Turbosound RC-1213
Recone Kit for Turbosound LS-213 Driver

OUR PART #  RC-1213


Recone kit for LS-1213 woofer used in these Turbosound models:

  • TCS-12M
  • TCS-56
  • TCS-59

TCS-12M

  The TCS-12M is a passive two-way vented wedge monitor designed for use in a variety of speech and music floor monitoring applications. 

   It consists of a 12" low frequency driver and  a 1" high frequency driver on a 90° x 40° horn, matched with a third order internal passive crossover network.

  The TCS-12M enclosure has been designed with the high frequency horn mounted vertically in line with the LF driver. This produces a coherent dispersion pattern with minimum phase cancellation within the coverage pattern of the monitor. It is ideally suited for use as a church choir or theatre vocal monitor, or in other critical applications requiring accurate reproduction of voice and music. The HF horn pattern of 90° x 40° is wide enough to allow the artist horn, matched with a third order internal passive crossover network.

  The TCS-12M enclosure has been designed with the high frequency horn mounted vertically in line with the LF driver. This produces a coherent dispersion pattern with minimum phase cancellation within the coverage pattern of the monitor. It is ideally suited for use as a church choir or theatre vocal monitor, or in other critical applications requiring accurate reproduction of voice and music. The HF horn pattern of 90° x 40° is wide enough to allow the artist considerable lateral freedom of movement on stage without loss of information.

  The TCS-12M enclosure provides an optimum monitoring angle of 42°, and is constructed from 5/8” (15mm) birch plywood, finished in black semi-matt textured paint (other colours optionally available). Two flush handles are provided on the sides for lifting and carrying. A black powder coated perforated steel mesh grille is fitted to protect the drive units from damage. 

  Connection to the enclosure is via two parallel-wired Speakon NL4MP connectors.  These are wired in parallel to allow loop-out considerable lateral freedom of movement on stage without loss of information.

TCS-56

    The TCS-56 is a passive full range two-way loudspeaker enclosure designed for use in primary speech and music sound reinforcement applications.

  The loudspeaker complement consists of a custom front loaded 12” low frequency driver and a 1” high frequency compression driver on a 60° x 40° constant directivity horn, matched with an internal passive crossover network.

  The large format constant directivity horn exhibits excellent pattern control down to crossover frequency, making the TCS-56 ideal for use in arrays.  The high frequency horn is designed to be removed and rotated through 90°, to suit applications requiring a 60° x 40° dispersion in a horizontal box format.

    The trapezoidal enclosure is constructed from 5/8” (15mm) birch plywood, and incorporates M10 threaded internal steel rigging brackets which are designed to accept standard eyebolts and optional Turbosound mounting hardware, providing a simple and convenient method of flying the cabinet.

  A rear panel connector plate carries a single  Neutrik Speakon NL4MP and a 4-way terminal strip for loop in and loop out connections to additional enclosures.

Recommended complementary products:

TCS-40 downfill enclosure

TCS-108, TCS-215, TCS-118 subwoofer enclosures

LMS-D6, LMS-D4 loudspeaker management systems   

TCS-59

  The TCS-59 is a passive full range two-way loudspeaker enclosure designed for use in primary speech and music sound reinforcement applications.

 The loudspeaker complement consists of a custom front loaded 12” low frequency driver and a 1” high frequency compression driver on a 90° x 60° constant directivity horn, matched with an internal passive crossover network.

  The large format constant directivity horn exhibits excellent pattern control down to crossover frequency, making the TCS-59 ideal for use in arrays. 

  The trapezoidal enclosure is constructed from 5/8” (15mm) birch plywood, and incorporates M10 threaded internal steel rigging brackets which are designed to accept standard eyebolts and optional Turbosound mounting hardware, providing a simple and convenient method of flying the cabinet.

  A rear panel connector plate carries a single Neutrik Speakon NL4MP and a 4-way terminal strip for loop in and loop out connections to additional enclosures.

Recommended complementary products:

TCS-40 downfill enclosure

TCS-108, TCS-215, TCS-118 subwoofer enclosures

LMS-D6, LMS-D4 loudspeaker management systems

 

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM