Electro-Voice RE50N/D-BLACK
Omnidirectional Dynamic Microphone


Offspring of the Legendary RE50 Microphone

The Electro-Voice RE50N/D-B shock-mounted, dynamic omnidirectional microphones are offspring of the legendary RE50 microphone. Built with the same rugged design as the RE50, the RE50N/D-B features a DynaDamp shock mount for greater ruggedness and isolation, and a new neodymium N/DYM magnet structure to provide increased sensitivity required in exacting professional applications. Ideally suited for handheld broadcast and sound reinforcement applications, the RE50N/D-B has been built for superior isolation from mechanically induced noise.

Handling noise, clothing noise, and even cord shock are isolated from the microphone element. Within the microphone's machined-aluminum outercasing, a DynaDamp shock mount (manufactured using an advanced vibration isolation material) surrounds the high-mass internal acoustic chamber and microphone element, resulting in a degree of isolation unprecedented in an omnidirectional dynamic microphone. The transducer is protected through a unique interlocking concept, making the RE50N/D-B practically indestructible with normal use. The transducer, fitted within a high-mass internal case, is shock-isolated within an attractive external case, therefore protecting the transducer from sudden shock.

The microphone's diaphragm permits a very smooth response over a wide frequency range, yet it withstands high humidity and temperature extremes, corrosive effects of salt air and severe mechanical shocks. The diaphragm is protected from dust and magnetic particles by a carefully designed integral windscreen and blast filter which also provides excellent protection from wind noise, excessive sibilance and annoying "P-popping." The microphone's Memraflex grille is designed to bounce back to its original shape when bumped or dropped.The RE50N/D-B in "camera" black are ideal for "on-camera" use. All microphones are supplied with the 323S (black) stand adapter and a zippered, vinyl carrying pouch.

  • Shock-mounted N/DYM® handheld interview microphone
  • Same rugged design of the RE50/B with neodymium magnet structure
  • Features EV DynaDamp™ shock mount
  • Extremely low handling noise for superior sound
  • Mic-within-a-mic" concept reduces wind and P-popping noise
  • Generating Element: Dynamic
  • Frequency Response: 80-13,000 Hz
  • Polar Pattern: Omnidirectional
  • Impedance: 150 ohms balanced
  • Sensitivity at 1 kHz, Open-Circuit Voltage (0 dB = 1 mV/dyne/cm2): 2.0 mV
  • Power Level (0 dB = 1 mW/10 dynes/cm2): –51 dB
  • Diaphragm Material: Acoustalloy®
  • Magnetic Circuit: N/DYM® magnet in a nonwelded circuit
  • Microphone Connector: 3-pin, XLR-type, pin 2 positive
  • Polarity: Pin 2 positive, referenced to pin 3 with positive pressure on diaphragm
  • Case Material: Aluminum
  • Finish: Semigloss “camera” black
  • Accessories Included: 323S stand adapter (black); zippered vinyl carrying pouch
  • Dimensions
    • Length: 197 mm (7.75 in.)
    • Maximum Diameter: 49 mm (1.94 in.)
    • Shank Diameter: 25 mm (1.0 in.)
  • Package Size
    • Height: 76.2 mm (3.0 in.)
    • Width: 133.4 mm (5.25 in.)
    • Depth: 241.3 mm (9.5 in.)
  • Net Weight: 269 g (9.5 oz)
  • Shipping Weight: 539 g (19 oz)
Add to Cart

We're sorry, only of this item available

Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM