ETC/Elec Theatre Controls 4M50LG-I-1
Source Four Mini LED Gallery 50° Fixture with Canopy Mount in White

OUR PART #  4M50LG-I-1

Big Source Four® attitude, yet small in size - ETC's 4M50LG-I-1 is a Source Four Mini™ that has everything you expect from the Source Four® brand - ease of use, superior optics, crystal-clear image projection and a bright, even field - but packaged in a tiny fixture that's just one-third the size of a traditional Source Four. A mere nine inches long, and available in both tungsten and LED, the Source Four Mini can go anywhere: museums, retail outlets, restaurants, light labs, children's theaters, and other small scale installations where size matters. This version is a Source Four Mini LED Gallery 50° fixture in a canopy mount design with an integral transformer that comes in white.   
The Source Four Mini LED can go where no full-sized Source Four® has gone before. ETC’s 12W Source Four Mini LED features the same crisp optics, user-friendly functionality and sleek look of the legendary Source Four fixture, but in a compact format at a fraction of the size. Surprisingly bright for its size, the Mini LED offers crystal-clear image projection and a bright, even field. 

NOTE: Product shown in image is for illustrative purposes only. Actual product has a 50° field lens .

Venues intended for the ETC 4M50LG-I-1 include:    

  • Museums    
  • Retail stores    
  • Restaurants    
  • Lobbies    
  • Light labs    
  • Theaters    

ETC 4M50LG-I-1 Features:    

  • Rugged, die-cast fixture body    
  • Interchangeable lens tubes permit selection of 19°, 26°, 36° and 50° field angles    
  • Uniquely efficient optical system    
  • Long-life dimmable white LED source     
  • Three-plane shutters    
  • Multiple accessories available for color, pattern, and filtering    
  • Multiple mounting options: C-clamp, canopy and track    
  • Custom paint colors available   
  • 9" long, 2.5" diameter   
  • 12W LED (35,000-hour life)   
  • E-size pattern holder   
  • Gel media frame   
  • Rotating barrel ± 175°   
  • Three-plane stainless-steel shutter blade assembly   
  • Tool-free lamp replacement   
  • Insulated rear handle   
  • Rugged die-cast aluminum construction   
  • Black, white, silver or custom colors available   
  • 4.5 x 1.5" color-matched canopy   
  • Canopy-mounting hardware for 4" ceiling junction box included   
  • 12V transformer or LED driver in canopy for hardwired 120V or 230/240V input    

ETC 4M50LG-I-1 Specifications:

  • Physical:
    • Die-cast aluminum construction (a380 grade)
    • Fine-texture, high-temperature powder-coated paint
    • Steel yoke with 0.406” diameter mounting hole
    • Rotating shutter assembly ±175°
    • E-size gobo pattern holder (included):
      • 37.5mm with a 25.4mm image area
    • Stainless steel, full hard shutters in a tri-plane assembly, 0.40mm (a301 grade)
    • Fixed-beam angles to suit a range of throw distances
    • Tool-free tilt and beam adjustment
    • High-impact resistant, thermally insulated knobs and shutter handles
    • Captive accessory slot for pattern holder (included)
    • Dual captive accessory slots for media frame (included)
    • Portable:
      • Yoke-mounted leD driver in color-matched enclosure
      • Miniature C-clamp mounting (included)- for use with 3/8” to 1” pipe (0.675” to 1.315” oD)
      • Three-foot power cable with nema 5-15P connector
    • Install canopy:
      • Color-matched, powder-coated canopy mount with LED driver (included)
      • Canopy dimensions: 5.31” (W) x 1.04” (H)
      • Installation hardware included
      • Fixture to canopy factory pre wired for easy install
      • Built-in rotation stop to prevent cable damage
    • Track mount:
      • Compatible and ETL-listed for EUTRAC brand track
      • EUTRAC (#98-549) two-circuit track adapter included
      • LED factory-installed in color-matched adapter (black adapter for silver fixtures)
      • Black or white power lead
  • Electrical:
    • Power at full intensity: 12W typical, 14W max
    • 18 AWG input wire size
    • Input voltage options:
      • 90-135V, 50/60Hz
      • 190-250V, 50/60Hz
    • Dimmable (forward and reverse phase)
    • Inrush (first half-cycle):
      • 120V: 3A
      • 240V: 4A 
  • Lamp:
    • Cree LED (available in 80+ and 90+ CRI)
    • Long-life lamp: 35,000 hours L70 lumen maintenance
    • 3000K color temperature
  • Optical: 
    • Fixed-beam options of 19°, 26°, 36° and 50° field angles
    • Projector-quality, high-contrast lenses
    • Beam edge continually adjustable hard to soft
  • Thermal:
    • 0°C to +40°C
Add to Cart

We're sorry, only of this item available

Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM