MyMix MIXPACK4
Mix Pack 4 4 myMix Unit Package with 1x TPE-S80 PoE Switch

OUR PART #  MIXPACK4

Mix Pack 4 4 myMix Unit Package with 1x TPE-S80 PoE Switch 1Mix Pack 4 4 myMix Unit Package with 1x TPE-S80 PoE Switch 2Mix Pack 4 4 myMix Unit Package with 1x TPE-S80 PoE Switch 3
Mix Pack 4 4 myMix Unit Package with 1x TPE-S80 PoE Switch 4Mix Pack 4 4 myMix Unit Package with 1x TPE-S80 PoE Switch 5Mix Pack 4 4 myMix Unit Package with 1x TPE-S80 PoE Switch 6
Click an image to see more images(7).



The myMix Mix Pack 4 starter package contains everything needed* to provide individual stereo mixes and multi-track recording for four (or more)  musicians. Four myMix units provide eight inputs to connect and label microphone (phantom power available) and line level sources.  All devices get connected with a CAT5* cable to the TPE-S80 POE switch. If you want to share the input signals with a console you can split the signal from DI-boxes for line level and use y-cable (or a mic split box) for microphones.  If you have more than four people on stage, consider using a 4-ch headphone amp and share a mix (e.g. for the vocalists). The TPE-S80 provides power for 8 myMix units, so you can add 4 more myMix or 3 myMix and an IEX16 input expander to have more individual mixes and more audio channels available. Should you ever outgrow this system all you need to get is a larger switch with more ports.
*CAT5 and audio input cables are not included in the package.

myMix Mix Pack 4 Features:

  • Includes 4 myMix units, 1 TPE-S80 switch
  • 8 audio inputs (4 x 2)
  • 4x Multi-Track Recording and Playback
  • Includes mic stand adapters and power supplies 
  • Easy to expand by adding more myMix

The two applications examples show that with some accessories 4 myMix can help an 7 piece band, and adding one more myMix a 8 piece band gets started with 5 myMix.

About the myMix

Personal mixer station for myMix systems. Select up to 16 unique channels to mix from all available network channels. Adjust channel volume, tone, effect send (from a choice of reverbs or an adjustable delay), and pan without affecting any other station on the network. Two mic/line inputs with input gain adjustment, input LEDs with signal and overload indicators (overload indicator also flashes red on channel name), switchable phantom power. Two line-level balanced 1/4" TRS outputs and one 1/8" (3.5mm) headphone output. Store up to 20 named profiles on each station. 4-band fully parametric stereo output EQ with selectable high and low shelving filters. Record up to 18 tracks (16 individual channels + your stereo mix) of multi-track audio to SD card, 24 bit, 48kHz time-stamped uncompressed .wav files.

myMix Features:

  • Individual stereo mixes for each musician with up to 16 channels of audio
  • Individual channel selection from network
  • Send Mix to Network
  • Up to 16 +2 tracks of recording and playback (with optional SDHC card)
  • Intuitive interface with full color LCD display
  • Networked via standard or PoE Fast Ethernet switches
  • Dual mic/line inputs with 48v phantom power
  • Separate headphone and stereo line outputs
  • Mounts easily to microphone stands with included adapter
  • Covenient Remote Control with optional myMix CONTROL Software

myMix Specifications:

Inputs

  • Impedance (Microphone / Line): 2 K Ohms / 20 K Ohms
  • Input Gain (Microphone): variable from +4 dB to +60 dB
  • Input Gain (Line):  variable from -16dB to +40 dB
  • Maximum Input Level (Mic/Line):  +14dBu / +34 dBu
  • Frequency Response: 20 Hz to 20 kHz (+0dB, -1dB)

Outputs

  • Impedance (Line / Headphone Outputs):  75 Ohm balanced / to drive > 16 Ohm
  • Max Output Level (Line): +21 dBu
  • Signal to Noise Ratio:  > 104 dB
  • THD +N (Microphone Input to Line Out):  <0,022%
  • Cross talk (L to R):  < -80 dB
  • Mute:  > 100 dB

System Network

  • Network Type: Fast Ethernet 100 Mbps
  • Network Cabling:  Cat 5
  • Network Latency:  <1 ms
  • AD/DA Conversion:  24-bit

Recording

  • Recording Media:  SD or SDHC card
  • Recording Format:  wav file, 24-bit, 48kHz sampling rate

Connectors

  • Microphone Input:  Balanced XLR (1 gnd, 2 pos, 3 neg)
  • Line Input:  Balanced ¼” jack (tip pos, ring neg, sleeve gnd)
  • Line Output:  Balanced ¼” jack (tip pos, ring neg, sleeve gnd)
  • Headphone Output:  3.5mm stereo jack
  • System Network:  RJ45

Weight and Dimensions

  • Net Size (excl. mic stand adaptor): 5.3" W x 6.7" H x 2.4" D (134 x 171 x 60 mm)
  • Net Weight (excl. mic stand adaptor): 1.1 lbs (0.5 kg)
  • Package Dimensions: 6.8" W x 11" H x 3.2" D (172 x 280 x 80 mm)
  • Package Weight:  2 lbs (0.9 kg)
  • Included Accessories:
    • myMix PSU (24V, 12W)
    • myMix microphone stand adaptor
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM