JBL Control 14C/T [B-STOCK MODEL]
4" 2 Way Ceiling Speaker in White

OUR PART #  CONTROL-14C/T-BSTOCK


JBL's Control 14C/T is a full-range ceiling speaker consisting of a 100 mm (4 inch) high tech cone driver and a 19 mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blind-mount backcan for quick and easy installation.

NOTE: This is a B-STOCK item. It may have cosmetic flaws, but is guaranteed to be in proper working order. Please contact your Sales Pro for more information on this and other products.

JBL Control 14C/T Includes:

  • C-ring support backing plate
  • 2 tile support rails (for 2 ft or 600 mm tile spans; optional MTC-48TR extension availablefor larger 4 ft or 1200 mm tile spans)
  • Cutout template
  • Paint shield
  • Removable locking multi-pin connector
  • Grille

JBL Control 14C/T Features:

  • Components:
    • 100 mm (4") high output driver with polypropylene cone and butyl rubber surround
    • 19 mm (0.75") soft-dome liquid-cooled tweeter
  • Blind-mount backcan for quick and easy install
  • Dual conduit/cable clamps
  • Combined 70V/100V and low impedance direct operation
    • 30 Watts at 8Ohm nominal setting
    • 25W multi-tap at 70V/100V
  • 74 Hz – 20 kHz bandwidth with wide 120° coverage

JBL Control 14C/T Specifications:

  • Frequency Range (-10 dB): 74 Hz – 20kHz
  • Power Capacity (at low-Z): 60 Watts Continuous Program Power, 30 Watts Continuous Pink Noise
  • Transformer Taps: 25 W, 12.5 W, 6.3 W@ 70V or 100V (plus 3.2 W @ 70V only)
  • Frequency Response (±3 dB): 100 Hz –20 kHz
  • Nominal Sensitivity: 87 dB
  • Nominal Coverage Angle: 120° conical coverage
  • Directivity Factor (Q): 7.6
  • Directivity Index (DI): 8.1 dB
  • Rated Maximum SPL: 102 dB @ 1 m (3.3 ft) average, 108 dB peak
  • Nominal Impedance: 8 ohms (indirect/bypass 8 Ohm setting)
  • Crossover Network: 12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) high-pass to HF driver
  • LF Driver: 100 mm (4") with polypropylene cone, butyl rubber surround, anodized aluminum voice coil-former, high temperature voice coil
  • HF Driver: 19 mm (3/4"), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide
  • Input Connector: Removable locking 4-pin connector with screw-down terminals. Max wire size 12 AWG (2.5 mm2)
  • Connector Wiring: Pin 1 = + In; Pin 2= - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru
  • Strain Reliefs: Strain relief for two cables or two flex conduits via coupled clamping mechanism
  • Materials: ABS baffle with UL94-V0 and UL94-5VB flame class fire rating. Zinc-plated steel backcan
  • Safety Agency: UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systems
  • Dimensions (Diameter x Depth): 196 x 181 mm from back of baffle (7.7" x 7.1")
  • Ceiling Cutout Size: Circular cutout with 170 mm (6.7") diameter (cardboard cutout template included)
  • Ceiling Thickness Range: Up to 35 mm (1.4") with stock dog-ears. MTC-TCD thick-ceiling dog-ears available for up to 55 mm (2.2") ceiling thicknesses
  • Safety Seismic Attachment: One point, top surface
  • Net Weight: 2.2 kg (4.8 lbs, one speaker)
  • Shipping Weight: 8.2 kg (17.9 lbs, pair inmaster carton)

JBL Control 14C/T [B-STOCK MODEL]
4" 2 Way Ceiling Speaker in White

OUR PART #  CONTROL-14C/T-BSTOCK

Product Information:

JBL's Control 14C/T is a full-range ceiling speaker consisting of a 100 mm (4 inch) high tech cone driver and a 19 mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blind-mount backcan for quick and easy installation.

NOTE: This is a B-STOCK item. It may have cosmetic flaws, but is guaranteed to be in proper working order. Please contact your Sales Pro for more information on this and other products.

JBL Control 14C/T Includes:

  • C-ring support backing plate
  • 2 tile support rails (for 2 ft or 600 mm tile spans; optional MTC-48TR extension availablefor larger 4 ft or 1200 mm tile spans)
  • Cutout template
  • Paint shield
  • Removable locking multi-pin connector
  • Grille

JBL Control 14C/T Features:

  • Components:
    • 100 mm (4") high output driver with polypropylene cone and butyl rubber surround
    • 19 mm (0.75") soft-dome liquid-cooled tweeter
  • Blind-mount backcan for quick and easy install
  • Dual conduit/cable clamps
  • Combined 70V/100V and low impedance direct operation
    • 30 Watts at 8Ohm nominal setting
    • 25W multi-tap at 70V/100V
  • 74 Hz – 20 kHz bandwidth with wide 120° coverage

JBL Control 14C/T Specifications:

  • Frequency Range (-10 dB): 74 Hz – 20kHz
  • Power Capacity (at low-Z): 60 Watts Continuous Program Power, 30 Watts Continuous Pink Noise
  • Transformer Taps: 25 W, 12.5 W, 6.3 W@ 70V or 100V (plus 3.2 W @ 70V only)
  • Frequency Response (±3 dB): 100 Hz –20 kHz
  • Nominal Sensitivity: 87 dB
  • Nominal Coverage Angle: 120° conical coverage
  • Directivity Factor (Q): 7.6
  • Directivity Index (DI): 8.1 dB
  • Rated Maximum SPL: 102 dB @ 1 m (3.3 ft) average, 108 dB peak
  • Nominal Impedance: 8 ohms (indirect/bypass 8 Ohm setting)
  • Crossover Network: 12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) high-pass to HF driver
  • LF Driver: 100 mm (4") with polypropylene cone, butyl rubber surround, anodized aluminum voice coil-former, high temperature voice coil
  • HF Driver: 19 mm (3/4"), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide dispersion waveguide
  • Input Connector: Removable locking 4-pin connector with screw-down terminals. Max wire size 12 AWG (2.5 mm2)
  • Connector Wiring: Pin 1 = + In; Pin 2= - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru
  • Strain Reliefs: Strain relief for two cables or two flex conduits via coupled clamping mechanism
  • Materials: ABS baffle with UL94-V0 and UL94-5VB flame class fire rating. Zinc-plated steel backcan
  • Safety Agency: UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable for use in air handling spaces, Signaling Speaker; Transformer UL registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and UL94-5VB flammability rating; In accordance with IEC60849/EN60849 systems
  • Dimensions (Diameter x Depth): 196 x 181 mm from back of baffle (7.7" x 7.1")
  • Ceiling Cutout Size: Circular cutout with 170 mm (6.7") diameter (cardboard cutout template included)
  • Ceiling Thickness Range: Up to 35 mm (1.4") with stock dog-ears. MTC-TCD thick-ceiling dog-ears available for up to 55 mm (2.2") ceiling thicknesses
  • Safety Seismic Attachment: One point, top surface
  • Net Weight: 2.2 kg (4.8 lbs, one speaker)
  • Shipping Weight: 8.2 kg (17.9 lbs, pair inmaster carton)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM