Doug Fleenor Designs DMX12ANL-TB [RESTOCK ITEM]
12 Channel DMX to Analog Converter with Terminal Block

OUR PART #  DMX12ANL-TB-RST-01


The Doug Fleenor Design DMX12ANL is a 12 channel DMX512 to analog 0-10V interface with pluggable terminal blocks for the DMX512 in and thru connections. The analog outputs appear on the pluggable terminal blocks. Each analog output is capable of sourcing or sinking up to 15mA. No user adjustments or modifications are needed to select sourcing or sinking modes. Each output channel has a dedicated common terminal to ease field wiring. The DMX512 input is optically isolated from the analog outputs.

NOTE: This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

Doug Fleenor Design DMX12ANL-TB Specifications:

  • Input circuit: Protected EIA-485 receiver (LT1785)
  • Input protection: Undamaged by up to 60 Voltscontinuous, 15KV transients
  • Input signal: 0.2 volts minimum, 12 volts maximum,DMX512, DMX512/1990, or DMX512-A
  • Isolation: DMX512 input is optically isolated to 600Volts
  • Input/thru connector: DMX12ANL-TB: 3 positionpluggable terminal blocks
  • DMX12ANL-5: 5 pin gold plated Neutrik male (input)and female (thru) XLR connectors
  • Termination: None. Unused pass through connectionsmust be externally terminated
  • Power input: 120 VAC 60 Hz 0.5 Amps
  • Output connectors: Two 12 position pluggable terminalblocks. Each terminal block has 6 outputs and 6 commons
  • DMX footprint: Twelve consecutive DMX slots beginningwith the selected DMX starting address
  • DMX starting address: Three digit front panelthumbwheel switch. Address changes are immediate (no power cycling required)
  • Local control: Address switch setting of 601 turns onoutput 1, 602 turns on output 2, etc.
  • Switch setting of 697 turns on all outputs if any DMXlevel is above zero
  • Switch setting of 698 turns on all outputs if DMX ispresent
  • Switch setting of 699 turns on all outputs
  • Status indicators: Red POWER indicator
  • Green MIMIC 1 indicator mimics the level of output 1(useful in troubleshooting)
  • Green SIGNAL indicator illuminates when DMX512 ispresent; flashes when local control is active (address switch settings of 601thru 624 and 697 thru 699).
  • Cooling: Convection cooling, no fan required
  • Color: 
    • Top, bottom and sides: Silver hammer tone
    • Front and rear: black
  • Size and weight: 6.5" deep x 1.7” high x 8.25" wide,5 pounds. (19” rack adapter available)
  • Warranty: Five years parts and labor. Interface must be returned to DougFleenor Design for warranty repair. Shipping to Doug Fleenor Design is to bepaid by the customer. Return ground freight is paid by Doug Fleenor Design.Warranty covers manufacturing defects

Doug Fleenor Designs DMX12ANL-TB [RESTOCK ITEM]
12 Channel DMX to Analog Converter with Terminal Block

OUR PART #  DMX12ANL-TB-RST-01

Product Information:

The Doug Fleenor Design DMX12ANL is a 12 channel DMX512 to analog 0-10V interface with pluggable terminal blocks for the DMX512 in and thru connections. The analog outputs appear on the pluggable terminal blocks. Each analog output is capable of sourcing or sinking up to 15mA. No user adjustments or modifications are needed to select sourcing or sinking modes. Each output channel has a dedicated common terminal to ease field wiring. The DMX512 input is optically isolated from the analog outputs.

NOTE: This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

Doug Fleenor Design DMX12ANL-TB Specifications:

  • Input circuit: Protected EIA-485 receiver (LT1785)
  • Input protection: Undamaged by up to 60 Voltscontinuous, 15KV transients
  • Input signal: 0.2 volts minimum, 12 volts maximum,DMX512, DMX512/1990, or DMX512-A
  • Isolation: DMX512 input is optically isolated to 600Volts
  • Input/thru connector: DMX12ANL-TB: 3 positionpluggable terminal blocks
  • DMX12ANL-5: 5 pin gold plated Neutrik male (input)and female (thru) XLR connectors
  • Termination: None. Unused pass through connectionsmust be externally terminated
  • Power input: 120 VAC 60 Hz 0.5 Amps
  • Output connectors: Two 12 position pluggable terminalblocks. Each terminal block has 6 outputs and 6 commons
  • DMX footprint: Twelve consecutive DMX slots beginningwith the selected DMX starting address
  • DMX starting address: Three digit front panelthumbwheel switch. Address changes are immediate (no power cycling required)
  • Local control: Address switch setting of 601 turns onoutput 1, 602 turns on output 2, etc.
  • Switch setting of 697 turns on all outputs if any DMXlevel is above zero
  • Switch setting of 698 turns on all outputs if DMX ispresent
  • Switch setting of 699 turns on all outputs
  • Status indicators: Red POWER indicator
  • Green MIMIC 1 indicator mimics the level of output 1(useful in troubleshooting)
  • Green SIGNAL indicator illuminates when DMX512 ispresent; flashes when local control is active (address switch settings of 601thru 624 and 697 thru 699).
  • Cooling: Convection cooling, no fan required
  • Color: 
    • Top, bottom and sides: Silver hammer tone
    • Front and rear: black
  • Size and weight: 6.5" deep x 1.7” high x 8.25" wide,5 pounds. (19” rack adapter available)
  • Warranty: Five years parts and labor. Interface must be returned to DougFleenor Design for warranty repair. Shipping to Doug Fleenor Design is to bepaid by the customer. Return ground freight is paid by Doug Fleenor Design.Warranty covers manufacturing defects
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM