Pathway Connectivity 1002 Opto-Splitter
4-Way eDIN Opto-Splitter with DIN Rail

OUR PART #  P1002


This eDIN system module is designed with pluggable screw terminals and pluggable IDC connectors, all with an included DIN rail, making Pathway Connectivity's 1002 Opto-Splitter an essential part of any permanent DMX512 distribution system. The DIN-rail mountable eDIN 1002 enables ‘star’ wiring configurations of DMX512 data lines while each buffered output is isolated from the DMX input and protects all connected end-devices from harmful electrical faults and ground loops.

Pathway Connectivity 1002 Opto-Splitter Includes:

  • DIN tray (housing) with end caps
  • 12” (300mm) x 35mm DIN rail
  • Installation/Operations manual

Pathway Connectivity 1002 Opto-Splitter Features:

  • One DMX512 input
  • Four buffered DMX512 outputs
  • One passive  DMX512 thru connector
  • Pluggable terminal  blocks for all connectors
  • Power and data easily daisy-chained between modules
  • DMX IN indicator
  • DC Power input indicator
  • ISO 5V indicator
  • Termination switch
  • No fuses— self-resetting port protection recovers from voltage faults
  • DIN rail mounting section included 

Pathway Connectivity 1002 Opto-Splitter Specifications:

  • Part Number: 1002
  • 1500V opto-isolation between input and output ports
  • 250V fault protection on input and output ports
  • Input operating voltage: 9-30 VDC
  • 5W power consumption
  • Operating conditions: -10 to +50°C; 10-90% relative humidity, non-condensing
  • Input Signal: USITT DMX512A
  • Output Signal: USITT DMX512A
  • Connections:
    • Two piece compression screw terminals
    • Accepts AWG 24 to 14, stranded or solid 
  • Compliance:
    • ANSI E1.11 DMX512-A(2008)/USITT DMX512 (1990)
    • RoHS 2002/95/EC
    • Class 2 Low Voltage 
  • Physical:
    • 0.50 lbs (0.26 kg)
    • 3.6” W x 4.5” L x 1.5” H  (91mm x 115mm x 38mm)

 

 


 

Pathway Connectivity 1105 eDIN System Enclosure with 9" Vertical DIN Rail
Pathway Connectivity 1105 eDIN System Enclosure with 9" Vertical DIN Rail
The Pathway Connectivity 1105 eDIN system enclosure is an ETL-listed NEMA1 enclosure for eDIN modules with a power supply.Pathway Connectivty P1105 Features: Contractor friendly, sturdy steel construction Conduit knockouts provided on ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Pathway Connectivity P1109  Expanded eDIN System Enclosure
Pathway Connectivity P1109 Expanded eDIN System Enclosure
NOTE: Some gear shown above are NOT INCLUDED and sold separately. For more information on this and other products, please contact your Sales Pro.  The 1109 Expanded Pathway eDIN Enclosure is an ETL-Listed NEMA1 Enclosure for ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Pathway Connectivity 1106 10" x 23" x 4.5" eDIN System Enclosure with One 19.5" Vertical DIN Rail
Pathway Connectivity 1106 10" x 23" x 4.5" eDIN System Enclosure with One 19.5" Vertical DIN Rail
This Pathway eDIN Large enclosure [1106] is an ETL-listed NEMA1 enclosure for eDIN modules with a power supply. This model has a single 19.5" Vertical DIN Rail with the enclosure.  Pathway 1106 Features: Contractor friendly, ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Pathway Connectivity 1107 10" x 23" x 4.5" eDIN System Enclosure with Three 9" Horizontal DIN Rails
Pathway Connectivity 1107 10" x 23" x 4.5" eDIN System Enclosure with Three 9" Horizontal DIN Rails
This Pathway eDIN Large enclosure [1107] is an ETL-listed NEMA1 enclosure for eDIN modules with a power supply. This model has a trio of 9" Vertical DIN Rails within the enclosure.  Pathway 1107 eDIN Enclosure Features: ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Pathway Connectivity P1108 eDIN System Enclosure with Two 9" Horizontal DIN Rails
Pathway Connectivity P1108 eDIN System Enclosure with Two 9" Horizontal DIN Rails
The Pathway Connectivity 1108 eDIN system enclosure is an ETL-listed NEMA1 enclosure for eDIN modules with a power supply.Pathway Connectivty P1105 Features: Contractor friendly, sturdy steel construction Conduit knockouts provided on ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Pathway Connectivity 1103 eDIN Rack Mount Panel
Pathway Connectivity 1103 eDIN Rack Mount Panel
The Pathway Connectivity Solutions 1103 Rack Panel Adapter Kit snaps into the eDIN module. The handy built-in cable management system keeps things tidy when making external connections.Pathway Connectivity P1103 Features: Standard 19” ...

Usually ships in 7-14 business days.
Need it sooner? Call us!

Pathway Connectivity 1002 Opto-Splitter
4-Way eDIN Opto-Splitter with DIN Rail

OUR PART #  P1002

Product Information:

This eDIN system module is designed with pluggable screw terminals and pluggable IDC connectors, all with an included DIN rail, making Pathway Connectivity's 1002 Opto-Splitter an essential part of any permanent DMX512 distribution system. The DIN-rail mountable eDIN 1002 enables ‘star’ wiring configurations of DMX512 data lines while each buffered output is isolated from the DMX input and protects all connected end-devices from harmful electrical faults and ground loops.

Pathway Connectivity 1002 Opto-Splitter Includes:

  • DIN tray (housing) with end caps
  • 12” (300mm) x 35mm DIN rail
  • Installation/Operations manual

Pathway Connectivity 1002 Opto-Splitter Features:

  • One DMX512 input
  • Four buffered DMX512 outputs
  • One passive  DMX512 thru connector
  • Pluggable terminal  blocks for all connectors
  • Power and data easily daisy-chained between modules
  • DMX IN indicator
  • DC Power input indicator
  • ISO 5V indicator
  • Termination switch
  • No fuses— self-resetting port protection recovers from voltage faults
  • DIN rail mounting section included 

Pathway Connectivity 1002 Opto-Splitter Specifications:

  • Part Number: 1002
  • 1500V opto-isolation between input and output ports
  • 250V fault protection on input and output ports
  • Input operating voltage: 9-30 VDC
  • 5W power consumption
  • Operating conditions: -10 to +50°C; 10-90% relative humidity, non-condensing
  • Input Signal: USITT DMX512A
  • Output Signal: USITT DMX512A
  • Connections:
    • Two piece compression screw terminals
    • Accepts AWG 24 to 14, stranded or solid 
  • Compliance:
    • ANSI E1.11 DMX512-A(2008)/USITT DMX512 (1990)
    • RoHS 2002/95/EC
    • Class 2 Low Voltage 
  • Physical:
    • 0.50 lbs (0.26 kg)
    • 3.6” W x 4.5” L x 1.5” H  (91mm x 115mm x 38mm)

 

 


 

Pathway Connectivity 1105 eDIN System Enclosure with 9" Vertical DIN Rail
Pathway Connectivity 1105 eDIN System Enclosure with 9" Vertical DIN Rail
The Pathway Connectivity 1105 eDIN system enclosure is an ETL-listed NEMA1 enclosure for eDIN modules with a power supply.Pathway Connectivty P1105 Features: Contractor friendly, sturdy steel construction Conduit knockouts provided on ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Pathway Connectivity P1109  Expanded eDIN System Enclosure
Pathway Connectivity P1109 Expanded eDIN System Enclosure
NOTE: Some gear shown above are NOT INCLUDED and sold separately. For more information on this and other products, please contact your Sales Pro.  The 1109 Expanded Pathway eDIN Enclosure is an ETL-Listed NEMA1 Enclosure for ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Pathway Connectivity 1106 10" x 23" x 4.5" eDIN System Enclosure with One 19.5" Vertical DIN Rail
Pathway Connectivity 1106 10" x 23" x 4.5" eDIN System Enclosure with One 19.5" Vertical DIN Rail
This Pathway eDIN Large enclosure [1106] is an ETL-listed NEMA1 enclosure for eDIN modules with a power supply. This model has a single 19.5" Vertical DIN Rail with the enclosure.  Pathway 1106 Features: Contractor friendly, ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Pathway Connectivity 1107 10" x 23" x 4.5" eDIN System Enclosure with Three 9" Horizontal DIN Rails
Pathway Connectivity 1107 10" x 23" x 4.5" eDIN System Enclosure with Three 9" Horizontal DIN Rails
This Pathway eDIN Large enclosure [1107] is an ETL-listed NEMA1 enclosure for eDIN modules with a power supply. This model has a trio of 9" Vertical DIN Rails within the enclosure.  Pathway 1107 eDIN Enclosure Features: ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Pathway Connectivity P1108 eDIN System Enclosure with Two 9" Horizontal DIN Rails
Pathway Connectivity P1108 eDIN System Enclosure with Two 9" Horizontal DIN Rails
The Pathway Connectivity 1108 eDIN system enclosure is an ETL-listed NEMA1 enclosure for eDIN modules with a power supply.Pathway Connectivty P1105 Features: Contractor friendly, sturdy steel construction Conduit knockouts provided on ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Pathway Connectivity 1103 eDIN Rack Mount Panel
Pathway Connectivity 1103 eDIN Rack Mount Panel
The Pathway Connectivity Solutions 1103 Rack Panel Adapter Kit snaps into the eDIN module. The handy built-in cable management system keeps things tidy when making external connections.Pathway Connectivity P1103 Features: Standard 19” ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM