Millennia Media Inc AD-D96
Digital Output Converter Option (for HV3D & HV3R)


Static electricity can harm delicate components on the AD-D96 board.  To prevent static damage, discharge static electricity from your body before you touch any electronic components.  You can do so by touching an unpainted metal surface on the HV-3D's chassis.
(Unplug the HV-3D's AC power cord before removing the top cover and changing settings on the AD-D96 board.)

The AD-D96 should have only one clock source.  If running with the internal clock, make sure SW2 is in the INT position and no external clock is connected.

Sync Signals on the BNC connectors should conform to the AES-3id specification.  AES-3, through an XLR-to-BNC transformer (Neutrik NADITBNC-F or equivalent) will work fine.  S/PDIF works, but is not specified.


  • Eight channels of A/D Conversion
  • 24-bit 96 kHz eight-channel AES format converter
  • Internal/External Clocking with AES or Wordclock in/out on BNC connecters
  • DB25 Connector that conforms to the Tascam wiring standard
  • -18dBFS reference level
  • All HV-3D/HV-3R units can have the option installed


  • Dynamic Range:
    - Mic preamp plus A/D Converter: > 110dB
  • Total Harmonic Distortion + Noise:
    - Mic preamp plus A/D Converter: < .001%,
  • Frequency Response:
    - 44.1 kHz: -0.5 dB @ 4Hz and 21.5kHz
    - 48 kHz: -0.5 dB @ 4Hz and 23.4kHz
    - 88.2 kHz: -0.5 dB @ 4hZ and 42.0kHz
    - 96 kHz: -0.5 dB @ 4Hz and 46.8kHz
  • Full Scale Output Level: +22 dBu
  • Common Mode Rejection Ratio: Better than analog stage
  • IMD SMPTE 4:1 60 Hz, 7kHz: <.003%
  • Interchannel Crosstalk:
    - 20 kHz @ 45 dB gain and Full Scale Output: -88 dB
  • Maximum Non-harmonic Spurious Tones: Better than -140 dB
  • Intrinsic Jitter:
    - 20Hz-20kHz @ 48kHz: 50 pS RMS typical
  • Latency:
    - 12/Fs for single speed: 0.25ms at 48kHz
    - 9/Fs for double speed: 0.09ms at 96kHz
  • External Clock Lock Range: 32-96 kHz

Click to download

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM