Martin Professional MAC Aura XB
Compact LED Wash Light Fixture

OUR PART #  MAC-AURA-XB


The Martin Professional MAC Aura XB takes an innovative, compact LED wash light to the next level, incorporating many features first introduced with the MAC Quantum Wash™. Not only does the MAC Aura XB offer additional brightness, it also features a superior color mixing system and an optimized lens design for tighter beams and more even washes. Martin's unique and patented Eye-candy Aura Effects™ are also part of the package.

Martin Professional MAC Aura XB Features:

  • Super-bright single lens wash with fully premixed color
  • Compact design and low weight (6.5 kg)
  • High efficiency, low power consumption, long service life
  • Broad color palette, RGBW color mixing
  • Eye-candy Aura Effects™
  • Uniform shades
  • Built-in FX engine
  • 10 to 60° uniform zoom
  • 6000 Lumens output
  • Rapid movement

Martin Professional MAC Aura XB Specifications:

  • Optics and Photometric Data:
    • Light source: 15 W RGBW array system
    • LED refresh rate: Beam 1200 Hz, Aura 4395 Hz
    • Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
      *Figure obtained under manufacturer´s test conditions
    • Total luminous output (wide, one-tenth peak): 6.0 Klm
    • Total luminous output (narrow, one-tenth peak): 4.3 Klm
    • Video compatibility: Designed for use with HD/high-speed video cameras
  • Physical:
    • Dimensions (LxWxH): 11.9" (across yoke) x 11.9" (across yoke) x 14.2" (head straight up) (302 x 302 x 360 mm)
    • Weight: 14.4 lbs (6.5 kg) without accessories
  • Dynamic Effects:
    • Beam color mixing: RGBW
    • Aura (secondary lens array illumination) color mixing: RGB
    • Beam color temperature control: CTO, variable 10 000 - 2500 K
    • Beam and aura electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
    • Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
    • Pre-programmed effects: Range of independent and synchronized Beam and Aura FX, two combinable
    • Electronic dimming: Independent beam and aura, four dimming curve options
    • Zoom: 10° - 60° (one-tenth peak angle)
    • Pan: 540°
    • Tilt: 232°
    • Pan and tilt speed: Adjustable via onboard control panel and DMX
  • Control and Programming:
    • Control options: Independent or synchronized Beam and Aura control
    • Control system: DMX, RDM
    • Control resolution: 8-bit, with 16-bit control of pan & tilt
    • DMX channels: 14/25
    • Setting and addressing: Control panel with backlit graphic display
    • DMX compliance: USITT DMX512-A
    • RDM compliance: ANSI/ESTA E1.20
    • Transceiver: RS-485
    • Firmware update: Via DMX with Martin™ USB Duo DMX Interface Box
  • Construction:
    • Color: Black
    • Housing: High-impact thermoplastic, flame-retardant to UL 94 5VA
    • Protection rating: IP20
  • Installation:
    • Mounting points: M12 hole for rigging clamp, attachment points for surface-mounting bracket
    • Orientation: Any
    • Minimum distance to combustible materials: 200 mm (8 in.) from fixture
    • Minimum distance to illuminated surfaces: 1 m (3 ft. 4 in.) from fixture
    • Location: Indoor use only, must be fastened to surface orstructure
  • Connections:
    • AC power: Neutrik PowerCON TRUE1 NAC3PX dual socket AC power input socket accepts Neutrik PowerCON TRUE1 NAC3FX-W cable connector AC power thru socket accepts Neutrik PowerCON TRUE1 NAC3MX-W cable connector
    • DMX data in/out: 5-pin locking XLR
  • Electrical:
    • Maximum power consumption: 400 W
    • Power supply unit: Auto-ranging electronic switch mode
    • AC power: 100-240 V nominal, 50/60 Hz
    • Typical half-cycle RMS inrush current: 10.7 A
    • Power consumption, all effects static, zero light output:: <25W
  • Typical Power and Current:
    • 100 V, 60 Hz: 359 W, 3.8 A, PF 0.99
    • 120 V, 60 Hz: 355 W, 3.2 A, PF 0.99
    • 208 V, 60 Hz: 350 W, 1.8 A, PF 0.97
    • 230 V, 50 Hz: 349 W, 1.7 A, PF 0.95
    • 240 V, 50 Hz: 349 W, 1.6 A, PF 0.95
      Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
  • Thermal:
    • Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
    • Maximum ambient temperature (Ta max.): 40° C (104° F)
    • Minimum ambient temperature (Ta min.): 5° C (41° F)
    • Total heat dissipation (calculated, +/- 10%): 1230 BTU/hr.
  • Approvals:
    • EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
    • EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
    • US safety: UL 1573
    • US EMC: FCC Part 15 Class A
    • Canadian safety: CSA E598-2-17 (CSA E60598-1)
    • Canadian EMC: ICES-003 Class A
    • Australia/NZ: C-TICK N4241
  • Included Items: M12 bolt suitable for use with Martin rigging clamps
    Note: power cables and connectors are not included and must be ordered separately
  • Related Items:
    • Martin USB Duo™ DMX Interface Box: P/N 90703010
    • Martin DMX 5.3 Splitter™: P/N 90758140
    • Martin RDM 5.5 Splitter™: P/N 90758150
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM