ETC/Elec Theatre Controls S4LEDS2DHDS-0-X
Source Four LED Series 2 Daylight HD with Shutter Barrel and Bare-End Connector

OUR PART #  S4LEDS2DHDS-0-X


The Source Four LED Series 2 is part of ETC's evolution in the field of LED lighting. While this high-output non-variable while light fixture may look the same on the outside, the Series 2 offers even more of what makes the Source Four LED one of the best LED profile luminaires available. This version, the S4LEDS2DHDS-0-X features a Daylight HD light engine that comes with a shutter barrel all in the color black and offers a Bare-End (no connector) power input cable.    

NOTE: This fixture is for use with fixed-field lens tubes only

With optimized arrays and finely-tuned electronics, the Series 2 offers a combination of light quality and output that is tough to match. The Source Four LED Series 2 Daylight HD array is designed for broadcast lighting, offering flicker-free operation and high-definition lighting. With a new mix of LED emitters, the luminaires output is significantly brighter than the original Source Four LED white-light arrays. The Daylight HD array produces variablecool white (4000 to 6500K) light that imitates natural daylight. It offers tint control, so it can be tweaked to perfectly illuminate individual skin tones.     

NOTE: Product shown in image is for illustrative purposes only. Actual product may vary in appearance.

Series 2 light engines work with all Source Four lens tubes to deliver a high-quality, controllable beam of LED light. For the best results, it is highly recommended that EDLT versions are used. ETC also offers a special LED-only version of the 50° lens tube.     

NOTE: See Attached for Product Specifications 

ETC S4LEDS2DHDS-0-X Features:

  • 60 Luxeon® Rebel LED emitters    
  • 20,000-hour L70 Rating    
  • 3 arrays: Lustr, Daylight HD and Tungsten HD         
  • Includes slots for glass or stainless steel patterns and soft focus diffuser         
  • Accessory slot for motorized pattern devices or optional iris    
  • Power and DMX in/thru connections for easy setup        
  • Up to nine fixtures (15A max) may be linked via powerthru connector (10 fixtures total per circuit) when used with R20 Relay Moduleor Unison Echo Relay Panel.    
  • DMX512 in/thru via five-pin XLRconnectors    
  • Multiple control options, including RGB, strobe, and console-free Master/Slave mode          
  • 15-bit virtual dimming engine for smooth fades and minimal color shift during dimming         
  • ETL Listed to UL1573; IP20 rated         
  • Available in black (standard), white or silver, or custom fixture-body colors         

NOTES about LED Luminaires:     

  • All LED sources experience some lessening of light output and some colorshift over time. LED output will vary with thermal conditions. Based on the LED manufacturer’s B50 L70 specification, a Source Four LED Series 2 luminaire will achieve ~70% of its initial output after 20,000 hours of typical usage. In individual situations, LEDs will be used for different durations and at different levels. This can eventually lead to minor alterations in color performance, necessitating slight adjustments to presets, cues or programs.          
ETC/Elec Theatre Controls S4LEDCYC Source Four LED CYC Lens Adapter

ETC/Elec Theatre Controls S4LEDCYC Source Four LED CYC Lens Adapter

The Source Four LED™ just got even more versatile. By removing the luminaire’s lens barrel and attaching a Source Four LED CYC adapter, any Source Four LED can become a superior tool for lighting cycloramas. Other cyc lights only serve ...
Log In For Price
In Stock
ETC/Elec Theatre Controls 410LT Source Four, 10 Degree Lens Tube with Lens Installed

ETC/Elec Theatre Controls 410LT Source Four, 10 Degree Lens Tube with Lens Installed

This is a 10 degree Lens Tube with lens installed that comes in a black finish. It emits a narrow beam of light and is intended to be used with Source Four fixtures.
Log In For Price
In Stock
ETC/Elec Theatre Controls 414LT Source Four, 14° Black Lens Tube with Lens Installed

ETC/Elec Theatre Controls 414LT Source Four, 14° Black Lens Tube with Lens Installed

This accessory from ETC is a 14° lens tube assembly with the lens installed that comes in with black finish. When used with a Source Four fixture it produces a narrow spread light pattern.
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls 470LT Source Four Lens Tube, 70 degree, Black

ETC/Elec Theatre Controls 470LT Source Four Lens Tube, 70 degree, Black

The 470LT is from the Source Four Ellipsoidal Series of lights from ETC. It's an accessory that is a 70-degree lens tube assembly with the lens installed that comes in a black finish. When used with a Source Four Ellipsoidal Series ...
Log In For Price
In Stock
ETC/Elec Theatre Controls LED50LT 50° LED Specific Black Source Four Lens Tube

ETC/Elec Theatre Controls LED50LT 50° LED Specific Black Source Four Lens Tube

NOTE: Product shown in image is for illustrative purposes only. Actual product may vary in appearance. This is a 50° LED specific EDLT (Enhanced Definition Lens Tube) with lenses installed that's designed for the Source Four LED series ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls 436EDLT 36 Degree Source Four Enhanced Definition Lens Tube in Black

ETC/Elec Theatre Controls 436EDLT 36 Degree Source Four Enhanced Definition Lens Tube in Black

NOTE: Product shown in image is for illustrative purposes only. Actual product may vary in appearance. When your lighting situation requires even more precise optics for projecting images, gobos, and logos, the Source Four EDLT (Enhanced ...
Log In For Price
In Stock
ETC/Elec Theatre Controls 426EDLT 26 Degree Enhanced Definition Lens Tube (EDLT) in Black

ETC/Elec Theatre Controls 426EDLT 26 Degree Enhanced Definition Lens Tube (EDLT) in Black

When your lighting situation requires even more precise optics for projecting images, gobos, and logos, the Source Four EDLT (Enhanced Definition Lens Tube) option is an invaluable addition to your Source Four inventory. This version ...
Log In For Price
In Stock
ETC/Elec Theatre Controls 419EDLT 19 Degree Source Four EDLT with Lens Installed in Black

ETC/Elec Theatre Controls 419EDLT 19 Degree Source Four EDLT with Lens Installed in Black

When your lighting situation requires even more precise optics for projecting images, gobos, and logos, the Source Four EDLT (Enhanced Definition Lens Tube) option is an invaluable addition to your Source Four inventory. The EDLT attaches ...
Log In For Price
In Stock
ETC/Elec Theatre Controls 400RS Drop In Iris for Source Four

ETC/Elec Theatre Controls 400RS Drop In Iris for Source Four

This accessory is a Drop In Iris for 5-90 degree Source Four light fixtures.
Log In For Price
In Stock
ETC/Elec Theatre Controls DPA-X 5' ETC PowerCon to Bare-End Power Input Lead

ETC/Elec Theatre Controls DPA-X 5' ETC PowerCon to Bare-End Power Input Lead

The DPA-X from ETC is a Powercon to Bare End 5' cable with a UL 1573 rating (for stage and sudio luminaires and connector strips.) This item is compatible with the following ETC products: ColorSource PAR Source Four LED Desire D40 ...
Log In For Price
In Stock
ETC/Elec Theatre Controls 400TH Black Top Hat, 5" Tube

ETC/Elec Theatre Controls 400TH Black Top Hat, 5" Tube

This accessory is a black Top Hat with a 5" tube that intended to be used with 19-50 degree Source Four and Source Four jr fixtures.
Log In For Price
In Stock
ETC/Elec Theatre Controls 400CC C-Clamp for ETC Fixtures, Black

ETC/Elec Theatre Controls 400CC C-Clamp for ETC Fixtures, Black

This C-Clamp from ETC is useful for mounting and locking lighting fixtures to a grid pipe and includes an M12 thread screw for the fixture yoke.
Log In For Price
In Stock
ETC/Elec Theatre Controls 400PH-G B Size Pattern Holder - Glass

ETC/Elec Theatre Controls 400PH-G B Size Pattern Holder - Glass

This Source Four accessory is a Glass Pattern Holder (B Size) for 5-90 Degree Source Four Fixtures.  Specifications: X = 2.75” Y = 3.75”
Log In For Price
In Stock
ETC/Elec Theatre Controls 400SC 30" Source Four Safety Cable in Black

ETC/Elec Theatre Controls 400SC 30" Source Four Safety Cable in Black

This black safety is 30" in length and is a useful Source Four fixture accessory.Specifications: Cable is a 30" long, 1/8" diameter black wire rope cable with snap clamp fitted. The safety ratio of the cable is 5:1 The breaking load ...
Log In For Price
In Stock
ETC/Elec Theatre Controls 400PH-A Pattern Holder - Size A

ETC/Elec Theatre Controls 400PH-A Pattern Holder - Size A

This Source Four accessory is an A size for 5º-90º Source Four fixtures.Specifications:  X = 3.25” Y = 3.75”
Log In For Price
In Stock
ETC/Elec Theatre Controls 400PH-B Pattern Holder - Size B

ETC/Elec Theatre Controls 400PH-B Pattern Holder - Size B

This Source Four accessory is a B size Pattern Holder for 5º-90º Source Four fixtures.Specifications:  X = 2.75” Y = 3.75”
Log In For Price
In Stock
ETC/Elec Theatre Controls 407CF Gel Frame for Source Four PAR

ETC/Elec Theatre Controls 407CF Gel Frame for Source Four PAR

This Source Four PAR accessory is a Color Frame that comes with a black finish.
Log In For Price
In Stock
ETC/Elec Theatre Controls 400DN Donut

ETC/Elec Theatre Controls 400DN Donut

This Source Four fixture accessory is a 6.25-inch donut that controls flare in template projections.NOTE: Use A-size pattern holder with Source Four for maximum pattern effectiveness.
Log In For Price
In Stock
ETC/Elec Theatre Controls 400CF Color Frame for the Source Four

ETC/Elec Theatre Controls 400CF Color Frame for the Source Four

Product shown in image is for illustrative purposes only. Actual product may vary in appearance.Color Frame for the Source Four.
Log In For Price
In Stock
ETC/Elec Theatre Controls S4LEDFRES  Source Four LED Fresnel Adapter

ETC/Elec Theatre Controls S4LEDFRES Source Four LED Fresnel Adapter

The ETC Source Four LED Fresnel adapter fits any Source Four LED light engine and creates tunable-white or brightly-colored washes with soft edges. The light blends evenly – with smooth overlap and uniform distribution – for washes ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls 490LT 90° Black Source Four Lens Tube

ETC/Elec Theatre Controls 490LT 90° Black Source Four Lens Tube

This is a replacement or spare 90° lens tube assembly with lens installed for Source Four Ellipsoidal fixtures that comes in a black finish. NOTE: Source Four lens tubes ship with color frames. 14°, 70°, and 90° lens tubes use a ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls S4LED-SWD14 Smooth Wash Diffuser for 5 Degree Lens Tube

ETC/Elec Theatre Controls S4LED-SWD14 Smooth Wash Diffuser for 5 Degree Lens Tube

This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The smooth wash diffuser is placed into the gel frame slot of the lens tube. This type ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC/Elec Theatre Controls DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC's DPJ-10 is a 10 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls DPJ-5  5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC/Elec Theatre Controls DPJ-5 5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC's DPJ-5 is a 5 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls S4LED-SWD12 Smooth Wash Diffuser for 10 Degree Lens Tube

ETC/Elec Theatre Controls S4LED-SWD12 Smooth Wash Diffuser for 10 Degree Lens Tube

This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The smooth wash diffuser is placed into the gel frame slot of the lens tube. This ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls S4LED-SWD7 Smooth Wash Diffuser for 7.5 Gel Frame

ETC/Elec Theatre Controls S4LED-SWD7 Smooth Wash Diffuser for 7.5 Gel Frame

This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The Smooth Wash Diffuser is placed into the gel frame slot of the lens tube. This type ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls S4LED-SWD6 Smooth Wash Diffuser for 6.25 Gel Frame

ETC/Elec Theatre Controls S4LED-SWD6 Smooth Wash Diffuser for 6.25 Gel Frame

This Source Four LED accessory is a Smooth Wash Diffuser that is used when extra-smooth blending of multiple Source Four LED fixtures is required. The Smooth Wash Diffuser is placed into the gel frame slot of the lens tube. This type ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls 400HH Black Half Hat

ETC/Elec Theatre Controls 400HH Black Half Hat

This Source Four accessory is a black Half Hat that measures 7x7x6 inches. Like the Top Hat this unit helps to control and reduce flare but from one side only.
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls S4LED-SFD Source Four LED Soft Focus Diffuser

ETC/Elec Theatre Controls S4LED-SFD Source Four LED Soft Focus Diffuser

The Soft Focus Diffuser is a diffuser that is an accessory for Source Four LED fixtures that fits into a standard A-Size pattern holder and delivers beautiful homogenized light when not in sharp focus. You can also use this diffuser with ...
Log In For Price
Usually ships in 7-14 business days.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM