JBL CONTROL-25AV
Control 25AV 150W 5.25" Shielded Loudspeaker

OUR PART #  CONTROL-25AV


The JBL Control® 25AV utilizes a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact 2-way loudspeaker.

JBL Control 25AV Includes:

  • 1 Pr MTC-PC input panel cover
  • InvisiBall mounting base
  • 6 mm x 100 mm InvisiBall hex wrench

JBL Control 25AV Features:

  • Video shielded for use near video monitors
  • Extremely smooth frequency response
  • Stainless steel grill for harsh environments
  • 60 W transformer for 70 V or 100 V lines, with 8 ohms thru
  • SonicGuard™ overload protection
  • 5.25" (130 mm) polypropylene coated woofer, 0.75" (10 mm) titaniumcoated horn-loaded tweeter
  • Includes InvisiBall® mounting hardware and sealed input panel cover
  • Screw-down input terminals
  • 100° x 100° high frequency horn

JBL Control 25AV Specifications:

  • Frequency Range: 70 Hz - 23 kHz (-10 dB)
  • Power Capacity: 200 W Continuous Program Power; 100 W Continuous PinkNoise
  • Nominal Sensitivity: 87 dB SPL, 1 W @ 1 m (3.3 ft)
  • Midrange (+/-1.5 dB, typical): 130 Hz - 14 kHz
  • Nominal Coverage: 100° x 100°
  • Maximum SPL @ 1m: 113 dB continuous peak pink noise107 dB continuousaverage pink noise 103 dB continuous average music or speech
  • Directivity Factor (Q): 4.9 dB, averaged 500 Hz to 4kHz
  • Directivity Index (DI): 6.9 dB, averaged 500 Hz to 4kHz
  • Nominal Impedance: 8 ohms
  • Minimum Impedance: 6.7 ohms at 230 Hz
  • Crossover Network: Second Order Low Pass, Second Order High Pass, ComplexOptimization for Maximally Flat Response
  • Low Frequency: 5.25" (130 mm) polypropylene-coated paper withWeather Edge surround, 1" (25 mm) voicecoil on kapton former
  • High-Frequency: 0.75" (20 mm) titanium coated PEI
  • Enclosure Material: High Impact polystyrene
  • Grille: Painted stainless steel, black or white to match cabinet,paintable
  • Overload Protection: Full-range power limiting to protect network andtransducers. Internal fuse to protect during exceptional overload condition
  • Environmental: Exceeds Mil Spec 810 for humidity,salt spray, temperature& UV. IEC 529 IP-X4 splash proof rating
  • Terminations: Screw-down terminal strip, zinc-plated copper base, nickelplated metal screws/washers, accepts up to 9 mm outside 4 mm inside open lug(#6, #8 or #10), plus bare wire. (up to 12 AWG)
  • Safety Agency Rating: Transformer is listed per UL1876
  • Rotation: Against wall on InvisiBall Base: 37° vertical 44° horizontal Onbracket: 44° all directions
  • Dimensions (HxWxD): 9.3" x 7.4" x 6.3" (236 x 186 x 159 mm)

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM