Clear-Com RS702 [RESTOCK ITEM]
2-Channel Belt Pack

OUR PART #  RS702-RST-04


NOTE: This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

The Clear-Com RS-702 is a two-channel analog beltpack with an XLR-6 line connector and XLR-4M headset connector. A mic preamp with a dynamic range of 130 db enables intelligible voice communication for every volume level, from a whisper to a shout. The beltpack also combines high headroom, low-noise audio and shaped frequency contour (Clear-Com Sound) to deliver crystal-clear audio.

The RS-702 is compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces.

ClearCom RS-702 Specifications:

  • Microphone Pre-Amplifier
    • Mic to Line (without limiter acting) Frequency Response: 280 – 15k Hz ± 3dB
    • Microphone output to line – Audio Level (-50dBm Electret input): -9dBm
    • Microphone output to line – Distortion: <0.1%
    • Microphone output to line – Signal to Noise: >65dB
    • Clear-Com Sound: Yes
  • Headphone Amplifier
    • Frequency Response – Line to Headphone: 150 – 20k Hz ± 3dB
    • Headphone input from line – Audio Level (-9dBm Electret input): 7dBm
    • Headphone input from line – Distortion: <0.5%
    • Headphone input from line – Signal to Noise: >50dB
    • Earphone to Mic – Crosstalk: >80dB
    • Sidetone – Adjustment Range (-80db mic input): >45dB
  • Keypad Indicators
    • Power: Green LED
    • Talk A: Green LED
    • Call A: Orange LED
    • Talk B: Green LED
    • Call B: Orange LED
  • Connectors
    • Intercom Line: (2) 6-pin XLR–M–F Ch. 1 2-Wire
    • Intercom Channel
      • Pin 1: Common
      • Pin 2: PL Power (+28VDC)
      • Pin 3: PL Ch-B
      • Pin 4: PL Ch-A
      • Pin 5: Program Audio
      • Pin 6: Program Audio
    • Headset: 4-pin XLR–M
    • Headset Connector
      • Pin 1: Mic - (Mic Common)
      • Pin 2: Mic +
      • Pin 3: Spkr-
      • Pin 4: Spkr+ (&0.5*VCCDC Supply between Pin 4 & Pin 1)
    • Program Audio Input: XLR-6, pins 5 & 6
  • Power Requirements
    • Voltage input range: 12 MIN - 30 MAX VDC
    • Current (all inputs off): ~13mA MAX
    • Call Voltages – Call Voltage: 16.5V dc
    • Call Voltages – Min Call Voltage needed: 3.3V
  • Environmental
    • Operating Temp: Range: 32°F - 158°F (0°C - 70°C)
    • Storage Temp Range: 32°F - 158°F (0°C - 70°C)
    • Relative Humidity: 0 - 90% non condensing
  • Dimensions (HxWxD): 3.4" x 4.5" x 1.7"
  • Weight: 0.68lbs

Click to download

Clear-Com RS702 [RESTOCK ITEM]
2-Channel Belt Pack

OUR PART #  RS702-RST-04

Product Information:

NOTE: This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

The Clear-Com RS-702 is a two-channel analog beltpack with an XLR-6 line connector and XLR-4M headset connector. A mic preamp with a dynamic range of 130 db enables intelligible voice communication for every volume level, from a whisper to a shout. The beltpack also combines high headroom, low-noise audio and shaped frequency contour (Clear-Com Sound) to deliver crystal-clear audio.

The RS-702 is compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces.

ClearCom RS-702 Specifications:

  • Microphone Pre-Amplifier
    • Mic to Line (without limiter acting) Frequency Response: 280 – 15k Hz ± 3dB
    • Microphone output to line – Audio Level (-50dBm Electret input): -9dBm
    • Microphone output to line – Distortion: <0.1%
    • Microphone output to line – Signal to Noise: >65dB
    • Clear-Com Sound: Yes
  • Headphone Amplifier
    • Frequency Response – Line to Headphone: 150 – 20k Hz ± 3dB
    • Headphone input from line – Audio Level (-9dBm Electret input): 7dBm
    • Headphone input from line – Distortion: <0.5%
    • Headphone input from line – Signal to Noise: >50dB
    • Earphone to Mic – Crosstalk: >80dB
    • Sidetone – Adjustment Range (-80db mic input): >45dB
  • Keypad Indicators
    • Power: Green LED
    • Talk A: Green LED
    • Call A: Orange LED
    • Talk B: Green LED
    • Call B: Orange LED
  • Connectors
    • Intercom Line: (2) 6-pin XLR–M–F Ch. 1 2-Wire
    • Intercom Channel
      • Pin 1: Common
      • Pin 2: PL Power (+28VDC)
      • Pin 3: PL Ch-B
      • Pin 4: PL Ch-A
      • Pin 5: Program Audio
      • Pin 6: Program Audio
    • Headset: 4-pin XLR–M
    • Headset Connector
      • Pin 1: Mic - (Mic Common)
      • Pin 2: Mic +
      • Pin 3: Spkr-
      • Pin 4: Spkr+ (&0.5*VCCDC Supply between Pin 4 & Pin 1)
    • Program Audio Input: XLR-6, pins 5 & 6
  • Power Requirements
    • Voltage input range: 12 MIN - 30 MAX VDC
    • Current (all inputs off): ~13mA MAX
    • Call Voltages – Call Voltage: 16.5V dc
    • Call Voltages – Min Call Voltage needed: 3.3V
  • Environmental
    • Operating Temp: Range: 32°F - 158°F (0°C - 70°C)
    • Storage Temp Range: 32°F - 158°F (0°C - 70°C)
    • Relative Humidity: 0 - 90% non condensing
  • Dimensions (HxWxD): 3.4" x 4.5" x 1.7"
  • Weight: 0.68lbs

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM