grid pipe and includes an M12 thread screw for the fixture yoke.
Log In For Price
In Stock
ETC 400SC 30" Source Four Safety Cable in Black

ETC 400SC 30" Source Four Safety Cable in Black

This black safety is 30" in length and is a useful Source Four fixture accessory.Specifications: Cable is a 30" long, 1/8" diameter black wire rope cable with snap clamp fitted. The safety ratio of the cable is 5:1 The breaking load ...
Log In For Price
In Stock
ETC 407CF Gel Frame for Source Four PAR

ETC 407CF Gel Frame for Source Four PAR

This Source Four PAR accessory is a Color Frame that comes with a black finish.
Log In For Price
In Stock
ETC DPSJ-25 ETC Power Thru Jumper, 25Ft

ETC DPSJ-25 ETC Power Thru Jumper, 25Ft

This is 25' Power thru Jumper from ETC that is an Edison input power cable with inline switch.Note: Power thru jumpers connect to fixture’s output (thru) connector to provide link to successive fixtures.
Log In For Price
Usually ships in 6-10 business days.
ETC CSPARFSY ColorSource PAR Floor Stand Kit

ETC CSPARFSY ColorSource PAR Floor Stand Kit

The ETC CSPARFSY Floor Stand Kit is an optional accessory for their ColorSource PAR that converts the provided standard yoke to an expandable yoke.. NOTE: The CSPARFSY is highlighted above in GRAY.
Log In For Price
Usually ships in 4 business days.
ETC SELRN-7.5 7.5" Narrow Lens (Round Field) for D40 Fixture

ETC SELRN-7.5 7.5" Narrow Lens (Round Field) for D40 Fixture

ETC's SELRN-7.5 is a narrow round diffuser lens in a black frame that is cut for D40™ fixtures and creates a round field pattern. NOTE: This lens is NOT sized for use in Selador® Classic (Vivid™, Lustr®, ...
Log In For Price
Usually ships in 4 business days.
ETC SELON-7.5 7.5" Narrow Lens (Oblong Field) for D40 Fixture

ETC SELON-7.5 7.5" Narrow Lens (Oblong Field) for D40 Fixture

ETC's SELON-7.5 is a narrow oval diffuser lens in a black frame that is cut for D40™ fixtures and creates a oblong field pattern. NOTE: This lens is not sized for use in Selador® Classic (Vivid™, Lustr®, Paletta™, etc.) ...
Log In For Price
Usually ships in 3 business days.
ETC SELOM-7.5 7.5" Medium Lens (Oblong Field) for D40 Fixture

ETC SELOM-7.5 7.5" Medium Lens (Oblong Field) for D40 Fixture

ETC's SELOM-7.5 is a medium oval diffuser lens in a black frame that is cut for D40™ fixtures and creates a oblong field pattern. NOTE: This lens is NOT sized for use in Selador® Classic (Vivid™, Lustr®, Paletta™, etc.) ...
Log In For Price
Usually ships in 3 business days.
ETC 400PTH3 Top Hat for Source Four PAR, 3" Tube, Black

ETC 400PTH3 Top Hat for Source Four PAR, 3" Tube, Black

This Source Four PAR accessory is a Top Hat 3" tube that is black in color and is intended to reduce light flare.
Log In For Price
Usually ships in 6-10 business days.
ETC 400PTH6 Top Hat for Source Four PAR, 6" Tube, Black

ETC 400PTH6 Top Hat for Source Four PAR, 6" Tube, Black

This Source Four PAR accessory is a black Top Hat with a 6" tube that is used to reduce light flare.
Log In For Price
Usually ships in 4 business days.
ETC 400PHH Source Four Par Half Hat, Black

ETC 400PHH Source Four Par Half Hat, Black

This Source Four accessory is a Source Four PAR Half Hat that is black in color. Like ETC's Top Hat, this item reduces and controls flare, but from one side only.
Log In For Price
Usually ships in 3 business days.
ETC SELLVN-7.5 7.5" Very Narrow Linear Lens for D40 Fixture

ETC SELLVN-7.5 7.5" Very Narrow Linear Lens for D40 Fixture

ETC's SELLN-7.5 is a very narrow linear diffuser lens that is cut for D40™ fixtures and creates a narrow linear field pattern. Linear lenses may be combined to create desired field size. This narrow linear field lens is made of the ...
Log In For Price
Usually ships in 6-10 business days.
ETC SELLN-7.5 7.5" Narrow Linear Lens for D40 Fixture

ETC SELLN-7.5 7.5" Narrow Linear Lens for D40 Fixture

ETC's SELLN-7.5 is a narrow linear diffuser lens that is cut for D40™ fixtures and creates a narrow linear field pattern. Linear lenses may be combined to create desired field size. This narrow linear field lens is made of the same ...
Log In For Price
Usually ships in 1 business day.
ETC SELLM-7.5 7.5" Medium Linear Lens for D40 Fixture

ETC SELLM-7.5 7.5" Medium Linear Lens for D40 Fixture

ETC's SELLM-7.5 is a medium linear diffuser lens that is cut for D40™ fixtures and creates a narrow linear field pattern. Linear lenses may be combined to create desired field size. This narrow linear field lens is made of the same ...
Log In For Price
Usually ships in 1 business day.
ETC SELLEW-7.5 7.5" Extra Wide Linear Lens for D40 Fixture

ETC SELLEW-7.5 7.5" Extra Wide Linear Lens for D40 Fixture

ETC's SELLEW-7.5 is a extra wide linear diffuser lens that is cut for D40™ fixtures and creates a narrow linear field pattern. Linear lenses may be combined to create desired field size. This narrow linear field lens is made of the same ...
Log In For Price
Usually ships in 6-10 business days.
ETC SELLW-7.5 7.5" Wide Linear Lens for D40 Fixture

ETC SELLW-7.5 7.5" Wide Linear Lens for D40 Fixture

ETC's SELLW-7.5 is a wide linear diffuser lens that is cut for D40™ fixtures and creates a narrow linear field pattern. Linear lenses may be combined to create desired field size. This narrow linear field lens is made of the same ...
Log In For Price
Usually ships in 6-10 business days.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM