Audio-Technica ATW-1311
System 10 PRO Rackmount Dual-Channel Digital Wireless Bodypack System with (2) ATW-T1001 Bodypack Transmitters

OUR PART #  ATW-1311

Audio-Technica’s ATW-1311, part of the System 10 PRO Rackmount digital wireless series, provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.

Like all the products in the System 10 wireless family, the PRO Rackmount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity.

The ATW-1311 includes an ATW-RC13 receiver chassis with rackmount adapters, two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only), one RJ12 cable, one AC adapter and two ATW-T1001 UniPak® bodypacks. Both the receiver chassis and transmitters feature easy-to-read displays.

Audio-Technica ATW-1311 Includes:

  • AC adapter
  • Link cable
  • Rack-mount adapters
  • Joining plate
  • Rubber feet

Audio-Technica ATW-1311 Features:

  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
  • Operates in the 2.4 GHz range – completely free from TV interference
  • Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
  • Up to five chassis (ten receiver units) can be linked and used simultaneously
  • Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
  • Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, and setup
  • Three levels of diversity assurance: frequency, time & space
  • Ground-lift switch helps eliminate audible hum caused by ground loops

Audio-Technica ATW-1311 Specifications:

  • Overall System:
    • Operating Frequencies: 2.4 GHz ISM band
    • Dynamic Range: > 109dB (A-weighted), typical
    • Total Harmonic Distortion: < 0.05% typical
    • Operating Range: 200 ft (60 m) Open range env. with no interfering signals
    • Operating Temperature Range: 32°F to 104°F (0°C to +40°C) Battery performance may be reduced at very low temperatures
    • Frequency Response: 20 Hz to 20 kHz (Depending on microphone type)
  • Receiver Specifications:
    • Receiving System: Diversity (frequency/time/space)
    • Output Connectors: Remote Receiver Connector: RJ45
    • Link Connector: RJ12
    • Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
    • Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
    • Dimensions (WxHxD): 8.26" x  1.73" x  6.67" (209.8 x 44 x 169.3mm)
    • Net Weight: 33.2 oz (940 grams)
  • Bodypack Transmitter Specifications:
    • RF Power Output: 10 mW
    • Spurious Emissions: Following federal and national regulations
    • Input Connections - Four-pin Locking Connector:
      • Pin 1: GND
      • Pin 2: INST INPUT
      • Pin 3: MIC INPUT
      • Pin 4: DC BIAS +9V
    • Batteries: Two 1.5V AA (not included)
    • Battery Life: > 7 hours (alkaline) Depending on battery type and use pattern
    • Dimensions (WxHxD): 2.76" x 4.21" x 0.98" (70.2 x 107.0 x 24.9mm)
    • Net Weight: 3.5 oz (100 grams) without batteries

Consumer Alert
Please be aware that certain systems or transmitters operating in the 617-652MHz or 663-698MHz frequency ranges are no longer in compliance with recent regulations set forth by the Federal Communications Commission (FCC). Contact our Sales Pros at 800-356-5844 for help choosing a compliant wireless system that fits your needs and to learn about available trade-in rebates. Details on current wireless regulations are available at

WARNING: Cancer and Reproductive Harm -

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM