DBX ZC-BOB
Zone Control Break Out Box

OUR PART #  DBXBOB-V


The dbx ZC-BOB Zone Control Break Out Box uses analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ -45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.

The ZC-BOB allows “home run” or parallel wiring to the DriveRack and ZonePRO devices.

The remote device shall provide up to 6 RJ-45 input jacks for “Home Run” or parallel wiring configurations of the dbx ZC wall panel controllers, and one output RJ-45 jack for connection to the dbx® DriveRack® or ZonePRO™ device. The device shall be a dbx ZC-BOB remote controller.

dbx ZC-BOB Specifications:

  • Connectors: (2) RJ-45
  • Series Wiring:
    • Maximum Cable Length varies with number of Zone Controllers. For Example -
      • Three Zone Controllers: 600 ft
      • Six Zone Controllers: 300 ft
  • Parallel Wiring using ZC-BOB: Up to Six Zone Controllers (1000 ft)
  • Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher
  • Safety Agency Certifications: UL 60065, IEC 60065, EN 55013, E60065

DBX ZC-BOB
Zone Control Break Out Box

OUR PART #  DBXBOB-V

Product Information:

The dbx ZC-BOB Zone Control Break Out Box uses analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ -45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.

The ZC-BOB allows “home run” or parallel wiring to the DriveRack and ZonePRO devices.

The remote device shall provide up to 6 RJ-45 input jacks for “Home Run” or parallel wiring configurations of the dbx ZC wall panel controllers, and one output RJ-45 jack for connection to the dbx® DriveRack® or ZonePRO™ device. The device shall be a dbx ZC-BOB remote controller.

dbx ZC-BOB Specifications:

  • Connectors: (2) RJ-45
  • Series Wiring:
    • Maximum Cable Length varies with number of Zone Controllers. For Example -
      • Three Zone Controllers: 600 ft
      • Six Zone Controllers: 300 ft
  • Parallel Wiring using ZC-BOB: Up to Six Zone Controllers (1000 ft)
  • Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher
  • Safety Agency Certifications: UL 60065, IEC 60065, EN 55013, E60065
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM