Shure MX418/C 18" Gooseneck Condenser Microphone
Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen, Cardioid

OUR PART #  MX418/C


The Shure MX418/C Microflex® Standard Gooseneck microphones bring a whole new meaning to the word flexible with their fully adjustable gooseneck. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.

Shure MX418/C Features:

  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Interchangeable cartridges provide the right polar pattern for every application
  • Balanced, transformerless output for increased immunity to noise over long cable runs
  • Shock mount that provides over 20 dB isolation from surface vibration noise
  • Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
  • Snap-fit foam windscreen

Shure MX418/C Specifications:

  • Frequency Response: 50 Hz - 17 kHz
  • Polar Pattern: Cardioid
  • Output Impedance (at 1000 Hz): Rated at 150 Ohms (180 Ohms actual)
  • Open Circuit Sensitivity (at 1 kHz, ref.1V/Pascal*):  
    • Cardioid: –35.0 dB (17.8 mV)
    • All settings –12 dB at 0 gain
      • *1 Pascal = 94 dB SPL
  • Maximum SPL (1 kHz at 1% THD, 1k Ohm load):
    • Cardioid: 124.2 dB
    • All settings +6 dB at 0 gain
  • Equivalent Output Noise (A-weighted): Cardioid: 28.0 dB SPL
  • Signal to Noise Ratio (referenced at 94 dB SPL) Cardioid: 66.0 dB
  • Dynamic Range at 1k Ohm Load: 96.2 dB; 100 dB at 0 gain
  • Common Mode Rejection: 45.0 dB minimum
  • Preamplifier Output Clipping Level (1%THD): 
    • –6.0 dBV (0.5 V)
    • –12 dB at 0 gain
  • Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector
  • Power Requirements: 11 to 52 VDC phantom, 2.0 mA
  • Operating Temperature Range: –18°C to 57°C (0°F to 135°F)
  • Relative Humidity: 0 to 95%
Shure A412B Desktop Microphone Base Stand

Shure A412B Desktop Microphone Base Stand

The Shure A412B microphone base allows gooseneck microphones to be quickly mounted in situations where permanent installation is impractical.  The angled XLR input connector maintains a low profile, while inside the base there is ...
Log In For Price
In Stock
Shure R183B Black Omnidirectional Replacement Cartridge

Shure R183B Black Omnidirectional Replacement Cartridge

Omnidirectional cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 and WL183 microphones.
Log In For Price
In Stock
Shure R184B Supercardioid Cartridge, Black.

Shure R184B Supercardioid Cartridge, Black.

Supercardioid cartridge for WL183, WL184, WL185 and all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 Microphones. 
Log In For Price
In Stock
Shure R185B Cardioid Cartridge, Black.

Shure R185B Cardioid Cartridge, Black.

Cardioid cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX412, MX418 microphones.
Log In For Price
In Stock
Shure A400SM Shockmount systems

Shure A400SM Shockmount systems

Recessed shock mount for all Microflex® and Easyflex® gooseneck microphones.The A400SM Shock Mount employs Shure Shock-Stopper TM construction, which decouples the microphone from the mounting surface and reduces the transmission of ...
Log In For Price
In Stock
Shure A412MWS Locking Metal Windscreen

Shure A412MWS Locking Metal Windscreen

The Shure A412MWS is a locking metal windscreen for Microflex gooseneck microphones.
Log In For Price
In Stock
Shure RK412WS Snap-Fit Windscreen (4-pack)

Shure RK412WS Snap-Fit Windscreen (4-pack)

The Shure RK412WS is a 4-pack of Snap-fit windscreens for MX412 and MX418.
Log In For Price
In Stock
Shure A57F Replacement Microphone Stand Adapter

Shure A57F Replacement Microphone Stand Adapter

Black Stand Adapter for SM63, SM63L, SM63LB, SM81, VP64A, VP64AL, AMS26 microphones and the WA380 Half Wave Antenna.
5.0 / 5 ★★★★★
Log In For Price
In Stock
Shure A99WS  Windscreen for SM99

Shure A99WS Windscreen for SM99

Large high performance foam windscreen for SM99 and MX400 Series gooseneck microphones.
Log In For Price
In Stock
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM