Audio-Technica ATW-1101/H92-TH
System 10 2.4 GHz Wireless System with Pro92cW-TH Headworn Microphone, Beige

OUR PART #  ATW-1101/H92-TH

Audio-Technica's ATW-1101/H92-TH is part of their System 10 digital high-fidelity wireless series engineered to provide advanced 24-bit operation, easy setup, and clear, natural sound quality for performing musicians, presenters, and more. This system operates in the 2.4 GHz range – far from TV and DTV interference – and offers extremely easy operation along with instantaneous channel selection. Up to 8 channels may be used together without any frequency coordination problems or group selection issues. Receivers and transmitters come equipped with an easy-to-read digital ID display.

System 10 wireless delivers clear communications by implementing 3 levels of signal diversity assurance: frequency, time, and space:

  • Frequency Diversity sends the signal on 2 dynamically allocated frequencies for interference-free communication
  • Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference
  • Space Diversity uses 2 antennas on each transmitter and receiver to maximize signal integrity

Audio-Technica ATW-1101/H92-TH Includes:

  • ATW-R1100 receiver
  • ATW-T1001 UniPak® transmitter
  • PRO 92cW-TH headworn microphone (beige)
  • Power supply for receiver

Audio-Technica ATW-1101/H92-TH Features:

  • Digital 24-bit/48 kHz wireless operation for ultimatesound quality and dependable performance
  • 2.4 GHz range – completely free from TV interference
  • Three levels of diversity assurance: frequency, time, and space
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, andset-up
  • State-of-the-art digital receiver for reliable performance
  • Balanced XLR and unbalanced 1/4” output jacks with level control

Audio-Technica ATW-1101/H92-TH Specifications:

Overall System

  • Operating Frequencies: 2.4 GHz ISM band
  • Dynamic Range: >109 dB (A-weighted), typical
  • Total Harmonic Distortion: <0.05% typical
  • Operating Range: 100ft (30m) typical
    • Open range environment with no interfering signals
  • Operating Temperature Range: 32°F to 104°F (0°C to +40°C)
    • Battery performance may be reduced at very low temperatures
  • Frequency Response: 20 Hz to 20 kHz
    • Depending on microphone type

ATW-R110 Receiver

  • Receiving System: Diversity (frequency/time/space)
  • Maximum Output Level:
    • XLR, balanced: 0 dBV
    • 1/4" (6.3 mm), unbalanced: +6 dBV
  • Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
  • Dimensions (W x H x D): 7.48" x 1.82" x 5.06" (190 x 46.2 x 128.5mm)
  • Net Weight: 10.2 oz. (290 g)

ATW-T1001 UniPak® Transmitter

  • RF Output Power: 10 mW
  • Spurious Emissions: Following federal and national regulations
  • Input Connection: 4-pin Locking Connector:
    • Pin 1: GND
    • Pin 2: INST INPUT
    • Pin 3: MIC INPUT
    • Pin 4: DC BIAS +9V
  • Batteries (not included): Two 1.5V AA
  • Battery Life: >7 hours (alkaline)
    Depending on battery type and use pattern
  • Dimensions (W x H x D): 2.76"  x 4.21" x 0.98" (70.2 x 107.0 x 24.9mm)
  • Net Weight (without batteries): 3.5 oz. (100 g)

PRO-92cW-TH Headworn Microphone

  • Element: Condenser
  • Polar Pattern: Omnidirectional
  • Frequency Response: 20-20,000 Hz
  • Open Circuit Sensitivity: –45 dB (5.6 mV) re 1V at 1 Pa*
  • Maximum Input Sound Level: 116 dB SPL, 1 kHz at 1% T.H.D.
  • Signal-to-Noise Ratio: 60 dB, 1 kHz at 1 Pa*
  • Current Consumption: 0.3 mA typical @ 5V
  • Voltage Range: 1.5-9V
  • Weight:
    • Mic & Boom: 0.14 oz. (4.0 g)
    • Mic, Boom, Connector, and Cable: 0.84 oz. (24.0 g)
  • Dimensions:
    • Microphone (L x Ø): 0.85" x 0.36" (21.7 x 9.2mm)
    • Boom (L x Ø): 4.33" x 0.09" (110.0 x 2.4mm)
  • Cable Length: 55" (1.4m)
  • Cable Termination: Terminated with locking 4-pin connector for use with A-T UniPak® body-pack transmitters

Consumer Alert
Please be aware that certain systems or transmitters operating in the 617-652MHz or 663-698MHz frequency ranges are no longer in compliance with recent regulations set forth by the Federal Communications Commission (FCC). Contact our Sales Pros at 800-356-5844 for help choosing a compliant wireless system that fits your needs and to learn about available trade-in rebates. Details on current wireless regulations are available at

WARNING: Cancer and Reproductive Harm -

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM