ETC/Elec Theatre Controls ColorSource CYC with Edison Power Connector
LED Cyclorama Fixture in Black

OUR PART #  CSCYC-A


With a compact design that houses a unique, 5-color LED array, the ColorSource®CYC from ETC is a useful fixture that will change your lighting design ways. This dedicated cyclorama fixture has been designed with the sole purpose of creating beautiful, smooth washes of light on a cyclorama or wall. Adding to the attractiveness of this LED fixture is that its ETC's initial fixture to use their innovative five-color mix of red, green, blue, lime, and indigo for expanded range and color control. Now your cyclorama finally gets the attention it deserves.

This ColorSource model, the CSCYC-A comes with an Edison power connector and is in the color black. The ColorSource®CYC fixture has a compact and lightweight design, so it fits easily on your stage floor or hangs from a pipe. Plus, this fixture is fanless, and all-LED, so it consumes a fraction of the power of other standard CYC fixtures. And LED means no more gel! Your budget can go toward something other than replacing lamp after expensive lamp, and the saturated colored gel that burns through after a couple of shows.

ETC ColorSource CYC Includes:

  • Hanging yoke
  • Power cable

NOTE: C-clamp sold separately.

ETC ColorSource CYC Features:

  • Compact Design
  • Unique, all LED (RGBI-L) 5-color array
  • Rich, bright light
  • Fanless operation
  • Stand-alone presets and sequences
  • Simple setup and user interface

ETC ColorSource CYC Specifications:

  • Model: CSCYC-A (Edison power connector)
  • Source:
    • LED Details: 42 Lumileds LUXEON C LEDs
    • Max Lumens: 4117
    • Lumens Per Watt: 31
    • L70 Rating (Hours to 70% output): 50,000 hours (estimate pending testing data)
  • Color: 
    • Colors Used: Red, green, blue, indigo and lime
    • Color temperature range: Variable
    • Calibrated Array: Yes
    • Red Shift: No
  • Optical: 
    • Beam angle range: N/A (asymmetrical)
    • Gate size: N/A
    • Aperture size: N/A
    • Pattern projection: No
    • Pattern size: N/A
    • Camera flicker control/Hz range: 1,200 Hz (default) and 25,000 Hz (via RDM)

Note: The ColorSource CYC has a built in accessory for spill control

  • Control:
    • Input method: DMX-512 via 5-pin XLR or RJ45 connector
    • Protocols: DMX
    • Modes (Footprint):
    • 5 channel- IRGBS (5)
    • Direct- IRGBILS (7)
    • 1 channel- I (1)
    • RGB- RGB (3)
    • RDM configuration: Yes
    • UI type: 7-segment address display
    • Local control: Yes
    • Onboard presets: Yes (12)
    • Onboard sequences: Yes (5)
    • Onboard effects: No
    • Fixture to fixture control: Yes

Note: Local level control via UI

  • Electrical:
    • Voltage range: 100V-240VAC, 50/60Hz
    • Input method: powerCON in and thru
    • Inrush: 39A (first half-cycle) at 120V
    • Fixtures per circuit: 9 (20A switched circuit, R20 module or similar)
    • Wattage (Typical/Standby): 133W/1.4W
    • Current draw: 1.11A at 120V
  • Thermal:
    • Ambient operating temp: 32-104° F (0-40° C)
    • Fan (controllable): No (N/A)
    • Droop compensation: Yes
    • dB range: 18.5dBa average at 1m
    • BTUs/hour: 418
  • Physical:
    • Materials: Die-cast aluminum and plastic
    • Color options: Black, white, silver or custom color
    • Mounting options: Yoke and floor
    • IP rating: IP-20
    • Weight 10.3 lbs (4.67 kg)

 


 

ETC/Elec Theatre Controls 400CC C-Clamp for ETC Fixtures, Black
ETC/Elec Theatre Controls 400CC C-Clamp for ETC Fixtures, Black
This C-Clamp from ETC is useful for mounting and locking lighting fixtures to a grid pipe and includes an M12 thread screw for the fixture yoke.
ETC/Elec Theatre Controls 400SC 30" Source Four Safety Cable in Black
ETC/Elec Theatre Controls 400SC 30" Source Four Safety Cable in Black
This black safety is 30" in length and is a useful Source Four fixture accessory.Specifications: Cable is a 30" long, 1/8" diameter black wire rope cable with snap clamp fitted. The safety ratio of the cable is 5:1 The breaking load ...
ETC/Elec Theatre Controls DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC/Elec Theatre Controls DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC's DPJ-10 is a 10 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.

Usually ships in 7-14 business days.
Need it sooner? Call us!
ETC/Elec Theatre Controls DPA-A 5ft ETC PowerCon to Edison Connector Cable
ETC/Elec Theatre Controls DPA-A 5ft ETC PowerCon to Edison Connector Cable
The DPA-A from ETC is a 5-foot Powercon to parallel blade U-ground (Edison) connector cable. This item is compatible with the following ETC products: ColorSource PAR ColorSource SPOTSource Four LED Source Four LED Studio HD ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
ETC/Elec Theatre Controls DPJ-5  5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC/Elec Theatre Controls DPJ-5 5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC's DPJ-5 is a 5 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.

Usually ships in 7-14 business days.
Need it sooner? Call us!

ETC/Elec Theatre Controls ColorSource CYC with Edison Power Connector
LED Cyclorama Fixture in Black

OUR PART #  CSCYC-A

Product Information:

With a compact design that houses a unique, 5-color LED array, the ColorSource®CYC from ETC is a useful fixture that will change your lighting design ways. This dedicated cyclorama fixture has been designed with the sole purpose of creating beautiful, smooth washes of light on a cyclorama or wall. Adding to the attractiveness of this LED fixture is that its ETC's initial fixture to use their innovative five-color mix of red, green, blue, lime, and indigo for expanded range and color control. Now your cyclorama finally gets the attention it deserves.

This ColorSource model, the CSCYC-A comes with an Edison power connector and is in the color black. The ColorSource®CYC fixture has a compact and lightweight design, so it fits easily on your stage floor or hangs from a pipe. Plus, this fixture is fanless, and all-LED, so it consumes a fraction of the power of other standard CYC fixtures. And LED means no more gel! Your budget can go toward something other than replacing lamp after expensive lamp, and the saturated colored gel that burns through after a couple of shows.

ETC ColorSource CYC Includes:

  • Hanging yoke
  • Power cable

NOTE: C-clamp sold separately.

ETC ColorSource CYC Features:

  • Compact Design
  • Unique, all LED (RGBI-L) 5-color array
  • Rich, bright light
  • Fanless operation
  • Stand-alone presets and sequences
  • Simple setup and user interface

ETC ColorSource CYC Specifications:

  • Model: CSCYC-A (Edison power connector)
  • Source:
    • LED Details: 42 Lumileds LUXEON C LEDs
    • Max Lumens: 4117
    • Lumens Per Watt: 31
    • L70 Rating (Hours to 70% output): 50,000 hours (estimate pending testing data)
  • Color: 
    • Colors Used: Red, green, blue, indigo and lime
    • Color temperature range: Variable
    • Calibrated Array: Yes
    • Red Shift: No
  • Optical: 
    • Beam angle range: N/A (asymmetrical)
    • Gate size: N/A
    • Aperture size: N/A
    • Pattern projection: No
    • Pattern size: N/A
    • Camera flicker control/Hz range: 1,200 Hz (default) and 25,000 Hz (via RDM)

Note: The ColorSource CYC has a built in accessory for spill control

  • Control:
    • Input method: DMX-512 via 5-pin XLR or RJ45 connector
    • Protocols: DMX
    • Modes (Footprint):
    • 5 channel- IRGBS (5)
    • Direct- IRGBILS (7)
    • 1 channel- I (1)
    • RGB- RGB (3)
    • RDM configuration: Yes
    • UI type: 7-segment address display
    • Local control: Yes
    • Onboard presets: Yes (12)
    • Onboard sequences: Yes (5)
    • Onboard effects: No
    • Fixture to fixture control: Yes

Note: Local level control via UI

  • Electrical:
    • Voltage range: 100V-240VAC, 50/60Hz
    • Input method: powerCON in and thru
    • Inrush: 39A (first half-cycle) at 120V
    • Fixtures per circuit: 9 (20A switched circuit, R20 module or similar)
    • Wattage (Typical/Standby): 133W/1.4W
    • Current draw: 1.11A at 120V
  • Thermal:
    • Ambient operating temp: 32-104° F (0-40° C)
    • Fan (controllable): No (N/A)
    • Droop compensation: Yes
    • dB range: 18.5dBa average at 1m
    • BTUs/hour: 418
  • Physical:
    • Materials: Die-cast aluminum and plastic
    • Color options: Black, white, silver or custom color
    • Mounting options: Yoke and floor
    • IP rating: IP-20
    • Weight 10.3 lbs (4.67 kg)

 


 

ETC/Elec Theatre Controls 400CC C-Clamp for ETC Fixtures, Black
ETC/Elec Theatre Controls 400CC C-Clamp for ETC Fixtures, Black
This C-Clamp from ETC is useful for mounting and locking lighting fixtures to a grid pipe and includes an M12 thread screw for the fixture yoke.
ETC/Elec Theatre Controls 400SC 30" Source Four Safety Cable in Black
ETC/Elec Theatre Controls 400SC 30" Source Four Safety Cable in Black
This black safety is 30" in length and is a useful Source Four fixture accessory.Specifications: Cable is a 30" long, 1/8" diameter black wire rope cable with snap clamp fitted. The safety ratio of the cable is 5:1 The breaking load ...
ETC/Elec Theatre Controls DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC/Elec Theatre Controls DPJ-10 10 ft. PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC's DPJ-10 is a 10 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.

Usually ships in 7-14 business days.
Need it sooner? Call us!
ETC/Elec Theatre Controls DPA-A 5ft ETC PowerCon to Edison Connector Cable
ETC/Elec Theatre Controls DPA-A 5ft ETC PowerCon to Edison Connector Cable
The DPA-A from ETC is a 5-foot Powercon to parallel blade U-ground (Edison) connector cable. This item is compatible with the following ETC products: ColorSource PAR ColorSource SPOTSource Four LED Source Four LED Studio HD ...

Usually ships in 7-14 business days.
Need it sooner? Call us!
ETC/Elec Theatre Controls DPJ-5  5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC/Elec Theatre Controls DPJ-5 5 ft PowerCon Male to Female Fixture to Fixture Power Thru Jumper
ETC's DPJ-5 is a 5 ft. PowerCon male to female fixture to fixture poewr-thru jumper cable.  This cable connects to the Desire D40 or D60's output (thru) connector to provide link to successive fixtures.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM