RDL TXAVX
TX-AVX

OUR PART #  TXAVX


Switches to auxiliary video input upon loss of primary video input. Detects and alarms on loss of video.

Radio Design Labs' TX-AVX is the ideal choice in installations where automatic switchover to an alternate video source is needed when the primary signal is lost. The unique power supply input allows the TX-AVX to be powered from a wide variety of existing AC or DC power sources.

NOTE: Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product.  Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

The TX-AVX has two video inputs and a single output. The detection circuit bridges the INPUT line. When a valid NTSC or PAL video signal is detected, the INPUT jack is connected to the OUTPUT jack. The output is designed to connect to a 75 ohm terminated load. In the absence of video input at the INPUT jack, the AUX INPUT jack is connected to the OUTPUT jack. The switching is accomplished by means of a high-quality RF relay. If power to the TX-AVX is interrupted, then the AUX INPUT jack is connected to the OUTPUT jack. The INPUT jack is 75 ohm terminated. The AUX INPUT is terminated when it is connected to the OUTPUT and is unterminated when it is not in use.

Video detection is based on valid sync signals. The TX-AVX responds to valid NTSC or PAL sync while ignoring 50 Hz and 60 Hz hum and related induction artifacts. The TX-AVX is able to detect signals as weak as 0.5 V p-p. When a valid signal is detected, the relay connects the INPUT to the OUTPUT, and provides a ground connection to the SLAVE terminal, permitting the module to be connected as a video-present detector. Use in conjunction with RDL® BZR Alert Modules for convenient and reliable notification of status change.

Features:

  • Automatic Switchover to a Secondary Video Source
  • Loss of Video Detection
  • Dry-Contact Relay Output
  • Detection of NTSC or PAL Signals
  • Operation from AC or DC Power

Typical Performance:

  • Inputs: BNC, Ground-referenced
  • Input Level: 0.5 V p-p video to 1 V p-p video
  • Output: BNC, Ground-referenced (Output must be terminated with 75 ohm load)
  • Slave Output: Switches to ground on valid input signal
  • Relay Contacts: Single-Pole/Single-Throw
  • Maximum Switching Power: 60 W (220 Vdc, 125 Vac, 2A)
  • Power Requirement: GROUND-REFERENCED, 12 to 33 Vdc or 12 to 24 Vac @ 100 mA
RDL TXRA5 TX-RA5

RDL TXRA5 TX-RA5

Radio Design Labs' TX-RA5 chassis is a single rack unit accessory which provides mounting for up to 5 TX Series products.
Log In For Price
In Stock
RDL PS24AS PS-24AS

RDL PS24AS PS-24AS

Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products.Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, ...
Log In For Price
In Stock
RDL MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

RDL MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module

Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.
Log In For Price
In Stock
RDL SR4 SR-4

RDL SR4 SR-4

Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...
Log In For Price
Usually ships in 6-10 business days.
RDL PM-1T Pole Mount Tray for RDL Module

RDL PM-1T Pole Mount Tray for RDL Module

The PM-1T is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller round or rectangular pole. The tray accommodates up to two FP-PA20 Audio Power Amplifiers (for stereo operation) and two ...
Log In For Price
Usually ships in 6-10 business days.
RDL TX-HRA3 RackMount 10.4" Rack Mount for 3 TX Series Products

RDL TX-HRA3 RackMount 10.4" Rack Mount for 3 TX Series Products

The TX-HRA3 rack mounts 3 TX modules. This adapter fits 10.4" racks.Radio Design Labs TX-HRA3 Rack Mount Specifications: Package Dimensions (LxWxD): 13" X 2.5" X 2.5" Shipping Weight: 0.55 lbs.
Log In For Price
Usually ships in 6-10 business days.
RDL DRA-35T Din Rail Adaptor for TX Module

RDL DRA-35T Din Rail Adaptor for TX Module

The DRA-35T provides mounting for any RDL® TX or MAX TX module to a DIN rail. The unique design allows mounting TX modules in a rack, cabinet or anywhere else DIN rail mounting of TX modules is desired.
Log In For Price
Usually ships in 6-10 business days.
RDL MB3-RDL Kit to Mount ST, TX Series Modules on FP Panel

RDL MB3-RDL Kit to Mount ST, TX Series Modules on FP Panel

TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track.
Log In For Price
Usually ships in 6-10 business days.
RDL MB2-RDL Mounting Kit for RU and TX Series

RDL MB2-RDL Mounting Kit for RU and TX Series

MB-2 pair mounts a RACK-UP or TX module above or below a surface.
Log In For Price
Usually ships in 6-10 business days.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM