Audix DP7-AUDIX
Drum / Percussion Microphone Pack

OUR PART #  DP7-AUDIX


The Audix DP7 drum pack is the ideal collection of 7 microphones for use with a standard 5-piece drum kit, whether it's onstage or in the studio. The 4 included VLMTM dynamic mics keep the drum transients at close range manageable, while the condensers accurately capture the cymbals as well as the stereo image of the entire kit from overhead. All together, this is an award-winning combination of mics, clips, and mounting accessories that comes packaged securely within a convenient, rugged aluminum carrying case.

Applications

- All-in-one solution for miking drums
- Instrument-specific mics for optimal results
- Rugged Audix quality
- Great for stage and studio
- Dflex clips for easy positioning
- Road case

Audix DP7 Includes:

  • 1 x i5 Snare Mic
  • 2 x D2 Rack Tom Mics
  • 1 x D4 Floor Tom Mic
  • 1 x D6 Kick Drum Mic
  • 2 x ADX51 Overhead Mics
  • 4 x DVICE Rim Mounts
  • 3 x DCLIP Mic Clips
  • 1 x MC1 Mic Clip
  • 2 x WS81C Windscreens
  • Aluminum Road Case
  • " How to Mic Your Drums" DVD

Audix DP7 Features:

  • i5 Snare Mic
    The i5's cardioid polar pattern allows it to focus its pickup on the particular instrument that is being miked, without picking up other instruments or ambient noise on stage. It features a smooth, uniform frequency response of 50 Hz - 16 kHz, along with an ability to handle sound pressure levels (SPL) in excess of 140 dB, so you can use the i5 for a wide variety of applications and for all genres of music.
  • D2 Tom Mic
    Wherever audio punch and warmth are required within the mix, this mic makes an excellent choice for instruments, including toms, congas, and kick drums. The D2's natural warmth also makes it a great mic for saxophones and other woodwinds requiring a true, sensitive, yet large, reproduction. Dynamic hypercardioid drum and instrument microphone has warm contoured response for added bottom and punch. It's also ideal for drums, instruments, and brass. Features VLM noise rejection capsule, compact design for easy placement and is milled from a solid block of aluminum for reduced weight and greater durability.
  • D4 Kick/Floor Tom Mic
    D4 applications include kick drum, timpani, toms, piano, sax, and any other instrument that requires precise low frequency reproduction. It utilizes an entirely new capsule specially designed to capture high SPL instruments with extended frequencies below 100Hz. By employing a sub-impulse technology that samples sounds at a rate higher than other mics, the D4 captures a truer image of the original sound than previous generations of kick drum mics. It's flat down to 63 Hz, and features a slight bump in response at 80 Hz, and has a gentle roll off below 40 Hz. From 80 Hz on up to 1 kHz, the D4's response is extremely linear.
  • D6 Dynamic Instrument Mic
    Audix's flagship kick drum mic, it's excellent when used for stage, studio and broadcast applications. The D6 is designed with a cardioid pickup pattern for isolation and feedback control. it's equipped with a VLM™ diaphragm for natural and accurate sound reproduction. It's lightweight, compact, and easy to position, and is a terrific choice for miking instruments that require extended low frequency reproduction such as kick drums, large toms, and bass cabinets. The D6's transformerless design, low impedance, and balanced output deliver interference-free performance.
  • ADX51 Condenser Mic
    A pre-polarized condenser microphone designed to handle a wide variety of live, studio and broadcast applications, The ADX51 is characterized by a cardioid pickup pattern and a smooth and uniform response over a frequency range of 40 Hz - 18 kHz. It's precision machined from solid brass with a low reflective black e-coat finish. Its low-noise electronic circuitry, low impedance, and balanced output enable interference-free performance, even over long cable runs. The ADX51 is road-worthy and capable of reproducing high sound pressure levels of 132 dB.

Audix DP7 Specifications:

i5

  • Transducer: Dynamic VLM Type B
  • Polar Pickup Pattern: Cardioid
  • Frequency Response: 50 Hz - 16 kHz
  • Output Impedance: 150 ohms balanced
  • mV/Pascal Sensitivity: 1.9mV
  • Rejection Off-Axis: >23 dB
  • Materials/Finish: Zinc Alloy/Black Finish
  • Max SPL: 140 dB
  • Weight: 8.8 oz. (250 g)
  • Length: 5.6" (141.5mm)

D2

  • Transducer: Dynamic VLM Type B
  • Polar Pickup Pattern: True Hypercardioid
  • Frequency Response: 44 Hz - 18 kHz
  • Output Impedance: 250 ohms
  • mV/Pascal Sensitivity: 2.5mV
  • Off-Axis Rejection: >30 dB
  • Power requrements: None 
  • Materials/Finish: Black Hard Coat
  • Max SPL: 144 dB
  • Weight: 8.8 oz. (250 g)
  • Length: 3.9" (100mm)

D4

  • Transducer: Dynamic VLM Type D
  • Polar Pickup Pattern: Broad Hypercardioid
  • Frequency Response: 38 Hz - 19 kHz
  • Output Impedance: 200 ohms
  • mV/Pascal Sensitivity: 2.1 mV
  • Off-Axis Rejection: >30 dB
  • Power requrements: None 
  • Materials/Finish: Black Hard Coat
  • Max SPL: 144 dB
  • Weight: 4.5 oz. (128 g)
  • Length: 3.9" (100mm)

D6

  • Transducer: Dynamic VLM Type B
  • Frequency Response: 30 Hz - 15 kHz
  • Polar Pickup Pattern: Cardioid
  • Output Impedance: 280 ohms
  • Sensitivity: 0.8 mV / Pa @ 1k
  • Max SPL: =144 dB
  • Off-axis rejection: >20 dB
  • Power requrements: None
  • Materials/Finish: Black Hard Coat
  • Weight: 8.9 oz. (254 g)
  • Length: 4.6" (117mm)

ADX51

  • Transducer: Pre-Polarized Condenser
  • Polar Pickup Pattern: Cardioid
  • Frequency Response: 40 Hz - 18 kHz
  • Output Impedance: 100 ohms balanced
  • mV/Pascal Sensitivity: 15.9 mV
  • Rejection Off-Axis: >20 dB
  • Materials/Finish: Brass/Black Finish
  • Max SPL: 132 dB
  • Weight: 6.5 oz. (184 g)
  • Length: 6.3" (160mm)

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM