Martin Professional VC-Grid 60
8x8 Grid

OUR PART #  90357560

The VC-Grid 60 is an ultra-light-weight LED video module with a 60 mm pixel pitch. Useful in creating customized LED video solutions with maximum artistic flexibility and a minimum of effort, the VC-Grid’s compact size makes it extremely suitable for integration into stage designs, set elements, creative ceilings, lobbies and much more. Used with or without a front diffuser, multiple VC-Grids can be combined in a countless variety of ways for ultimate design freedom. A combined power/data cable allows VC-Grids to be daisy-chained for easy setup and less cabling.  

Martin Professional VC-Grid 60 Features:

  • Wide range of pixel pitches to suit every application
  • Easy cabling, mapping and configuration
  • Bright and fully calibrated for optimal consistency
  • 64/16 individually controllable pixels
  • 750 nits of brightness
  • High-quality 16-bit per color image processing technology
  • Pixel-level brightness and color calibration for optimal image quality
  • P3/DMX controllable (automatic protocol detection)
  • Intuitive mapping and addressing via P3 System Controller
  • Combined power/data input (single cable for power and data input)
  • Combined power/data thru (to daisy-chain multiple VC-Grids)
  • Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system
  • Custom designs available on request (pixel pitch and module dimensions)

Martin Professional VC-Grid 60 Specifications:

  • Physical:
    • VC-Grid 8x8 60™ (LxWxH): 18.9"x 18.9"x 0.6" (480 mm x 480 mm x 15 mm)
    • Weight: 1.1 lbs (500 g)
  • Control and Programming:
    • DMX channels, 8x8 model: 192 (pixel mode) or 3 (module mode)
    • Setting and addressing: P3 System Controller or RDM-compliant controller
    • Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
    • Color and intensity calibration: Pixel-level
    • DMX compliance: USITT DMX512-A
    • RDM compliance: ANSI/ESTA E1.20
    • Firmware update: Via P3 System Controller
    • Control options: Martin P3 System Controller™ via Martin P3
    • PowerPort 1500™ and/or DMX
    • Protocol detection: Automatic
    • Control modes: pixel and module
  • Control/User Interface:
    • Device status: Multi-color visual indication
    • Device test and reset: Pushbutton to call up local test patterns and reset device
  • Optics:
    • Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under manufacturer's test conditions
  • Photometric Data:
    • Luminous intensity, calibrated mode: 750 nit
    • Viewing angle: 120° x 120°
    • Preliminary data, figures are approximate
    • VC-Grid 8x8 60™ Pixels per module: 64
  • Video Processing:
    • Brightness control
    • Gamma correction and control
    • Color temperature control
    • Color gamut control
    • Calibration processing
    • Synchronization
  • Construction:
    • Base: Black FR4 circuit board
    • Transparency through module (unmasked area): 8x8 models 49%
    • Protection rating: IP20
    • RoHS compliant
  • Installation:
    • Orientation: Any
    • Maximum number of VC-Grid™ 8x8 60 modules per daisy-chain: 12
    • Mounting: Mounting holes in module
  • Connections:
    • Power & data input: 4-pin Molex connector
    • Power & data thru: 4-pin Molex connector
  • Electrical:
    • Nominal input voltage: 48 VDC from Martin P3 PowerPort 1500™ or external PSU
    • Peak power consumption (at full intensity, full white): 30 W
    • Typical power consumption (with typical video content): 10 W
    • Figures for typical video content are indicative only and will vary
  • Thermal:
    • Cooling: Convection
    • Maximum ambient temperature (Ta max.): 45° C
    • Minimum ambient temperature (Ta min.): -20° C
    • Peak heat dissipation (calculated, at full intensity, full white): 105 BTU/hr.
    • Typical heat dissipation (calculated, with typical video content): 35 BTU/hr.
    • Figures for typical video content are indicative only and will vary
  • Approvals:
    • EU safety: EN 60950
    • EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
    • US safety: ANSI/UL 60950-1
    • Canadian safety: CSA C22.2 No. 60950-1

Click to download

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM