Ashly MX206
Stereo Mixer


Designed to be used by itself or as a supplement to larger mixing consoles, the MX-206 from Ashly provides superior audio performance in a single rack-space package. Equally at home in either fixed or portable installations, the MX-206 may be used anywhere where additional microphone inputs are needed. Typical applications include live sound reinforcement, broadcast, recording, and film/video production.

The Ashly MX-206 is a rack-mountable six input channel stereo microphone mixer offering up to 84 dB of gain for distant mic placements or extremely low-level signals. Ultra low-noise, studio-grade integrated mic preamps are utilized. Each channel has a switchable 20 dB pad, a three-position sensitivity switch to handle microphones with different input sensitivities, and 48 V phantom power may be switched in for use by condenser mics. Every input has its own peak LED indicator. A separate Aux In volume control adjusts line level sources, such as a CD player or tape deck connected to rear-panel RCA inputs. Since plenty of headroom has been designed into the MX-206, even the loudest signals can be handled without distortion.

Output is monitored via two 5-segment, multi-colored LED meters, along with separate Peak Clip Indicators. The transformer-isolated XLR balanced mono output is capable of driving +24dBu into 600 ohms, and a separate TRS 1/4" output may be used either balanced or unbalanced. An Aux output appears on RCA jacks.

The MX-206 provides superior audio performance in a rugged and durable package. Backed by Ashly's exclusive Five Year Worry-Free Warranty, the MX-206 is designed to provide many years of trouble-free operation.


  • High-gain mic preamps with very low noise and distortion
  • 48 Volt phantom power for use with any condenser microphones
  • Auxilliary Tape/CD Inputs and Outputs
  • Pan Control on Each Channel


  • HD at +20 dBu, 20Hz-20KHz, input switch at -40dB <0.05%
  • IMD (SMPTE) at +20dBu, input switch at -40dB <0.02%
  • HUM & NOISE (20Hz-20KHz , input switch at -60dB)
  • Equivalent input hum and noise <-127dBu
  • Residual output noise, TRS outputs, all levels at minimum <-100dBu
  • Residual output noise, XLR outputs <-90dBu
  • Master Level at nominal, all Ch. Level controls at min <-84dBu
  • Master Level and one Ch. Level at nom <-80dBuIMUM VOLTAGE GAIN (±2dB)
  • Mic Input to Master Output, 600 ohm load <-84dB
  • Aux In to Master Output <-34dB
  • Frequency Response - 20Hz-20Khz +0/-0.5dB
  • Crosstalk - between any inputs or outputs 20Hz-20KHz <-60dB
  • VU METERS - Two 6-segment LED meters 0VU = +4dBu
  • Peak Clip indicator on each input channel and left and right outputs, illuminates 3dB below clipping
  • +48 VDC applied to all Mic Inputs, switchable on front panel.
  • Maximum total current draw = 80mA.
  • Maximum single channel current draw = 14mA.
  • Gradual power-up and down to eliminate "pops".
  • SHIPPING WEIGHT 13 lbs. Maximum
  • POWER REQUIREMENTS 100-240 Volts, 50-60 Hz, 30 watts
    19" wide x 1.75" high x 8.0" deep.

*Unless otherwise stated, specification conditions are: 150 ohm source, Input set at "-40", all
other controls set at nominal.

Add to Cart

We're sorry, only of this item available

Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM