ETC S4WRDPAR-1
White Fixture Body Only

OUR PART #  S4WRDPAR-1


The ETC S4WRD PAR Fixture Bodies allow you to transform your Source 4WRD LED into a beautiful softlight. Taking advantage of the great energy efficiency, cool operating temperatures, DMX dimming or line voltage dimming and no lamp changes, the Source 4WRD PAR and PARNel deliver an amazing output without compromise.

Applications:

  • House of worship
  • Universities and schools
  • Hospitality
  • Retail
  • Exhibition centers
  • Meeting rooms
  • Clubs
  • Cafetoriums

ETC S4WRD PAR Includes:

  • Mounting post
  • Color frame
  • PAR ships with AR coated flat lens (other lenses sold separately)

ETC S4WRD PAR Features:

  • Fixture bodies for use with Source 4WRD LED
  • Works just like a Source Four PAR, using the sameaccessories
  • 155W at full output
  • Brighter than the 750W HPL versions
  • Uses same Source 4WRD LED as the Source 4WRD ellipsoidal

ETC S4WRD PAR Specifications:

  • Source:
    • LED Details: S4WRD LED (48 Cree LEDs) *Not Included*
    • Max Lumens: 10,569
    • Lumens Per Watt: 68
    • L70 Rating (Hours to 70% output): 30,000 hours (estimated value, official results pending)
  • Color:
    • Colors Used: White - 3000 K (Source 4WRD LED)
    • Color temperature range: 3000 K
    • Calibrated Array: No
    • Red Shift: No
    • NOTES: S4WRD is available in 80+ CRI (Standard) and 90+ CRI (Gallery) - See S4WRD datasheet for details
  • Optical:
    • Beam angle range: 19.5°-62°
    • Gate size: N/A
    • Aperture size 7"
    • Pattern projection: No
    • Pattern size: N/A
    • Camera flicker control/Hz range: No
    • NOTES: PAR ships with an AR coated flat lens. Additional PAR lenses sold separately. PARNel ships with
      PARNel lenses
  • Control:
    • Input method: Line Voltage with DMX Control or Line dimmed
    • Protocols: DMX via RJ45 connector
    • Modes (Footprint): 1
    • RDM configuration: Yes
    • UI type: 7-segment address display
    • Local control: Yes
    • Onboard presets: No
    • Onboard sequences: No
    • Onboard effects: No
    • Slave/Master control: No
    • NOTES: Local level control via UI
  • Electrical:
    • Voltage range: 114-125V, 60Hz
    • Input method: Hard wired, 1-meter cord, Edison plug
    • Inrush: 30A (first half-cycle) at 120V
    • Fixtures per circuit: 14 (20A switched circuit, R20 module or similar)
    • Wattage (Typical/Standby): 155W/1.2W
    • Current draw: 1.35A at 120V
    • NOTES: When using line dimming, see the S4WRD Manual for dimmer setup
      • When using line dimming, standby power is 0W
  • Thermal:
    • Ambient operating temp: 41°-104°F (5°-40°C)
    • Fan (controllable): Yes (no)
    • Droop compensation: No
    • dB range: 28dBa average at 1m
    • BTUs/hour: 529
  • Physical:
    • Materials: Die-cast aluminum
    • Color options: Black, white, silver or custom color
    • Mounting options: Yoke
    • IP rating: IP-20
    • Weight: 6.6lbs
ETC 407CF Gel Frame for Source Four PAR

ETC 407CF Gel Frame for Source Four PAR

This Source Four PAR accessory is a Color Frame that comes with a black finish.
Log In For Price
In Stock
ETC 400X-XWFL Extra Wide Flood Lens

ETC 400X-XWFL Extra Wide Flood Lens

Extra Wide Flood Lens for Source Four PAR fixtures.
Log In For Price
In Stock
ETC 400-WFL Wide Flood Lens

ETC 400-WFL Wide Flood Lens

Product shown in image is for illustrative purposes only. Actual product may vary in appearance.Replacement Wide Flood Lens for Source Four PAR fixtures.
Log In For Price
In Stock
ETC 400-MFL Medium Flood Lens

ETC 400-MFL Medium Flood Lens

Product shown in image is for illustrative purposes only. Actual product may vary in appearance.Replacement Medium Flood Lens for Source Four PAR fixtures.
Log In For Price
In Stock
ETC 400BD-1  White Barn Door for Source Four PAR

ETC 400BD-1 White Barn Door for Source Four PAR

The ETC 400BD-1 is a White Barn Door for Source Four PAR.  Large leaves and tube diameter optimize Source Four PAR light output.  Diameter: 6.75".  
Log In For Price
Usually ships in 6-10 business days.
ETC 400WB Weighted Base for Source Four PAR

ETC 400WB Weighted Base for Source Four PAR

ETC's 400WB Source Four PAR 5 lb weighted base is for use on floor or table.  With a black finish, 1/2" tapped center hole for fixture mounting and a 10" diameter.
Log In For Price
Usually ships in 6-10 business days.
ETC 400PTH6-1 6" White Tube Top Hat for Source Four Par

ETC 400PTH6-1 6" White Tube Top Hat for Source Four Par

NOTE: Product shown in image is for illustrative purposes only. Actual product is WHITE in appearance. This Source Four lighting accessory is a Top Hat for Source Four PAR lights that is designed to reduce flare.
Log In For Price
Usually ships in 6-10 business days.
ETC 400CC-WHITE 400CC-1 C-Clamp for Source Four, White

ETC 400CC-WHITE 400CC-1 C-Clamp for Source Four, White

NOTE: Product shown in image is for illustrative purposes only. Not representative of actual product which is WHITEin color.C-Clamp for Source Four
Log In For Price
Usually ships in 6-10 business days.
ETC 400PTH3 Top Hat for Source Four PAR, 3" Tube, Black

ETC 400PTH3 Top Hat for Source Four PAR, 3" Tube, Black

This Source Four PAR accessory is a Top Hat 3" tube that is black in color and is intended to reduce light flare.
Log In For Price
Usually ships in 6-10 business days.
ETC 400-LS Set of 4 Lenses for Source Four PAR Fixtures

ETC 400-LS Set of 4 Lenses for Source Four PAR Fixtures

Product shown in image is for illustrative purposes only. Actual product may vary in appearance.Full replacement set of lenses for Source Four PAR Fixtures. Includes the following types: Very Narrow, Narrow, Medium Flood, and ...
Log In For Price
Usually ships in 3 business days.
ETC 400SC-1 30" Source Four Safety Cable in White

ETC 400SC-1 30" Source Four Safety Cable in White

This white safety is 30" in length and is a useful Source Four fixture accessory.NOTE: Product shown in image is for illustrative purposes only. Actual product is white in appearance.Specifications: Cable is a 30" long, 1/8" diameter ...
Log In For Price
Usually ships in 4 business days.
ETC 400-VNSP Very Narrow Spot Lens

ETC 400-VNSP Very Narrow Spot Lens

Product shown in image is for illustrative purposes only. Actual product may vary in appearance.Replacement Very Narrow Spot Lens for Source Four PAR fixtures.
Log In For Price
Usually ships in 2 business days.
ETC 400-NSP Narrow Spot Lens

ETC 400-NSP Narrow Spot Lens

Product shown in image is for illustrative purposes only. Actual product may vary in appearance.Replacement Narrow Spot Lens for Source Four PAR fixtures.
Log In For Price
Usually ships in 6-10 business days.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM