ETC CSSPOTDB-A
ColorSource Spot Deep Blue with Body Only in Black with Edison Connector

OUR PART #  CSSPOTDB-A


Now you can get the affordability of a four-color light engine with the build-quality and support of an ETC product. This model is the CSSPOTDB-A from ETC which is a ColorSource Spot Deep Blue light engine only with Edison Connector that comes in black.

NOTE: Some gear shown above are NOT INCLUDED and sold separately. Please note that lens tubes need to be ordered separately. For more information on this and other products, please contact your Sales Pro. 

This LED fixture gives you the lighting versatility you need for every budget. The ColorSource Spot brings carefully-calibrated lighting to venues with limited budgets. Its RGB-L mix takes the color way beyond the capabilities of other four-color LEDs. And with the ability to accept attachments, adapters and a variety of lens tubes, the ColorSource Spot is the right tool for any task.

Using a unique mix of red, green, blue and lime LED emitters, the ColorSource spot allows for a range of color and depth, unlike other low-cost LED fixtures. Because it utilizes standard ETC optics, adapters and accessories, it is a versatile solution for any lighting need. ETC applied its extensive color-mixing knowledge to the fixture to ensure that it can achieve brighter, richer and more believable colors than other budget LEDs. And as previously mentioned, it accepts all the Source Four LED accessories, zoom and fixed-focus lens tubes, and CYC and Fresnel adapters.

ETC’s ColorSource® family of products brings together plug-and-play operation at a budget-friendly price, making the ColorSource family ideal for small venues and tight budgets. in mind. So now any installation can affordably upgrade their lighting and power control equipment without losing out on quality.

NOTE: This fixture is for use with fixed-field lens tubes only.

Applications:

  • Houses of worship
  • Universities and schools
  • Hospitality
  • Retail
  • Exhibition centers
  • Meeting rooms
  • Clubs
  • Cafetoriums

ETC CSSPOTDB-A Features:

  • ETC’s new RGB-L array (Red, Green, Blue and Lime)
  • Also available in Deep Blue that replaces the blue LEDs with indigo for rich, saturated blues and magentas
  • Simple user interface with seven-segment display
  • PowerCon in and thru
  • DMX/RDM in and thru (5-pin XLR or RJ45)
  • LED droop compensation
  • Optically calibrated
  • Tour-ready, aluminum housing

ETC CSSPOTDB-A Specifications:

  • General:
    • ETL Listed to UL1573: the standard for stage and studio lighting units
    • IP20-rated for indoor use
    • Power and DMX in/thru connections for easy setup
    • Simple seven-segment, three-button interface with easy access to 12 customizable presets and five sequences
  • Physical:
    • Rugged, die-cast, all-metal housing
    • Available in black (standard), white, silver or custom colors (contact factory)
    • C-clamp included
    • Positive-locking double-clutch fixture body
    • Slot for glass or stainless steel patterns and soft-focus diffuser
    • Wide accessory slot with sliding cover for motorized pattern devices or optional iris
    • Hanging yoke standard. Optional yoke/floor-stand available
  • Electrical:
    • 100VAC to 240VAC 50/60Hz universal power input
    • PowerCon power in and thru connections
    • Up to nine ColorSource Spot fixtures (15A max) may be linked via power thru connector (10 ColorSource Spot luminaires total per circuit) when used with R20 Relay Module or Unison Echo™ Relay Panel

NOTE: Consult breaker-trip curves when used with other equipment. Requires power from a non-dim source

  • Inrush:
    • 120V: 28A (First half-cycle)
    • 240V: 46A (First half-cycle)
  • LED:
    • 20,000-hour LED life (20,000 hours to 70% intensity)
    • 60 Luxeon® Rebel LED emitters
  • Color:
    • Exclusive RGB-L color array
    • Available with a Deep Blue array that replaces blue with indigo
    • Brightness and color range unlike any other four-color system.
    • Optical calibration for consistency from fixture to fixture
    • Droop compensation for consistent output and color accuracy
  • Optical:
    • Use the included soft-focus diffuser for creating washes or soft light
    • Best performance using ETC’s EDLT lens tubes
    • Can use all ETC Source Four® interchangeable lens barrels: 5°, 10°, 14°, 19°, 26°, 36°, 50°, 70°, and 90° field angles, as well as 19°, 26°, 36°, and 50° EDLT lenses
    • For better performance, use the LED 50° barrel
    • Can be used with Source Four LED CYC and Fresnel adapters
  • Control:
    • Available with DMX512 in and thru via five-pin XLR or RJ45 connectors (Termination Required)
    • Simple RGB control (IRGBS profile)
    • See DMX Control Table for additional information
    • 15-bit virtual dimming engine provides smooth, high-quality theatrical fades and minimizes color shift during dimming
    • RDM functionality for address and setting change
    • Local control of presets (12) and sequences (5)
  • Thermal:
    • Ambient operating temperature of 32° to 104°F (0° to 40°C)
    • Active electronic thermal management for droop-free operation
    • Quiet fan cooling
    • Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing
ETC S4LEDCYC Source Four LED CYC Lens Adapter

ETC S4LEDCYC Source Four LED CYC Lens Adapter

The Source Four LED™ just got even more versatile. By removing the luminaire’s lens barrel and attaching a Source Four LED CYC adapter, any Source Four LED can become a superior tool for lighting cycloramas. Other cyc lights only serve ...
Log In For Price
In Stock
ETC 410LT Source Four, 10 Degree Lens Tube with Lens Installed

ETC 410LT Source Four, 10 Degree Lens Tube with Lens Installed

This is a 10 degree Lens Tube with lens installed that comes in a black finish. It emits a narrow beam of light and is intended to be used with Source Four fixtures.
Log In For Price
In Stock
ETC 470LT Source Four Lens Tube, 70 degree, Black

ETC 470LT Source Four Lens Tube, 70 degree, Black

The 470LT is from the Source Four Ellipsoidal Series of lights from ETC. It's an accessory that is a 70-degree lens tube assembly with the lens installed that comes in a black finish. When used with a Source Four Ellipsoidal Series ...
Log In For Price
In Stock
ETC 414LT Source Four, 14° Black Lens Tube with Lens Installed

ETC 414LT Source Four, 14° Black Lens Tube with Lens Installed

This accessory from ETC is a 14° lens tube assembly with the lens installed that comes in with black finish. When used with a Source Four fixture it produces a narrow spread light pattern.
Log In For Price
In Stock
ETC LED50LT 50° LED Specific Black Source Four Lens Tube

ETC LED50LT 50° LED Specific Black Source Four Lens Tube

NOTE: Product shown in image is for illustrative purposes only. Actual product may vary in appearance. This is a 50° LED specific EDLT (Enhanced Definition Lens Tube) with lenses installed that's designed for the Source Four LED series ...
Log In For Price
In Stock
ETC 436EDLT 36 Degree Source Four Enhanced Definition Lens Tube in Black

ETC 436EDLT 36 Degree Source Four Enhanced Definition Lens Tube in Black

NOTE: Product shown in image is for illustrative purposes only. Actual product may vary in appearance. When your lighting situation requires even more precise optics for projecting images, gobos, and logos, the Source Four EDLT (Enhanced ...
Log In For Price
In Stock
ETC 426EDLT 26 Degree Enhanced Definition Lens Tube (EDLT) in Black

ETC 426EDLT 26 Degree Enhanced Definition Lens Tube (EDLT) in Black

When your lighting situation requires even more precise optics for projecting images, gobos, and logos, the Source Four EDLT (Enhanced Definition Lens Tube) option is an invaluable addition to your Source Four inventory. This version ...
Log In For Price
In Stock
ETC 419EDLT 19 Degree Source Four EDLT with Lens Installed in Black

ETC 419EDLT 19 Degree Source Four EDLT with Lens Installed in Black

When your lighting situation requires even more precise optics for projecting images, gobos, and logos, the Source Four EDLT (Enhanced Definition Lens Tube) option is an invaluable addition to your Source Four inventory. The EDLT attaches ...
Log In For Price
In Stock
ETC 400RS Drop In Iris for Source Four

ETC 400RS Drop In Iris for Source Four

This accessory is a Drop In Iris for 5-90 degree Source Four light fixtures.
Log In For Price
In Stock
ETC DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC's DPJ-10 is a 10 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.
Log In For Price
In Stock
ETC 400TH Black Top Hat, 5" Tube

ETC 400TH Black Top Hat, 5" Tube

This accessory is a black Top Hat with a 5" tube that intended to be used with 19-50 degree Source Four and Source Four jr fixtures.
Log In For Price
In Stock
ETC 400PH-G B Size Pattern Holder - Glass

ETC 400PH-G B Size Pattern Holder - Glass

This Source Four accessory is a Glass Pattern Holder (B Size) for 5-90 Degree Source Four Fixtures.  Specifications: X = 2.75” Y = 3.75”
Log In For Price
In Stock
ETC W6538 RJ45 to Female 5-Pin XLR adapter

ETC W6538 RJ45 to Female 5-Pin XLR adapter

The W6538 from ETC is an RJ45 to 5-pin XLR female adapter.
Log In For Price
In Stock
ETC W6539 RJ45 to Male 5-Pin XLR adapter

ETC W6539 RJ45 to Male 5-Pin XLR adapter

The W6539 from ETC is an RJ45 to 5-pin XLR male adapter.
Log In For Price
In Stock
ETC 400SC 30" Source Four Safety Cable in Black

ETC 400SC 30" Source Four Safety Cable in Black

This black safety is 30" in length and is a useful Source Four fixture accessory.Specifications: Cable is a 30" long, 1/8" diameter black wire rope cable with snap clamp fitted. The safety ratio of the cable is 5:1 The breaking load ...
Log In For Price
In Stock
ETC 400PH-B Pattern Holder - Size B

ETC 400PH-B Pattern Holder - Size B

This Source Four accessory is a B size Pattern Holder for 5º-90º Source Four fixtures.Specifications:  X = 2.75” Y = 3.75”
Log In For Price
In Stock
ETC 400PH-A Pattern Holder - Size A

ETC 400PH-A Pattern Holder - Size A

This Source Four accessory is an A size for 5º-90º Source Four fixtures.Specifications:  X = 3.25” Y = 3.75”
Log In For Price
In Stock
ETC 407CF Gel Frame for Source Four PAR

ETC 407CF Gel Frame for Source Four PAR

This Source Four PAR accessory is a Color Frame that comes with a black finish.
Log In For Price
In Stock
ETC 400DN Donut

ETC 400DN Donut

This Source Four fixture accessory is a 6.25-inch donut that controls flare in template projections.NOTE: Use A-size pattern holder with Source Four for maximum pattern effectiveness.
Log In For Price
In Stock
ETC 400CF Color Frame for the Source Four

ETC 400CF Color Frame for the Source Four

Product shown in image is for illustrative purposes only. Actual product may vary in appearance.Color Frame for the Source Four.
Log In For Price
In Stock
ETC 41530LT 15/30 S4 Zoom Assembly

ETC 41530LT 15/30 S4 Zoom Assembly

With Source Four® Zoom you only need one fixture for a variety of field angles. Plus, Source Four Zoom makes it easy: ETC's patented one-handed zoom operation makes adjustments quick, simple and safe. Technicians can focus with one hand ...
Log In For Price
Usually ships in 3 business days.
ETC 42550LT 25°-50° Black Source 4 Zoom Lens Assembly

ETC 42550LT 25°-50° Black Source 4 Zoom Lens Assembly

ETC’s 42550LT is a 25°-50° zoom lens tube assembly—in Black—designed to be used with ETC’s Source Four incandescent and LED ellipsoidal light engine bodies.ETC’s patented one hand zoom and focus operation makes adjusting the ...
Log In For Price
Usually ships in 3 business days.
ETC S4LEDFRES  Source Four LED Fresnel Adapter

ETC S4LEDFRES Source Four LED Fresnel Adapter

The ETC Source Four LED Fresnel adapter fits any Source Four LED light engine and creates tunable-white or brightly-colored washes with soft edges. The light blends evenly – with smooth overlap and uniform distribution – for washes ...
Log In For Price
Usually ships in 6-10 business days.
ETC 490LT 90° Black Source Four Lens Tube

ETC 490LT 90° Black Source Four Lens Tube

This is a replacement or spare 90° lens tube assembly with lens installed for Source Four Ellipsoidal fixtures that comes in a black finish. NOTE: Source Four lens tubes ship with color frames. 14°, 70°, and 90° lens tubes use a ...
Log In For Price
Usually ships in 3 business days.
ETC S4LED-SWD14 Smooth Wash Diffuser for 5 Degree Lens Tube

ETC S4LED-SWD14 Smooth Wash Diffuser for 5 Degree Lens Tube

This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The smooth wash diffuser is placed into the gel frame slot of the lens tube. This type ...
Log In For Price
Usually ships in 6-10 business days.
ETC DPA-A 5ft ETC PowerCon to Edison Connector Cable

ETC DPA-A 5ft ETC PowerCon to Edison Connector Cable

The DPA-A from ETC is a 5-foot Powercon to parallel blade U-ground (Edison) connector cable. This item is compatible with the following ETC products: ColorSource PAR ColorSource SPOTSource Four LED Source Four LED Studio HD ...
Log In For Price
Usually ships in 6-10 business days.
ETC DPJ-5  5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC DPJ-5 5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC's DPJ-5 is a 5 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.
Log In For Price
Usually ships in 4 business days.
ETC S4LED-SWD12 Smooth Wash Diffuser for 10 Degree Lens Tube

ETC S4LED-SWD12 Smooth Wash Diffuser for 10 Degree Lens Tube

This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The smooth wash diffuser is placed into the gel frame slot of the lens tube. This ...
Log In For Price
Usually ships in 6-10 business days.
ETC S4LED-SWD7 Smooth Wash Diffuser for 7.5 Gel Frame

ETC S4LED-SWD7 Smooth Wash Diffuser for 7.5 Gel Frame

This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The Smooth Wash Diffuser is placed into the gel frame slot of the lens tube. This type ...
Log In For Price
Usually ships in 3 business days.
ETC S4LED-SWD6 Smooth Wash Diffuser for 6.25 Gel Frame

ETC S4LED-SWD6 Smooth Wash Diffuser for 6.25 Gel Frame

This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The Smooth Wash Diffuser is placed into the gel frame slot of the lens tube. This type ...
Log In For Price
Usually ships in 4 business days.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM