ETC/Elec Theatre Controls SELD40VI-0A-B
Selador Desire D40 Vivid LED in Black, Stage Pin Connector

OUR PART #  SELD40VI-0A-B


This is from ETC's Desire Series of lighting and is a D40 Vivid wash fixture – for high-intensity color mixing across the spectrum for widest color wash use. This model has a usage rating of IP20 (interior) and comes in a black finish with a two pin and ground (stage pin) connector.

The Desire D40 luminaire combines 40 Luxeon® Rebel emitters onto one unit, for bright, efficient lighting. The PAR-shaped washlight is a multipurpose tool that can be combined into a rig with conventional fixtures or used by itself. The user-interface on the rear of the unit puts the control in your hands – Desire luminaires can be managed by any RDM-enabled controller or on their own.

Each fixture offers Quick Setup options, so you can quickly and easily adjust the luminaire’s performance. Stage, XT (Exterior)/Architectural, High-Impact, Studio and General settings further customize the light output for specific uses.

‘LED lighting doesn’t have to be ugly.’ That’s the philosophy behind the x7 Color System™ technology built into every Desire luminaire. While other LED fixtures on the market produce muted colors with a small range of hues and unnatural white light that makes everything look gray and washed out, Desire luminaires offer unprecedented color capabilities for beautiful, pure light. By combining up to seven LED colors per fixture, the x7 Color System creates a balanced blend of deep, saturated colored or natural white light. And with the Desire luminaires, you get even more color flexibility through the Adaptive Color Control system.

There are five DMX profiles to choose from – Calibrated RGB, Calibrated HSI, Calibrated HSIC, Direct, and Studio – so you can decide how the luminaires will perform. The additional Red Shift option allows the Desire fixtures to mimic a tungsten fade, and the Plus 7 Mode gives you control over each LED color to increase or decrease individual colors. Using the built-in color-pickers on ETC lighting control consoles, you can pick a gel match for the Desire fixtures to produce, or you can modify the color to get the exact shade you want. D40’s rugged die-cast enclosure, noiseless fan-free operation, multiple lens options and advanced user interface make it ideal for multiple applications.

ETC SELD40VI-0A-B Features:

  • UL 1573-rated for indoor use
  • 50,000-hour LED life
  • Power pass through and DMX in/thru connections for easy setup
  • User-friendly control interface with multiple modes and fixture settings
  • Easy-access slots for secondary lenses and standard 7.5"PAR accessories
  • Primary field angle of 17°
  • Round and oblong beam-diffusers available
  • DMX512 in and thru via 5-pin XLR connectors
  • No-noise, fan-free convection-cooling for acoustically sensitive installations

ETC SELD40VI-0A-B Specifications:

GENERAL

  • 40 LED color mixing wash fixture
  • ETL listed to UL1573 – the standard for stage and studio lighting units
  • IP20-rated for indoor use
  • Power and DMX in/thru connections for easy setup
  • User-friendly control interface with multiple modes and fixture settings

PHYSICAL

  • Rugged die-cast all-metal housing
  • Easy access slots for secondary lenses and standard 7.5”

PAR accessories

  • Available in black (standard), white or silver (optional) or custom colors (contact factory)
  • Hanging yoke standard. Optional yoke/floor stand available

ELECTRICAL

  • 100VAC to 240VAC 50/60 Hz universal power input
  • Neutrik power in and thru connections
  • Up to 10 fixtures may be linked via power in/thru connector per 15Acircuit
  • Requires power from a non-dim source

LED*

  • 50,000 hour LED life (50,000 hours to 70% intensity)
  • 40 Luxeon® Rebel LED emitters

*All LED sources experience some lessening of light output and some color shift over time. LED output will vary with thermal conditions. Based on the LED manufacturer’s B50 L70 specification, a Selador luminaire will achieve ~70% of its initial output after 50,000 hours of typical usage. In individual situations, LEDs will be used for different durations and at different levels. This can eventually lead to minor alterations in color performance, necessitating slight adjustment to presets, cues or programs.

COLOR

  • Exclusive x7 Color System™ seven-color LED array
  • Beautifully illuminates skin tones and other objects for natural appearance and high color rendering
  • Broad-spectrum color interacts seamlessly with conventional sources
  • Exclusive optional red-shift option emulates tungsten dimming performance

OPTICAL

  • Primary field angle of 17° and beam angle of 8°
  • Secondary lenses available for multiple beam spread options
  • Each fixture ships with a 25° lens; additional lenses must be ordered separately

CONTROL

  • DMX512 in and thru via five-pin XLR connectors
  • Multiple control options including RGB, strobe, and console-free Master/Slave mode
  • 15-bit virtual dimming engine provides smooth, high quality theatrical fades and minimizes color shift during dimming
  • RDM functionality for address and setting changes

THERMAL

  • Ambient operating temperature of -4° to 104°F (-20° to 40°C)
  • Active electronic thermal management for droop-free operation
  • Noiseless, fan-free convection cooling for acoustically sensitive installations
  • Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing

PHYSICAL

  • Weight* 14 lbs / 6.4 kgs
  • Shipping Weight  17 lbs / 7.8 kgs

*Does not include mounting hardware.

ETC/Elec Theatre Controls 400BD Barn Door

ETC/Elec Theatre Controls 400BD Barn Door

Barn Door for Source Four Fresnel, Source Four PAR and Source Four PARNel fixtures.
Log In For Price
In Stock
ETC/Elec Theatre Controls SELRVN-7.5 7.5" Very Narrow Lens (Round Field) for D40 Fixture

ETC/Elec Theatre Controls SELRVN-7.5 7.5" Very Narrow Lens (Round Field) for D40 Fixture

ETC's SELRVN-7.5 is a very narrow round diffuser lens in a black frame that is cut for D40™ fixtures and creates a round field pattern. NOTE: This lens is NOT sized for use in Selador® Classic (Vivid™, Lustr®, ...
Log In For Price
In Stock
ETC/Elec Theatre Controls SELRN-7.5 7.5" Narrow Lens (Round Field) for D40 Fixture

ETC/Elec Theatre Controls SELRN-7.5 7.5" Narrow Lens (Round Field) for D40 Fixture

ETC's SELRN-7.5 is a narrow round diffuser lens in a black frame that is cut for D40™ fixtures and creates a round field pattern. NOTE: This lens is NOT sized for use in Selador® Classic (Vivid™, Lustr®, ...
Log In For Price
In Stock
ETC/Elec Theatre Controls SELRW-7.5 7.5" Wide Lens (Round Field) for D40 Fixture

ETC/Elec Theatre Controls SELRW-7.5 7.5" Wide Lens (Round Field) for D40 Fixture

ETC's SELRW-7.5 is a wide round diffuser lens in a black frame that is cut for D40™ fixtures and creates a round field pattern. NOTE: This lens is not sized for use in Selador® Classic (Vivid™, Lustr®, Paletta™, ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls SELRM-7.5 7.5" Medium Lens (Round Field) for D40 Fixture

ETC/Elec Theatre Controls SELRM-7.5 7.5" Medium Lens (Round Field) for D40 Fixture

ETC's SELRM-7.5 is a medium round diffuser lens in a black frame that is cut for D40™ fixtures and creates a round field pattern. NOTE: This lens is NOT sized for use in Selador® Classic (Vivid™, Lustr®, ...
Log In For Price
In Stock
ETC/Elec Theatre Controls SELOM-7.5 7.5" Medium Lens (Oblong Field) for D40 Fixture

ETC/Elec Theatre Controls SELOM-7.5 7.5" Medium Lens (Oblong Field) for D40 Fixture

ETC's SELOM-7.5 is a medium oval diffuser lens in a black frame that is cut for D40™ fixtures and creates a oblong field pattern. NOTE: This lens is NOT sized for use in Selador® Classic (Vivid™, Lustr®, Paletta™, etc.) ...
Log In For Price
In Stock
ETC/Elec Theatre Controls SELOW-7.5 7.5" Wide Lens (Oblong Field) for D40 Fixture

ETC/Elec Theatre Controls SELOW-7.5 7.5" Wide Lens (Oblong Field) for D40 Fixture

ETC's SELOW-7.5 is a wide oval diffuser lens in a black frame that is cut for D40™ fixtures and creates a oblong field pattern. NOTE: This lens is not sized for use in Selador® Classic (Vivid™, Lustr®, Paletta™, etc.) ...
Log In For Price
In Stock
ETC/Elec Theatre Controls 400CC C-Clamp for ETC Fixtures, Black

ETC/Elec Theatre Controls 400CC C-Clamp for ETC Fixtures, Black

This C-Clamp from ETC is useful for mounting and locking lighting fixtures to a grid pipe and includes an M12 thread screw for the fixture yoke.
Log In For Price
In Stock
ETC/Elec Theatre Controls 400SC 30" Source Four Safety Cable in Black

ETC/Elec Theatre Controls 400SC 30" Source Four Safety Cable in Black

This black safety is 30" in length and is a useful Source Four fixture accessory.Specifications: Cable is a 30" long, 1/8" diameter black wire rope cable with snap clamp fitted. The safety ratio of the cable is 5:1 The breaking load ...
Log In For Price
In Stock
ETC/Elec Theatre Controls 407CF Gel Frame for Source Four PAR

ETC/Elec Theatre Controls 407CF Gel Frame for Source Four PAR

This Source Four PAR accessory is a Color Frame that comes with a black finish.
Log In For Price
In Stock
ETC/Elec Theatre Controls DPSJ-25 ETC Power Thru Jumper, 25Ft

ETC/Elec Theatre Controls DPSJ-25 ETC Power Thru Jumper, 25Ft

This is 25' Power thru Jumper from ETC that is an Edison input power cable with inline switch.Note: Power thru jumpers connect to fixture’s output (thru) connector to provide link to successive fixtures.
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC/Elec Theatre Controls DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC's DPJ-10 is a 10 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls DPJ-5  5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC/Elec Theatre Controls DPJ-5 5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper

ETC's DPJ-5 is a 5 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls DPA-B Desire D60 Power Input Cable, Stage Pin

ETC/Elec Theatre Controls DPA-B Desire D60 Power Input Cable, Stage Pin

This is an optional accessory when ordering the Desire D60 Studio LED Luminaire from ETC. It's a Power Input Cable that is a 5’ PowerCon to 20A two pin and ground (stage pin) connector (this is a replacement only).
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls SELD40FSY Yoke with Floor Stand Combo for Desire D40 in Black

ETC/Elec Theatre Controls SELD40FSY Yoke with Floor Stand Combo for Desire D40 in Black

NOTE: Product shown in image is for illustrative purposes only. Actual product may vary in appearance. This is a fixture accesory to be used with Desire D40 LED Luminaires fixtures. It's a D40 Yoke with Floor Stand Combo unit. This handy ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls SELON-7.5 7.5" Narrow Lens (Oblong Field) for D40 Fixture

ETC/Elec Theatre Controls SELON-7.5 7.5" Narrow Lens (Oblong Field) for D40 Fixture

ETC's SELON-7.5 is a narrow oval diffuser lens in a black frame that is cut for D40™ fixtures and creates a oblong field pattern. NOTE: This lens is not sized for use in Selador® Classic (Vivid™, Lustr®, Paletta™, etc.) ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls SELLVN-7.5 7.5" Very Narrow Linear Lens for D40 Fixture

ETC/Elec Theatre Controls SELLVN-7.5 7.5" Very Narrow Linear Lens for D40 Fixture

ETC's SELLN-7.5 is a very narrow linear diffuser lens that is cut for D40™ fixtures and creates a narrow linear field pattern. Linear lenses may be combined to create desired field size. This narrow linear field lens is made of the ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls SELLN-7.5 7.5" Narrow Linear Lens for D40 Fixture

ETC/Elec Theatre Controls SELLN-7.5 7.5" Narrow Linear Lens for D40 Fixture

ETC's SELLN-7.5 is a narrow linear diffuser lens that is cut for D40™ fixtures and creates a narrow linear field pattern. Linear lenses may be combined to create desired field size. This narrow linear field lens is made of the same ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls 400PTH3 Top Hat for Source Four PAR, 3" Tube, Black

ETC/Elec Theatre Controls 400PTH3 Top Hat for Source Four PAR, 3" Tube, Black

This Source Four PAR accessory is a Top Hat 3" tube that is black in color and is intended to reduce light flare.
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls SELLW-7.5 7.5" Wide Linear Lens for D40 Fixture

ETC/Elec Theatre Controls SELLW-7.5 7.5" Wide Linear Lens for D40 Fixture

ETC's SELLW-7.5 is a wide linear diffuser lens that is cut for D40™ fixtures and creates a narrow linear field pattern. Linear lenses may be combined to create desired field size. This narrow linear field lens is made of the same ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls 400PTH6 Top Hat for Source Four PAR, 6" Tube, Black

ETC/Elec Theatre Controls 400PTH6 Top Hat for Source Four PAR, 6" Tube, Black

This Source Four PAR accessory is a black Top Hat with a 6" tube that is used to reduce light flare.
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls 400PHH Source Four Par Half Hat, Black

ETC/Elec Theatre Controls 400PHH Source Four Par Half Hat, Black

This Source Four accessory is a Source Four PAR Half Hat that is black in color. Like ETC's Top Hat, this item reduces and controls flare, but from one side only.
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls SELLM-7.5 7.5" Medium Linear Lens for D40 Fixture

ETC/Elec Theatre Controls SELLM-7.5 7.5" Medium Linear Lens for D40 Fixture

ETC's SELLM-7.5 is a medium linear diffuser lens that is cut for D40™ fixtures and creates a narrow linear field pattern. Linear lenses may be combined to create desired field size. This narrow linear field lens is made of the same ...
Log In For Price
Usually ships in 7-14 business days.
ETC/Elec Theatre Controls SELLEW-7.5 7.5" Extra Wide Linear Lens for D40 Fixture

ETC/Elec Theatre Controls SELLEW-7.5 7.5" Extra Wide Linear Lens for D40 Fixture

ETC's SELLEW-7.5 is a extra wide linear diffuser lens that is cut for D40™ fixtures and creates a narrow linear field pattern. Linear lenses may be combined to create desired field size. This narrow linear field lens is made of the same ...
Log In For Price
Usually ships in 7-14 business days.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM