Community V2-6WT
6.5" 250W 8Ohm Speaker in White with 200W Autoformer


The V2-6 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. Compact but powerful, it is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. When paired with a subwoofer such as the V2-210S, a V2-6 system will produce high-fidelity, broad spectrum sound that belies its modest size. The V2-6 is also an excellent choice for ancillary delay applications. When used to augment a FOH system in such venues as auditoria, theaters and houses of worship,
delay loudspeakers can significantly even-out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying V2-6 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The V2-6 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device.

Note: Product shown in image is for illustrative purposes only - actual product is white.

An optional model with a built-in 100W autoformer with taps at 100W, 50W, 25W and 12.5W (model V2-6T) is also available from the factory.

Community V2-6BT Features:

  • DYNA-TECH™ driver protection circuitry
  • Ferrofluid-treated HF driver for improved heatdissipation
  • Carbon Ring Cone Technology provides 30% more pistonarea with increased excursion capability
  • Rotatable square horn
  • Terminal strip and NL4-compatible connectors
  • Available in standard black or white finishes
  • Mounting yoke included with 10° and 20° verticalstandoffs
  • Optional V2-6T autoformer model for 70V/100V applications

Community V2-6BT Specifications:

  • Loudspeaker Type: Compact two-way, full-range,trapezoidal, vented bass, user rotatable horn
  • Operating Range: 90 Hz to 18 kHz (-10 dB)
  • Frequency Response: 110 Hz to 16 kHz (±3 dB)
  • Max Input Ratings: 100W continuous, 250W program
  • 28.3 volts RMS, 56.6 volts momentary peak
  • Sensitivity (1W/1m): 92 dB (100 Hz to 12.5 kHz) freespace
  • Maximum Output: 112 dB SPL / 118 dB SPL (peak)
  • Nominal Impedance: 8 ohms
  • Minimum Impedance: 6 ohms @ 200 Hz
  • Nominal –6dB Beamwidth: 90° H x 70° V (in verticalposition)
  • Crossover Frequency: 1.3 kHz
  • Recommended Signal Processing: 100 Hz, 24 dB/octaveButterworth high pass filter
  • Drivers:
    • LF 1 x 6.5-inch cone
    • HF 1 x 1-inch
  • Driver Protection: DYNA-TECH protection circuitry
  • Input Connection: NL4-compatible locking connectorwith terminal strip in parallel
  • Controls: None
  • Enclosure: Trapezoidal (22.5° included angle) 18mm,11-ply cross-laminated birch
  • Mounting/Rigging Provisions:
    • 9 x M6 threaded rigging fittings
    • 4 x M6 threaded fittings for V-HSS and third-party suspension products
  • Finish: Catalyzed polyester two-part paint, black orwhite
  • Grille: Powder coated steel, black or white finish
  • Required Accessories: None
  • Supplied Accessories:
  • Yoke-style mounting bracket with optional 10° and 20°standoffs that allow a 10° or 20° downward or upward vertical tilt
  • Optional Accessories:
    • CMKIT ceiling mount kit
    • V-HSS handle and stand socket
    • VB-TILT tilting bracket
    • VB-VY6 vertical yoke bracket
    • M6EYBLTKIT 6mm eyebolt kit
  • Dimensions:
    • Height: 15.5 inches (395 mm)
    • Width: 9.8 inches (249 mm)
    • Depth: 10.1 inches (258 mm)
  • Weight (incl. bracket):
    • 19.7 lbs (8.9 kg)
    • 21.7 lbs (9.9 kg) with autoformer
  • Model Options:
    • V2-6B (low impedance, black finish)
    • V2-6W (low impedance, white finish)
    • V2-6BT (built-in autofomer for 70V100V applications, black finish)
    • V2-6WT (built-in autofomer for 70V100V applications, whitefinish)

WARNING: Cancer and Reproductive Harm -

Click to download

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM