Ashly NE24.24M-8X16
Networkable NE-Series Protea Matrix Processor (8 inputs x 16 outputs)

OUR PART #  NE24.24M-8X16


Connecting and controlling an audio processor for networked systems has now been simplified with Ashly's NE-Series Protea ne24.24M digital signal processor. This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.

The ne24.24M Matrix Processor uses modular expansion cards to provide up to twenty-four channels of audio matrixing and processing. The base unit offers a four-input/four-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the base unit's total inputs or outputs four channels at a time. These cards are easily iinstalled in the field without the need to reprogram the device.

Matrixing allows you to route any input to any output and control individual levels once they have been assigned. Fixed path architecture and extensive processing power per channel will reduce the amount of time it takes to set up your system. All programming is accomplished using Ashly's Protea NE Software on a PC platform. No front panel controls and multi-level software security assures you a tamperproof audio system. Input channel processing blocks include Mic Preamp with Phantom Power, Gain, Delay, fifteen EQ Filters, Gate, Autoleveler and Ducker. Inputs may be configured as either mic or line level. Output channel processing blocks consist of a Cross Point Mixer, HPF/LPF, Delay, fifteen EQ Filters, Gain and Limiter. The cross point mixer in the output section allows you to route any input to any output at any level and mute any input at any output without affecting the true input configuration. The HPF/LPF block offers Bessel, Butterworth and Linkwitz-Riley filters with 12, 18, 24 and 48dB/octave slope.

Whether you are designing or installing a system for corporate boardrooms, restaurants, courtrooms, houses of worship, left/center/right theatres, auditoriums or conference centers, the Protea ne24.24M will more than satisfy your requirements for any zoned system requiring input/output matrixing with signal processing.

Ashly ne24.24M (8x16) Features:

  • 10/100 Ethernet and RS-232 computer interface Is standard
  • Extensive DSP Available
  • Easy and intuitive user interface
  • Mic/Line inputs:
    • 24-bit A/D-D/A audio resolution
    • 24-bit/150 MHz DSPs
    • Up to 24 channels of audio processing
    • 4x4 base unit configuration
    • Expand inputs or outputs 4 channels per module
    • Modules easily field installable
    • Euroblock connectors for audio, preset recall, DC remote level and data
    • 31 preset locations
    • Four dedicated remote controls for Level, Preset Recall and Programmable Functions
    • Third Party Control Friendly
    • Input and output metering viewable in dBu
    • Multi-level Security
  • Rear panel:
    • 10/100 Ethernet port
    • RS-232 Port
    • Euroblock inputs
    • Euroblock outputs
    • Remote level control
    • Preset Recall
    • Data in and out ports
  • Accessories:
    • Four Channel Input Module
    • Four Channel Output Module
    • WR-1 2-ch Level Control
    • WR-2 Four Position Switch
    • WR-5 Programmable Selector
    • RD/RW8 8-ch Level Control

Ashly ne24.24M (8x16) Specifications:

  • Five year warranty
  • Safety/Compliance: (cTUVus, FCC, CE pending), RoHs
  • Shipping Weight: 15 lbs.
  • Ashly 24.24M-INPUT Expansion Module, 4 Input

    Ashly 24.24M-INPUT Expansion Module, 4 Input

    Each card has four channels and provides all the DSP necessary for those four channels.
    Log In For Price
    In Stock
    Ashly RD8C Desktop Remote

    Ashly RD8C Desktop Remote

    The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
    Log In For Price
    In Stock
    Ashly FR-16 Network Fader Remote Control, 16 Channel

    Ashly FR-16 Network Fader Remote Control, 16 Channel

    The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
    Log In For Price
    Usually ships in 3 business days.
    Ashly FR-8 8 channel Network Fader Remote Control

    Ashly FR-8 8 channel Network Fader Remote Control

    The Ashly FR-8 and FR-16 are Ethernet devices that provide fader-based remote level control for Ashly NE (network enabled) products having DSP capabilities. The FR-8 controls up to eight user assigned inputs, outputs, or mixer outputs, and ...
    Log In For Price
    Usually ships in 4 business days.
    Ashly 24.24M-OUTPUT Expansion Module, 4 Output

    Ashly 24.24M-OUTPUT Expansion Module, 4 Output

    Each card has four channels and provides all the DSP necessary for those four channels.
    Log In For Price
    Usually ships in 3 business days.
    Ashly RW8C  8-Channel Remote Level Control

    Ashly RW8C 8-Channel Remote Level Control

    The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C and Protea 24.24M. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang ...
    Log In For Price
    Usually ships in 6-10 business days.
    Ashly NEWR-5  Remote, 6-button Network

    Ashly NEWR-5 Remote, 6-button Network

    The neWR-5 is a programmable Ethernet based remote control unit for Ashly NE Series and Pêma products. Connecting and powering the neWR-5 is done using standard Cat-5 Ethernet cable and an IEEE 802.3af Power over Ethernet (PoE) switch or ...
    Log In For Price
    Usually ships in 4 business days.
    Ashly WR-5 Programmable Zone Controller, Wall Mount, Six Button

    Ashly WR-5 Programmable Zone Controller, Wall Mount, Six Button

    The WR-5 is a microprocessor-based remote control unit for use with NE Series Amplifiers and processors and the Protea 24.24M. The WR-5 is designed to fit into a standard electrical wall box for remote control of assignable functions. ...
    Log In For Price
    Usually ships in 3 business days.
    Ashly WR-2 4-Positon Preset Recall Wallplate Remote for Ashly 24.24M

    Ashly WR-2 4-Positon Preset Recall Wallplate Remote for Ashly 24.24M

    The WR-2 allows selection of one of four presets via interlocking pushbutton switches. Each pushbutton switch connects to a screw-terminal on the rear of the 24.24M (labeled "1" through "8" "Preset Recall"). The terminal numbers correspond ...
    Log In For Price
    Usually ships in 6-10 business days.
    Ashly WR-1 2 Control Level Wallplate Remote for Ashly 24.24M

    Ashly WR-1 2 Control Level Wallplate Remote for Ashly 24.24M

    The WR-1 is an assignable, dual potentiometer remote volume control for the 24.24M. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock ...
    Log In For Price
    Usually ships in 2 business days.
    Add to Cart

    We're sorry, only of this item available



    Call a Sales Pro at for more information

    Serving Contractors, Dealers, and Installers Since 1977

    Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM