Shure MX418/S
18" Gooseneck Condenser Microphone, Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen, Supercardioid

OUR PART #  MX418/S


The Microflex Gooseneck microphones bring a whole new meaning to the word flexible. Beyond their fully adjustable goosenecks lies a new level of flexibility the new Microflex interchangeable condenser microphone cartridge. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a broad variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the new Microflex product line for enhanced convenience and consistent sound. Every Microflex Gooseneck features high sensitivity and balanced, transformerless output for maximum immunity to electromagnetic hum and RF interference, even over long cable runs.

Shure MX418/S Includes:

  • Flange
  • Retainer
  • Isolation Ring
  • Snap-fit foam windscreen
  • Shock Mount
  • Hex Wrench #4

Shure MX418/S Features:

  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Balanced, transformerless output for increased immunity to noise over longcable runs
  • Shock mount that provides over 20 dB isolation from surface vibration noise
  • Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
  • Snap-fit foam windscreen

    Shure MX418/S Specifications:

    • Frequency Response: 50Hz - 17 kHz
    • Polar Pattern: Supercardioid
    • Output Impedance (at 1000 Hz): Rated at 150 ohms (180 ohms actual)
    • Open Circuit Sensitivity (at 1 kHz, ref. 1V/Pa): -33.5 dB (21.1 mV)
    • Maximum SPL (1 kHz at 1% THD, 1 kohm load): 122.7 dB
    • Equivalent Output Noise (A-weighted): 26.5 dB SPL
    • Signal to Noise Ratio (referenced at 94 dB SPL): 67.5 dB
    • Dynamic Range at 1 kohm Load: 96.2 dB
    • Common Mode Rejection: 45.0 dB minimum
    • Mute Switch Attenuation (switched models only): 50.0 dB minimum
    • Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V)
    • Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
    • Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
    • Environmental Requirements:
      • Operating Temperature Range: –18° C to 57° C (0° F to 135° F)
      • Relative Humidity: 0 to 95%
    Shure A412B Desktop Microphone Base Stand

    Shure A412B Desktop Microphone Base Stand

    The Shure A412B microphone base allows gooseneck microphones to be quickly mounted in situations where permanent installation is impractical.  The angled XLR input connector maintains a low profile, while inside the base there is ...
    Log In For Price
    In Stock
    Shure R183B Black Omnidirectional Replacement Cartridge

    Shure R183B Black Omnidirectional Replacement Cartridge

    Omnidirectional cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 and WL183 microphones.
    Log In For Price
    In Stock
    Shure R184B Supercardioid Cartridge, Black.

    Shure R184B Supercardioid Cartridge, Black.

    Supercardioid cartridge for WL183, WL184, WL185 and all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 Microphones. 
    Log In For Price
    In Stock
    Shure R185B Cardioid Cartridge, Black.

    Shure R185B Cardioid Cartridge, Black.

    Cardioid cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 microphones.
    Log In For Price
    In Stock
    Shure A400SM Shockmount systems

    Shure A400SM Shockmount systems

    Recessed shock mount for all Microflex® and Easyflex® gooseneck microphones.The A400SM Shock Mount employs Shure Shock-Stopper TM construction, which decouples the microphone from the mounting surface and reduces the transmission of ...
    Log In For Price
    In Stock
    Shure A412MWS Locking Metal Windscreen

    Shure A412MWS Locking Metal Windscreen

    The Shure A412MWS is a locking metal windscreen for Microflex gooseneck microphones.
    Log In For Price
    In Stock
    Shure RK412WS Snap-Fit Windscreen (4-pack)

    Shure RK412WS Snap-Fit Windscreen (4-pack)

    The Shure RK412WS is a 4-pack of Snap-fit windscreens for MX412 and MX418.
    Log In For Price
    In Stock
    Shure A57F Replacement Microphone Stand Adapter

    Shure A57F Replacement Microphone Stand Adapter

    Black Stand Adapter for SM63, SM63L, SM63LB, SM81, VP64A, VP64AL, AMS26 microphones and the WA380 Half Wave Antenna.
    Log In For Price
    In Stock
    Shure A99WS  Windscreen for SM99

    Shure A99WS Windscreen for SM99

    Large high performance foam windscreen for SM99 and MX400 Series gooseneck microphones.
    Log In For Price
    In Stock
    Add to Cart

    We're sorry, only of this item available



    Call a Sales Pro at for more information

    Serving Contractors, Dealers, and Installers Since 1977

    Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM