Audio-Technica ATW-1366
Digital Wireless System 10 PRO with 2 Boundary Microphones

OUR PART #  ATW-1366

The Audio-Technica ATW-1366 is a specially-configured package that's a member of their System 10 PRO Digital Wireless family. It includes the ATW-RC13 Rack-mount dual receiver chassis, ATW-RU13 x2 receiver unit, and ATW-T1006 x2 cardioid condenser boundary microphone/transmitter desk stands.

System 10 PRO
Audio-Technica’s System 10 PRO Rack-Mount digital wireless system offers the same interference-free operation in the 2.4 GHz range (outside TV bands) as their original System 10 wireless system, but expands upon the features and versatility. The durable half-rack chassis is equipped to house 2 receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) using Ethernet cable. Up to 5 chassis (10 receiver units - additional receivers sold separately) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.

Just like all the products in the System 10 wireless lineup, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and 3 levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on 2 dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit, maximizing signal integrity.

Audio-Technica System 10 PRO Features:

  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
  • Operates in the 2.4 GHz range – completely free from TV interference
  • Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
  • Up to 5 chassis (10 receiver units) can be linked and used simultaneously (Note: additional receivers sold separately)
  • Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
  • Chassis' System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, and setup
  • Three levels of diversity assurance: frequency, time, and space
  • Ground-lift switch helps eliminate audible hum caused by ground loops

Audio-Technica System 10 PRO Specifications:


  • Operating Frequencies: 2.4 GHz ISM band (2400 to 2483.5 MHz)
  • Dynamic Range: >109 dB (A-weighted), typical
  • Total Harmonic Distortion: <0.05% typical
  • Operating Range: 200ft (60m) Open range env. with no interfering signals
  • Operating Temperature Range: 32° F to 104° F (0° C to +40° C) Battery performance may be reduced at very low temperatures
  • Frequency Response:
    • 20 Hz to 20 kHz
      Depending on microphone type

ATW-RC13 Receiver

  • Receiving System: Diversity (frequency/time/space)
  • Output Connectors: Remote Receiver Connector: RJ45
  • Link Connector: RJ12
  • Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
  • Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
  • Dimensions (W x H x D): 8.26" x 1.73" x 6.67" (209.8 x 44 x 169.3mm)
  • Net Weight: 33.2 oz (940 g)

ATW-T1006 Desktop Boundary Microphone Transmitters

  • Maximum Input Sound Level: 139 dB SPL
  • RF Power Output: 10 mW
  • Spurious Emissions: Following federal and national regulations
  • Power Supply: 100-240V AC (50/60 Hz) to 5V DC 0.5A switched mode external USB-type power supply
  • Internal Battery: 3.7 V Rechargeable Li-ion Battery
  • Battery Rating:
    • 5.5 Wh
    • 1,460 mAh
  • Battery Life:
    • 9 hours
      Depending on environmental conditions
  • Battery Charging Time:
    • 4 hours, 30 minutes
      Depending on environmental conditions
      An empty battery will recharge 90% in 2 hours.
  • Dimensions (W x H x D): 3.78'' x 1.50'' x 4.83'' (96.1 × 38.0 × 122.8mm)
  • Net Weight: 14.4 oz (408 g)

Note: All specifications and product details are subject to change without notice.

WARNING: Cancer and Reproductive Harm -

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM