Radio Design Labs D-CIJ3D
Consumer Input Jacks, Stereo, RCA

OUR PART #  D-CIJ3D


The D-CIJ3D is designed for installations requiring stereo unbalanced line level audio sources to feed stereo balanced (or unbalanced) audio lines.

The D-CIJ3D is a complete unbalanced line-level audio input module. The front panel features two gold plated phono jacks and a single stereo mini-jack, intended for mono or stereo consumer level sources. An input signal may be connected to either the phono jacks or to the mini-jack. The inputs are balanced through audio transformers configured to reject induced hum. A stereo line-level output is provided on the rear-panel detachable terminal block for connection to 10 k ohms or higher input impedance line-level module or equipment inputs.

Specifications:

  • Input connectors (3): Phono jacks with gold contacts(Left and Right), Mini-jack 3.5 mm (Stereo)
  • Frequency response (line level): 50 Hz to 20 kHz (±1dB); 30 Hz to 20 kHz (±2 dB)
  • THD: <0.2% (1 kHz)
  • Output connector: Detachable terminal block
  • Dimensions:
    Height: 4.13 in. 10.49 cm
    Width: 1.7 in. 4.32cm
    Depth: 2.15 in. 5.47 cm
  • Mounting Box Minimum Dimensions:
    Width: 1.80 in. 4.57 cm
    Depth: 1.75in. 4.45 cm
  • Crosstalk: <-80 dB (1 kHz); <-60 dB (10 Hz to 20kHz)
  • Ambient Operating Environment: 0° C to 55° C

 

Radio Design Labs DC-4G  Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)

Radio Design Labs DC-4G Desktop or Wall-Mounting Decora Remote Control or Panel Chassis (Gray)

Radio Design Labs' DC-4G desktop chassis holds four Decora®-style products, including RDL remote controls and connector plates.  Installation is facilitated using the included mounting plate, which allows the chassis to mount to ...
Log In For Price
In Stock
Radio Design Labs WB-1U Single-Gang Universal Wall Box

Radio Design Labs WB-1U Single-Gang Universal Wall Box

Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
Log In For Price
In Stock
Radio Design Labs CP1-W Wall Plate, Single Cover Plate, White

Radio Design Labs CP1-W Wall Plate, Single Cover Plate, White

For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-1U Universal Wall Box.
Log In For Price
In Stock
Radio Design Labs RM-D9 3RU Rack Panel Mount for 9 Decora Models

Radio Design Labs RM-D9 3RU Rack Panel Mount for 9 Decora Models

Radio Design Labs' RM-D9 is a 3 RU rack panel that allows the mounting of 9 Decora products, such as RDL remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens.The ...
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs DC-2G  Wall Mount Chasis for Decora

Radio Design Labs DC-2G Wall Mount Chasis for Decora

The DC-2G desktop chassis holds two Decora®-style products, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a ...
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs RM-D3 1RU Rack Panel Mount for 3 Decora Models

Radio Design Labs RM-D3 1RU Rack Panel Mount for 3 Decora Models

Radio Design Labs' RM-D3 is a 1 RU rack panel that allows the mounting of 3 Decora products, such as RDL® remote controls and D-Series connector plates. The installer can label each installed module behind an included protection lens. The ...
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs DC-1G  Wall Mount Chasis for Decora

Radio Design Labs DC-1G Wall Mount Chasis for Decora

The DC-1G desktop chassis holds one Decora®-style product, including RDL remote controls and connector plates. Installation is facilitated using the included mounting plate, which allows the chassis to mount to a tabletop or on a vertical ...
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs WB-2U Dual-Gang Universal Wall Box

Radio Design Labs WB-2U Dual-Gang Universal Wall Box

Can be mounted in International or US walls and cabinets. Features side and rear mounting holes which secure the box in new construction. Also has folding tabs which secure the box in an existing wall or cabinet.Dimensions: Height: 4.125 ...
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs CP-2/G Double Cover Plate/Gray

Radio Design Labs CP-2/G Double Cover Plate/Gray

For use with RDL R style remote controls and D style connector plates; Mount with RDL WB-2U Universal Wall Box. 
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs CP-1S Single Gang Decora Cover Plate in Stainless Steel

Radio Design Labs CP-1S Single Gang Decora Cover Plate in Stainless Steel

The Radio Design Labs CP-1S is a single gang decora cover plate in stainless steel.Dimensions: 4.55" H x 2.8" W (11.6 x 7.1 cm)Package Dimensions: 2" x 3"Shipping Weight: 0.072 lbs
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs CP-1/G Single-Gang Gray Wall Plate for SMB-1, DC-1, WB-1U, Decora-Style Products

Radio Design Labs CP-1/G Single-Gang Gray Wall Plate for SMB-1, DC-1, WB-1U, Decora-Style Products

Radio Design Labs' CP-1G is for use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels.  Compatible with Decora style products and American electrical boxes.Height: 4.55" (11.6 cm)Width: 2.80" (7.1 cm)
Log In For Price
Usually ships in 7-14 business days.

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM