7" 4K HDMI Recording Monitor


The Ninja Flame from Atomos overcomes the display challenges of shooting Log, displaying the full brightness range on a field monitor for the first time, with true-to-life vibrant colors. It has a 7” 10-bit 1500nit panel with the AtomHDR engine and HDMI connections to record and playback video to 4K/HD 10-bit ProRes/DNxHR. This will change the way you shoot with Log. Record Log in 4K or HD ProRes/DNxHR from DSLR's with the Ninja Flame's HDMI input and thanks to the AtomHDR engine's combination of 10+ stops dynamic range, 1500nit brightness and 10-bit color processing you can monitor the HDR Log with vivid, natural colors.

Now you can shoot what you see with Camera Log (S-Log2, S-Log3, C-Log, V-Log etc) which delivers maximum sensor detail in your recordings, but on other monitors it looks washed out & makes judging exposure difficult. The compromise for filmmakers is to use LUT's to get the approximate "look" but sacrifice detail or use calibration cards, waveform & some “rule of thumb” figures to set exposure correctly. AtomHDR is the solution, accurately displaying HDR Log footage with the brightness to see Log as the eye sees it.

Not all scenes call for HDR Log recording. In situations that don't call for 10 stops of dynamic range, use the intensity of the 1500nit panel to monitor traditional standard dynamic range (SDR/Rec709) video at high brightness for outdoor monitoring - Simply pick the right mode, HDR or High Bright SDR, and get busy setting up your shot on the premium 7" display boasting 10-bit processing, 1920x1200 resolution, 325ppi pixel density, optional calibration to overcome natural LCD color drift and an arsenal of precision video setup tools for perfect shots every time.

The Ninja Flame will allow you to get more from your DSLR as its the ideal partner for DSLR and Mirrorless cameras with Log output over HDMI. From gimbal operators to Corporate to Indy filmmakers, your recordings are instantly upgraded to the defacto standard for Hollywood, Indie & Broadcasters (ProRes and DNxHR), ensuring you're not technically rejected in Post and letting you see the detail of your camera's Log on set with natural colors on the calibrated 7" AtomHDR High Bright monitor.

When recording 4K and high frame rate HD within the camera might seem enough, but unless you record with the right codec you're restricting flexibility in post and even run the risk of having your footage technically rejected. Along with the high pixel density of 4K, the Ninja Flame records higher resolution 10-bit color information, more precise yet efficient 4:2:2 color encoding and to visually lossless, edit-ready codecs like Apple ProRes or AVID DNxHR. Now you're recording professionally, capturing full individual frames just like film and opening up more creativity in post and grading. Additionally, bypassing internal recording also bypasses the 30min recording barrier found on many Mirrorless/DSLR cameras

And the Ninja Flame's flexible OS is packed with an extensive suite of scopes, all 1-touch away and simple to use. The Video OS includes tools for focus, framing & exposure (Focus peaking, 2:1/1:1 zoom, Zebra, False Color, Frame guides, SMPTE Safe Area, Waveform, RGB parade, vectorscope) along with a flexible 3D LUT implementation (use built-in LOG to Rec.709 Video or upload .cube files) and options for anamorphic de-squeeze monitoring. 

Atomos Ninja Flame Includes:

  • Ninja Flame unit  
  • soft travel case  
  • 1x Master Caddy II drive caddy  
  • 1x 12V-3A AC power supply  

Atomos Ninja Flame Features:

  • AtomHDR dynamic range
  • High Bright 7" Calibrated Monitor
  • 10-bit monitoring
  • HDMI
  • Professional 4K Recording
  • Improved Video Quality
  • Continuous power 

Atomos Ninja Flame Specifications:

  • Product Code: ATOMNJAFL2
  • Weight:
    • Without batteries & media: 21.9oz (620g)
    • With batteries & media: 37.5oz (1064g)
  • Dimensions (W x H x D): 8.4 x 5 x 1.8” (214 x 127 x45mm)
  • Construction:
    • High quality lightweight ABS Polycarbonate for durability & portability
    • Built-in armor protection
  • Power:
    • Operating power: 10 - 24W
    • Compatible batteries: NP-F series and supporting accessories
    • Input voltage (battery): 6.2V to 16.8V
    • Battery time (based on 2 x 7.4V batteries):
      • 5200mAh - up to 1.5hrs (monitor & record 4K 30p)
      • 7800mAh - up to 2.2hrs (monitor & record 4K 30p)
    • DC In: 1 x DC in (6.2 - 16.8V)
    • Continuous power (* Patent pending): Primary-secondary battery system Change batteries without losing power Loop batteries continuously 
  • Touchscreen:
    • Size: 7.1”
    • Resolution: 1920 x 1200
    • PPI: 325
    • Aspect ratio: 16:9 native
    • Color Gamut: REC709 HDTV
    • Look up table (LUT) support: 3D LUT (.cube le format)
    • Anamorphic de-squeeze: 2x, 1.5x, 1.33x, Panasonic 8:3
    • Technology: SuperAtom IPS panel (capacitive touch), calibration to Rec.709 with optional calibration unit 
  • HDR:
    • AtomHDR: Yes
    • Supported Log formats: Sony SLog2 / SLog3, Canon CLog / CLog 2, Arri Log C, Panasonic Vlog, JVC JLog, Red LogFilm
    • Supported Gamuts:
      • Sony SGamut / SGamut3 / SGamut3.cine
      • Canon Cinema / BT2020 / DCI P3 / DCI P3+
      • Panasonic V Gamut
      • Arri Alexa Wide Gamut
    • Bit depth: 10-bit (8+2 FRC)
    • Brightness: 1500nit (+/- 10%)
    • HDR input (PQ/HLG): Yes / Yes
    • HDR output (PQ/HLG): Yes / Yes
  • Video input/loop out:
    • HDMI: 1 x HDMI (1.4b)
    • SDI  -
    • Signal: Uncompressed true 10-bit or 8-bit 422 (camera dependent)
  • Video output (play out):
    • HDMI: 1 x HDMI (1.4b)
    • SDI  -
    • Signal: Uncompressed true 10-bit or 8-bit 422 (playback file dependent)
  • Supported loop out formats:
    • HDMI to HDMI: 720p 50/60, 1080i 50/60, 1080p 24/25/30/50/60/120, 2160p 24/25/30
  • Supported Codecs & frame rates (record &playback):
    • Raw to CDNG (Record only)*: N/A
    • Raw to ProRes / DNxHR: N/A
    • Video to ProRes / DNxHR  
    • Codecs Apple ProRes HQ, 422, LT
  • Frame rates: 
    • 4K UHD; 24/25/30
    • 1080p; 24/SF24/25/SF25/30/SF30/50/60/100/120
    • 1080i; 50/60i
    • 720p; 50/60p
  • Onboard processing:
    • Pulldown removal:   
      • 24/25/30pSF > 24/25/30p (2:2 pulldown)
      • 60i > 24p (3:2 pulldown)
      • 4K UHD downscale for HD monitoring: Yes - Loop-out andplayback
  • Audio in/out (48kHz PCM audio):
    • HDMI: 2 or 8ch 24-bit, camera dependent
    • Audio: Line in / Mic in / Headphone out 2ch 48kHz 24-bit 
  • Remote start/stop:
    • HDMI: Auto HDMI Trigger
    • Supported Protocols - Canon, Sony, Atomos Open Standard
    • Other: LANC control - Slave
  • Playback:
    • Playlist / Genlock / LTC: Yes / No / No
    • CDNG (Recorded content): N/A
    • ProRes (Recorded content): All recorded files can playback. Playback in slow motion >= 100fps
    • DNxHR / DNxHD (recorded content): All recorded files can playback. Playback in slow motion >= 100fps
  • Recording:
    • Pre-roll record: Yes (HD 8s, 4K 2s)
    • Custom timelapse: Yes
    • Meta data tagging: Yes (10 tags available)
    • Supported media: 2.5” SSD/HDD compatibility depends on recording format, resolution and frame rate. Visit for list of tested and approved drives
    • Master caddy case:
      • Master Caddy II (included)
      • 75mm x 105mm x 12mm
    • Master caddy dock: 2.5” SATA to USB 2.0/3.0
    • Supported applications:   
      • FCPX/FCP7+ / Media Composer
      • 5.0+ / Premiere 5.5+
      • EDIUS 6.0+ / Vegas Pro 10+ / Lightworks /
      • Autodesk Smoke 2015
    • XML support: FCPX XML native, FCP7 supported with conversion (Adobe compatible)
    • Optional extras:   
      • Accessory Kit: 2 x battery, 1 x charger, 1 x power supply, HPRC case, USB dock, control cable, Dtap cable, Master Caddy x 4, Power supply, Sun hood
      • Power Kit: 2 x battery, 1 x charger, 1 x power supply
      • Other: Atomos HDMI cable, X-Rite i1DisplayPro calibration
Add to Cart

We're sorry, only of this item available

Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM