RDL EZ-VMD4
1x4 Video Distribution Amp VGA/XGA

OUR PART #  EZ-VMD4


The EZ-VMD4 is a high-resolution computer video distribution amplifier with four outputs. The input has an associated ID BIT switch to assure compatibility with various computers. Sync is front-panel switch-selectable between standard TTL or 75 O video.

One of the four outputs is indivually buffered for driving the computer monitor. The other three outputs are driven by separate output amplifiers. All outputs provide flat, wideband response. All switched functions are easily accessible on the front panel.

The EZ-VMD4 is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms, stores and commercial A/V systems. Power supply included.

Features:

  • Input and Outputs on HD15 Female Connectors
  • One Local Monitor Plus Three Monitor Outputs
  • Wide RGB Bandwidth > 400 MHz Loaded
  • High Resolution Compatibility VGA through QXGA
  • Reliable Full-Size Switches for Switched Functions
  • Switch-Selectable TTL or Video 75 O Input Sync
  • NORM ID BIT Connects LOCAL MONITOR and INPUT ID
  • Front-Panel Input ID Bit Selection
  • DC RGB Coupling, Output Polarity and Offset Follow Input

Specifications:

  • Input: VGA - QXGA RGBHV or RGB with combined sync
  • Outputs (4): LOCAL MONITOR (1, Buffered, ID bit pass-thru to INPUT), OUTPUTS (3, buffered separately from LOCAL MONITOR)
  • Gain: Unity
  • Video bandwidth: > 400 MHz
  • Video impedance: 75 O (Input and output)
  • Sync (HV) input: 500 O TTL or 75 O Video (Switch-selectable), 0.7 V to 5 V p-p
  • Sync (HV) output: 5V TTL
  • Sync (HV) Propogation delay: < 4 nS typ.
  • Sync (HV) Rise time: < 4 nS typ.
  • Sync (combined): Output follows input
  • Bit Control: Switch-selectable (Pin 4, over-rides LOCAL MONITOR jack ID bit pass-thru)
  • 24 Vdc power supply current: 70 mA (idle), 90 mA (max.)  Power supply included.
  • Power supply input voltage: 100 to 240 VAC
  • Warranty: 3 Years; contact RDL technical support department for assistance
  • Case dimensions: 5.75” (14.6 cm)W x 5” (12.7 cm)D
  • Mounting size: 1/3 rack width

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

RDL EZ-SMB2  Surface Mount Bezel 1/3 Rack

RDL EZ-SMB2 Surface Mount Bezel 1/3 Rack

Surface mount bezel for 1/3 rack width EZ products.
Log In For Price
In Stock
RDL PS24AS PS-24AS

RDL PS24AS PS-24AS

Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products.Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, ...
Log In For Price
In Stock
RDL EZ-UCB2 Under Counter Bracket

RDL EZ-UCB2 Under Counter Bracket

The Radio Design Labs EZ-UCB2 is a under counter bracket pair for all EZ product widths.Radio Design Labs EZ-UCB2 Features: Brackets Snap on EZ Case for Easy AlignmentEZ Product Secures Quickly Using Two ScrewsBrackets Fasten to Underside ...
Log In For Price
In Stock
RDL EZ-CC6  Component Chasis, 6 x 1/6 RU

RDL EZ-CC6 Component Chasis, 6 x 1/6 RU

Component Chassis for 6 Increments of 1/6 Rack WidthFeatures: Mounts All EZ A/V Products Mounts EZ Storage Drawers Cover Lifts Off for Easy Product Mounting Integral Heavy-Duty Non-Skid Rubber Feet
Log In For Price
Available to Order! Item usually SHIPS in 6-10 business days
RDL EZ-RA6  Rack Adapter

RDL EZ-RA6 Rack Adapter

Rack Adapter for 6 Increments of 1/6 Rack Width Mounts All EZ A/V Products Mounts EZ Storage Drawers Base Plate Slides Out for Easy Product Mounting Occupies One RU in Standard 19¨ Rack
Log In For Price
Available to Order! Item usually SHIPS in 4 business days
RDL EZ-DC2 Desktop Chassis 1/3 Rack

RDL EZ-DC2 Desktop Chassis 1/3 Rack

Desktop Chassis for 1/3 Rack Width EZ Products Mounts 1/3 Width EZ Product to Desktop Installs Quickly With Two Screws Covers Cable Port in Desktop Provides Space for Excess Wire
Log In For Price
Available to Order! Item usually SHIPS in 6-10 business days
RDL EZ-SD1  1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6

RDL EZ-SD1 1/6 Rack Width Storage Drawer for EZ-RA6 or EZ-CC6

RDL's EZ-SD1 is a 1/6 rack width storage drawer designed to mount in RDL's EZ-CC6 or EZ-RA6 rack adapters. The drawer holds adapters and cables and can be used in place of filler panels.
Log In For Price
Available to Order! Item usually SHIPS in 6-10 business days
RDL EZ-FP1  Filler Panel, 1/6RU

RDL EZ-FP1 Filler Panel, 1/6RU

Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6.
Log In For Price
Available to Order! Item usually SHIPS in 6-10 business days

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM