DPA FIO66F10-2-RST-01
FIO66F10-2 [RESTOCK ITEM] d:fine Dual Ear Omnidirectional Headset Microphone with Hardwired TA4F Connector and 110mm Long Boom Arm, Beige

OUR PART #  FIO66F10-2-RST-01

The d:fine™ 66 Headset Microphone combines the legendary 4066 Omnidirectional capsule with the lightweight and flexible d:fine Headset system. Available in black, beige, brown, and lime green, the DPA d:fine has been ergonomically designed to fit easily and seamlessly. It will adjust to fit any ear size and head shape while mounting securely and hardly visible. Just by rotating the boom and the earhook, the microphone can be moved from left to right ear, or into the optimum position. Staying true to the DPA legacy, d:fine offers accurate, natural voice intelligibility and very high SPL capabilities – users can both speak and sing into the mic with no hint of distortion.

NOTE: This is a RESTOCK item that is being sold WITHOUT its original packaging. It may have minor cosmetic flaws or may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

The DPA d:fine 66 is available with single- or dual-ear mounts. The dual-ear mount is dedicated for more active situations and will be safe in even the most rigorous and energetic performance applications.

The d:fine mic with boom, earhook, and cable is delivered in a neat, roadworthy box with room for accessories like transmitters and batteries. The DPA accessory line includes power supplies and adapters or cables with fixed connectors (MicroDot, 3-pin Lemo, TA4F Mini-XLR, Mini-Jack).

DPA Microphones FIO66F10-2 Includes:

  • Cable clip which anchors the cable to your clothing
  • Five color coded identification rings
  • Three foam windscreens
  • Hardwired TA4F Mini-XLR Connector for Shure Systems

DPA Microphones FIO66F10-2 Features:

  • Pristine audio quality
  • Easy single-ear or dual-ear mounting
  • Minimal visual impact

DPA Microphones FIO66F10-2 Specifications:

  • Directional Characteristics: Omnidirectional
  • Principle of Operation: Pressure
  • Cartridge Type: Pre-polarized condenser
  • Frequency Range: 20 Hz - 20 kHz
  • Frequency Range, ± 2 dB: Soft boost grid: 20 Hz– 20 kHz, 3 dB soft boost at 8 – 20 kHz. Optional High boost grid: 20 Hz – 20kHz, 10 dB boost at 12 kHz.
  • Sensitivity: Nominal +/- 3 dB at 1 kHz:  6mV/Pa; -44 dB re. 1 V/Pa
  • Equivalent Noise Level, A-weighted: Typ. 26dB(A) re. 20 µPa (max. 28 dB(A))
  • Equivalent Noise Level: ITU-R BS.468-4:  Typ. 38dB (max. 40 dB)
  • S/N Ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)
  • Total Harmonic Distortion (THD): <1 % up to 123 dB SPL peak
  • Total Harmonic Distortion (THD): <1 % up to 120 dB SPL RMS sine
  • Dynamic Range: Typ. 97 dB
  • Max. SPL, Peak Before Clipping: 144 dB
  • Output Impedance:  
    • From MicroDot: 30 - 40 ohm
    • From DAD6001-BC: 100 ohm
  • Cable Drive Capability: Up to 300 m (984 ft) with DAD6001-BC XLR adapter
  • Output Balance Principle: Signal balanced with DAD6001-BC XLR adapter
  • Common Mode Rejection Ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
  • Power Supply: For wireless systems: Min. 5 V through DPA adapter.
  • Current Consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter
  • Connector: Hardwired TA4F Mini-XLR Connector for Shure Systems
  • Color: Black, Brown or Beige
  • Weight:
    • Single Ear - Microphone Boom: 0.035 oz (1 g)
    • Earhook: 0.035 oz (1 g)
    • Cable: 0.28 oz (8 g)
    • Total: 0.35 oz (10 g)
  • Microphone Dimensions:
    • Length: 10 mm
    • Diameter: 5 mm
    • Microphone Boom Length: 110 mm
    • Capsule Diameter: 0.2" (5.4 mm)
  • Cable Length: 4.1 ft (1.25 m)
  • Cable Color: Black, Brown or Beige
  • Cable Diameter: 0.06" (1.6 mm)
  • Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
  • Temperature range: -40 °F to 113 °F (-40 °C to 45 °C)
  • Relative Humidity (RH): Up to 90%
Add to Cart

We're sorry, only of this item available

Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM