Vaddio RoboSHOT™ 12 QCCU System
PTZ Camera System [Mfr. Part #: 999-9907-000]


Vaddio's RoboSHOT™ 12 QCCU System includes Vaddio's RoboSHOT 12 PTZ camera with their matching Thin Profile Wall Mount, and IR Remote Commander control for Vaddio and Sony cameras.

RoboSHOT 12 PTZ Camera - Ideal for small to medium sized conference rooms, training rooms, or classrooms, the RoboSHOT 12 provides strong support for a range of applications, especially videoconferencing, UC conferencing, lecture capture, distance learning, telepresence, and more. A key feature of the RoboSHOT cameras is Tri-Synchronous Motion, a camera control protocol allowing all three (pan, tilt and zoom) axes simultaneous movement. Smooth and useable on-air camera movements are provided via a special algorithm that calculates the position and velocity of the smooth, direct-drive motor movements between the presets ensuring simultaneous arrival of pan, tilt, and zoom at the preset shot.

Vaddio Quick-Connect™ CCU - Delivers simple push button adjustment of AWB, red and blue gain, brightness, OPWB, gamma, chroma, detail, iris, and gain controls, giving a more accurate representation of the image that is being captured, as well as the ability to color match and shade multiple cameras. Three Scene-Store buttons offer User-defined adjustment presets. It CCU includes high-quality HD Video, power, and control over three Cat. 5 cables up to 500 feet without loss of video quality or latency. Outputs include HDMI, HD-SDI, and analog component YPbPr, adding up to extreme flexibility in system design and integration. Additionally, when powered up, all outputs are simultaneously live.

Vaddio RoboSHOT™ 12 QCCU System Includes:

  • RoboSHOT 12 PTZ Camera
  • Thin Profile Wall Mount
  • IR Remote Commander Control

Vaddio RoboSHOT™ 12 QCCU System Features:

  • HDMI, HD-SDI and HD YPbPr Outputs
  • Power/Video/Control on three Cat-5’s up to 500’
  • AWB, red and blue gain, brightness, OPWB, gamma, chroma, detail, iris and gain controls

Vaddio RoboSHOT™ 12 QCCU System Specifications:


  • Manufacturer Part #: 999-9907-000

RoboSHOT 12 PTZ Camera

  • Image Device: 1/2.8-Type Exmor CMOS Sensor
  • Video Resolution/Frequencies: 1080p60/59.94/50/30/25, 1080i/60/59.94i/50, 720p/60/59.94/50/30/25
  • Vaddio Special Features:
    • Tri-Synchronous Motion: Concurrent PTZ motor movement and simultaneous PTZ arrival at a stored preset
    • Advanced ISP: Vivid and accurate color reproduction with extremely fast, razor sharp automatic focus and iris routines
  • Video Aspect Ratio: 16:9 Aspect Ratio for all resolutions
  • Effective Pixels: 2.14 Million
  • Lens and Horizontal FOV:
    • 12X Optical Zoom, Super Wide Mode: 73.0° (wide) to 6.6° (tele),f=3.91mm to 47.0mm, F1.8 to F3.4
    • 10X Optical Zoom, Normal Mode: 67.3° (wide) to 7.6° (tele), f=3.8mm to 38.0mm, F1.8 to F3.4
      NOTE: Default is Normal Mode
  • Minimum Illumination: 1.0 lx (F1.8, 50IRE), recommended illumination >100 lux and <100,000 lux
  • Minimum Working Distance: 10mm (wide), 800mm (tele)
  • S/N Ratio: More than 50 dB
  • Sync System: Internal
  • White Balance: Auto, ATW, Indoor, Outdoor, One-push, Manual (accessible through external control)
  • Gain: Auto / Manual (0 to 28 steps - accessible through external control)
  • Back-light Compensation: On/Off (IR Remote)
  • Focusing System: Auto Focus / Manual Focus Mode / One Push Trigger Mode / Infinity Mode / Near Limit Mode
  • Noise Reduction: On/Off, 6 Steps, Off through 5 (accessible through external control)
  • Aperture/Detail: 16 Steps (accessible through external control)
  • Control Interface(s):
    • RS-232 API: Modified VISCA Emulation (TTL signal level) Baud rate: 9600 bps and 38,400 bps, 1-Stop bit. Default to 9.6 Kb/s for Cat-5e Distance
    • Telnet Serial Command API
    • Internal Web page for Network Set-up, firmware updates and network management
    • Vaddio IR Remote Commander
  • Pan & Tilt Angle/Speed:
    • Pan/Tilt Angles: ±160°, Tilt: +90°, -30°,
    • Pan/Tilt Speeds: Both Axes 0.35°/sec to 120°/sec
  • Rear Panel Connectors:
    • Network: RJ-45 with Green & Yellow LED to show connection and usage
    • RS-232 Out: RJ-45, Carries bidirectional control to and from the camera
    • EZ Power Video: RJ-45 Shielded, carries power and differential video signals for the Quick-Connect Cat-5 systems
  • Rear Panel Controls:
    • 16-Position Rotary Switch for Resolution selection
    • 8-Position Dip Switch for IR Frequency, Image Flip, wide mode and Reset to Default Settings
  • Power Supply: Powered by Quick-Connect interfaces
  • Compatible Joystick and Video Control Consoles:
    • ProductionVIEW Precision Camera Controller
    • ProductionVIEW HD
    • ProductionVIEW HD MV with Integrated Multi-viewer,
    • ProductionVIEW HD-SDI MV with Integrated Multi-viewer
    • AV Bridge MATRIX PRO
  • Operating/Storage Temperature/Humidity: 0°C (32°F) to 40°C (104°F), 20% to 80%
  • Weight: 4.85 lbs.(2.199923 kg - Roughly 900 peanut M&Ms)
  • Dimensions:
    • Small (3 dimensions not counting space/time)
    • 6.942" H x 7.056 W x 6.757" D (176.3 x 179.2 x 171.6mm)

Quick-Connect Universal CCU

  • CCU Connectors:
    • Power Connector: 5.5mm OD x 2.5mm ID
    • Power RJ-45: Supplies 36VDC to Camera
    • RS-232 IN RJ-45: Accepts RS-232 from controllers
    • RS-232 OUT RJ-45: Passes RS-232 to Camera
    • Tally: 2-Pin Phoenix type spring cage connector
    • Video From Camera RJ-45: Accepts differential video from camera (only supports resolutions above 50 Hz)
  • Video Outputs:
    • HD-YPbPr on DE-15-F connector
    • HDMI on HDMI-F connector
    • HD-SDI on Edge Mount Carrier Class, Gold BNC-F (3Gb/s Single Link 1080p/60 HD-SDI)
  • Video Adjustments: Y-Gain (+/- up to 10 IRE luminance gain) for fine tuning over longer cable distances, Skew for cabling distance compensation, HDMI color space (YCbCr or sRGB)
  • Cat-5 Cable Maximum Distance: Up to 500ft (152.4m)
  • Power Supply: 36 VDC, 2.78 Amp
  • Dimensions:
    • 1-RU Rack Mount - 1.72" H x 18.93" W x 7" D (43.7mm x 480.1mm x 177.8mm)
      Rack Ears Included

Note: Specifications and pricing are subject to change without prior notice or obligation.

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM