Radio Design Labs D-ECR1
Power On/Off Remote Control, White Front Panel

OUR PART #  D-ECR1


RDL's D-ECR1 is a wall-mounted remote control providing A/V system power-up and power-down. The D-ECR1 provides a momentary pushbutton for power control and an LED power status indicator. The indicator glows yellow when the associated system power is in the standby mode. Pressing the soft power button toggles the system power on. The indicator glows blue when system power is on. Pressing the button when the power is on returns the system power to standby. If the host controller is set to allow full power-down, holding the button for 3 seconds takes the system out of standby and turns it off. The system remains off until the button is again pushed, placing the system in standby.

RDL D-ECR1 Features:

  • Remote System Power On/Off Control Panel
  • Pushbutton Toggles Power On and Off/Standby
  • LED Power Indicator Color Indicates Mode
  • Blue LED: Active System Power
  • Yellow LED: Standby (System Power Off)
  • Red LED: Power Off and Auto Power-Up Disabled
  • Flashing Red LED: Emergency Override
  • Direct Control of Modules with RJ45 Power Control
  • Connection to Controller Using Twisted-Pair Wiring

RDL D-ECR1 Specifications:

  • Power button: Momentary
  • Indicator: Red = Power Off; Yellow =Power Standby; Blue = Power On
  • Mounting: Mounts in standard US electrical box, RDL WB-or SMB- series boxes (sold separately)
  • Dimensions: 4.1" H x 1.44" D x 1.7" W (10.4 x 3.7 x 4.33 cm)
Radio Design Labs DC-4G  Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)

Radio Design Labs DC-4G Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)

Radio Design Labs' DC-4G desktop chassis holds four Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount to ...
Log In For Price
In Stock
Radio Design Labs WB-1U Single-Gang Universal Wall Box

Radio Design Labs WB-1U Single-Gang Universal Wall Box

Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
Log In For Price
In Stock
Radio Design Labs CP1-W Wall Plate, Single Cover Plate, White

Radio Design Labs CP1-W Wall Plate, Single Cover Plate, White

For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-1U Universal Wall Box.
Log In For Price
In Stock
Radio Design Labs RM-D9 3RU Rack Panel Mount for 9 Decora Models

Radio Design Labs RM-D9 3RU Rack Panel Mount for 9 Decora Models

Radio Design Labs' RM-D9 is a 3 RU rack panel that allows the mounting of 9 Decora products, such as RDL remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens.The ...
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs DC-2G  Wall Mount Chasis for Decora

Radio Design Labs DC-2G Wall Mount Chasis for Decora

The DC-2G desktop chassis holds two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ...
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs RM-D3 1RU Rack Panel Mount for 3 Decora Models

Radio Design Labs RM-D3 1RU Rack Panel Mount for 3 Decora Models

Radio Design Labs' RM-D3 is a 1 RU rack panel that allows the mounting of 3 Decora products, such as RDL® remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens. The ...
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs DC-1G  Wall Mount Chasis for Decora

Radio Design Labs DC-1G Wall Mount Chasis for Decora

The DC-1G desktop chassis holds one Decora®-style product, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a vertical ...
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs WB-2U Dual-Gang Universal Wall Box

Radio Design Labs WB-2U Dual-Gang Universal Wall Box

Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs CP-2/G Double Cover Plate/Gray

Radio Design Labs CP-2/G Double Cover Plate/Gray

For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-2U Universal Wall Box. 
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs CP-1/G Single-Gang Gray Wall Plate for SMB-1, DC-1, WB-1U, Decora-Style Products

Radio Design Labs CP-1/G Single-Gang Gray Wall Plate for SMB-1, DC-1, WB-1U, Decora-Style Products

Radio Design Labs' CP-1G is for use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels.  Compatible with Decora style products and American electrical boxes.Height: 4.55" (11.6 cm)Width: 2.80" (7.1 cm)
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs CP-1S Single Gang Decora Cover Plate in Stainless Steel

Radio Design Labs CP-1S Single Gang Decora Cover Plate in Stainless Steel

The Radio Design Labs CP-1S is a single gang decora cover plate in stainless steel.Dimensions: 4.55" H x 2.8" W (11.6 x 7.1 cm)Package Dimensions: 2" x 3"Shipping Weight: 0.072 lbs
Log In For Price
Usually ships in 7-14 business days.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM