Radio Design Labs ST-ACR1M
Audio-Controlled Mic Level Relay

OUR PART #  STACR1M


Radio Design Labs ST-ACR1M Audio Controlled Relay Overview

Each of the ST-ACR products is an Audio Controlled Relay in the group of STICK-ON series products by Radio Design Labs. These products are designed for quick, convenient installation, and reliable operation in a variety of control applications.

ST-ACR1M: This module is designed to switch on LOW-LEVEL sources, such as microphones or mic-level sources. Its relatively short release delay time makes it the optimum choice for voice applications where the source has not been preamped up to a line level.

NOTE: Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product.  Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

Features:

  • High-impedance bridging input connects across any audio line
  • Input may be connected to either balanced or unbalanced sources
  • Multiturn sensitivity adjustment permits precise threshold setting
  • Multiturn DELAY control adjusts relay release delay
  • Bandpass filtering yields triggering on characteristic audio spectrum
  • SLAVE open-collectorterminal allows additional relays to be added for more contacts (Radio DesignLabs' ST-LCR1 or ST-LCR2)
  • SLAVE terminal may be used with remote switch to manually over ride the control circuit and turn on the relay
Radio Design Labs STR-19A Rackmount System for 12 Stick-On Units

Radio Design Labs STR-19A Rackmount System for 12 Stick-On Units

Radio Design Labs' STR-19A Racking System holds up to 12 STICK-ONs in a 19" rack and only occupies two rack spaces.
Log In For Price
In Stock
Radio Design Labs PS-24AS 24 VDC 500mA Switching Power Supply, North American Model

Radio Design Labs PS-24AS 24 VDC 500mA Switching Power Supply, North American Model

Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products.Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, ...
Log In For Price
In Stock
Radio Design Labs ST-RRB1 Mounting Bracket for STICK-ON Modules

Radio Design Labs ST-RRB1 Mounting Bracket for STICK-ON Modules

Radio Design Labs' ST-RRB1 mounting kit contains a bracket to attach a STICK-ON module to a rear rack rail or to any flat surface. The module slides into the holder and snaps into position. The module may easily be removed.
Log In For Price
In Stock
Radio Design Labs DRA-35S  Din Rail Adaptor for STICK-ON

Radio Design Labs DRA-35S Din Rail Adaptor for STICK-ON

The DRA-35S is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module. The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a single DIN rail. Access to ...
Log In For Price
In Stock
Radio Design Labs STR-19B Rackmount Kit for 10 Stick-On Units

Radio Design Labs STR-19B Rackmount Kit for 10 Stick-On Units

Radio Design Labs' STR-19B Racking System holds up to 10 STICK-ON unitss in a 19 inch rack and only occupies two rack spaces. The STR-19B holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or ...
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs SR-4 Mounting Frame for Stick/TX

Radio Design Labs SR-4 Mounting Frame for Stick/TX

Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs SR-12A STICK-ON Series 19"W Mounting Rack for up to12 Modules

Radio Design Labs SR-12A STICK-ON Series 19"W Mounting Rack for up to12 Modules

Radio Design Labs' SR-12A chassis can be mounted in a rack or on a backboard to provide mounting of 12 STICK-ONs.
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs Smk 12 Mounting Strip for STICK-ON Units

Radio Design Labs Smk 12 Mounting Strip for STICK-ON Units

The SMK-12 allows removable surface (up to 6 units) or edge (typically 12, max. 16) mounting of STICK-ON units. They can be fastened to its surface using screws or adhesive foam pads.
Log In For Price
Usually ships in 7-14 business days.
Radio Design Labs Dtb Rdl Detachable Terminal Block

Radio Design Labs Dtb Rdl Detachable Terminal Block

Use DTB's to quickly detach and reattach wiring harness to STICK-ON units.
Log In For Price
Usually ships in 7-14 business days.

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM