JBL CBT 100LA-1 Line Array Column Loudspeaker [USED ITEM]
with (16) 2-Inch Drivers

OUR PART #  CBT100LA-1-RST-02


The JBL CBT 100LA-1, with Constant Beamwidth Technology™, represents a breakthrough in pattern control consistency, utilizing complex analog delay beam-forming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor column speakers.

NOTE: This is a USED item that may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

JBL CBT 100LA-1 Features:

  • Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
  • Vertical pattern coverage switchable between 40° for medium-throw coverage and 15° for long-throw applications.
  • Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.
  • Dynamic SonicGuard™ overload protection
  • Swivel (pan)/tilt wall bracket included.
  • Built-in 70V/100V transformer, plus 8 ohm direct capability.

JBL CBT 100LA-1 Specifications:

  • Components: Sixteen 50 mm (2") Full-Range
  • Frequency Range (-10 dB): 80 Hz – 20 kHz
  • Vertical Coverage:
    • Narrow Mode: 15° (2 kHz - 16 kHz) (±10°)
    • Broad Mode: 40° (1 kHz -16 kHz) (±10°)
  • Horizontal Coverage: 150° (ave, 1 kHz – 4 kHz, ±20°)
  • Sensitivity (2.83V@ 1m):
    • Narrow:
      • Speech Mode: 96 dB (2 kHz - 14 kHz )
      • Music Mode: 93 dB (300 Hz - 18 kHz)
    • Broad:
      • Speech Mode: 93 dB (2 kHz - 14kHz)
      • Music Mode: 90 dB (300 Hz - 18 kHz)
  • Nominal Impedance: 8 ohms (in Thru mode)
  • Power Capacity (8 ohm setting):
    • 325 W (1300Wpeak), 2 hrs
    • 200 W (800W peak), 100 hrs
  • Max SPL:
    • Narrow:
      • Speech Mode: 121 dB cont ave (127 peak)
      • Music Mode: 118 dB cont ave (124 peak)
    • Broad:
      • Speech Mode: 118 dB cont ave (124 peak)
      • Music Mode: 115 dB cont ave (121 peak)
  • 70V/100V Transformer Taps: 120W, 60W, 30W (15W at 70V only), and 8 Ohms thru, via switch
  • Enclosure: Fiberglass reinforced ABS cabinet, painted aluminum grille
  • Outdoor Capability: IP-54 rated, per IEC529. UV, moisture and salt-spray resistant
  • Insert Points: 18 M6 insert points on back panel.
  • Mounting: Included swivel (pan)/tilt wall bracketprovides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles),continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points. Eighteen threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25" x 2") pattern for Omni Mount®30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.
  • Dimensions (HxWxD): 39.4" x 3.8" x 6" (1000 x 98.5 x 153 mm)
  • Net Weight: 15.8 lbs (7.2 kg)
  • Included Accessories: Swivel (pan) / tilt wall bracket
  • Optional Accessories:
    • MTC-PC2 terminal panel cover
    • MTC-CBT-FM1 flush-mount low-profile wall-mount bracket
    • MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand

JBL CBT 100LA-1 Line Array Column Loudspeaker [USED ITEM]
with (16) 2-Inch Drivers

OUR PART #  CBT100LA-1-RST-02

Product Information:

The JBL CBT 100LA-1, with Constant Beamwidth Technology™, represents a breakthrough in pattern control consistency, utilizing complex analog delay beam-forming and amplitude tapering to accomplish superior, consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor column speakers.

NOTE: This is a USED item that may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

JBL CBT 100LA-1 Features:

  • Patent-pending Constant Beamwidth Technology™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
  • Vertical pattern coverage switchable between 40° for medium-throw coverage and 15° for long-throw applications.
  • Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.
  • Dynamic SonicGuard™ overload protection
  • Swivel (pan)/tilt wall bracket included.
  • Built-in 70V/100V transformer, plus 8 ohm direct capability.

JBL CBT 100LA-1 Specifications:

  • Components: Sixteen 50 mm (2") Full-Range
  • Frequency Range (-10 dB): 80 Hz – 20 kHz
  • Vertical Coverage:
    • Narrow Mode: 15° (2 kHz - 16 kHz) (±10°)
    • Broad Mode: 40° (1 kHz -16 kHz) (±10°)
  • Horizontal Coverage: 150° (ave, 1 kHz – 4 kHz, ±20°)
  • Sensitivity (2.83V@ 1m):
    • Narrow:
      • Speech Mode: 96 dB (2 kHz - 14 kHz )
      • Music Mode: 93 dB (300 Hz - 18 kHz)
    • Broad:
      • Speech Mode: 93 dB (2 kHz - 14kHz)
      • Music Mode: 90 dB (300 Hz - 18 kHz)
  • Nominal Impedance: 8 ohms (in Thru mode)
  • Power Capacity (8 ohm setting):
    • 325 W (1300Wpeak), 2 hrs
    • 200 W (800W peak), 100 hrs
  • Max SPL:
    • Narrow:
      • Speech Mode: 121 dB cont ave (127 peak)
      • Music Mode: 118 dB cont ave (124 peak)
    • Broad:
      • Speech Mode: 118 dB cont ave (124 peak)
      • Music Mode: 115 dB cont ave (121 peak)
  • 70V/100V Transformer Taps: 120W, 60W, 30W (15W at 70V only), and 8 Ohms thru, via switch
  • Enclosure: Fiberglass reinforced ABS cabinet, painted aluminum grille
  • Outdoor Capability: IP-54 rated, per IEC529. UV, moisture and salt-spray resistant
  • Insert Points: 18 M6 insert points on back panel.
  • Mounting: Included swivel (pan)/tilt wall bracketprovides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles),continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points. Eighteen threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25" x 2") pattern for Omni Mount®30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.
  • Dimensions (HxWxD): 39.4" x 3.8" x 6" (1000 x 98.5 x 153 mm)
  • Net Weight: 15.8 lbs (7.2 kg)
  • Included Accessories: Swivel (pan) / tilt wall bracket
  • Optional Accessories:
    • MTC-PC2 terminal panel cover
    • MTC-CBT-FM1 flush-mount low-profile wall-mount bracket
    • MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM