ETC/Elec Theatre Controls D15
Dual 15A Dimmer Module

OUR PART #  D15


The ETC 7050A1001 D15 Standard Dimmer Module is designed for use in both Sensor®+ and Unison® Dimming Series modular rack enclosures. Standard Dimmer Modules provide cost-effective digital forward phase angle dimming for standard loads such as incandescent, low voltage, quartz, neon, cold-cathode and 2 and 4-wire fluorescent ballasts. The patented, high-density, dual modules feature modular installation and removal, fully magnetic circuit breakers and standard or enhanced risetime toroidal filters.

Applications:

  • Incandescent lighting
  • Low voltage lighting
  • Quartz lighting
  • Neon lighting
  • Cold Cathode lighting
  • 2-wire Fluorescent ballast
  • 4-wire Fluorescent ballast

ETC D15 Features:

  • Two 1.8 or 2.4kW dimmers per module
  • Standard or Enhanced risetime toroidal filters
  • High-density modular assembly
  • Die-cast aluminum chassis
  • Fully magnetic circuit breakers

ETC D15 Specifications:

  • Physical:
    • Modular plug-in assemblies
    • Cast aluminum chassis, finished with textured epoxy paint
    • Keyed to prevent insertion in inappropriately rated rack positions
  • Circuit Breakers:
    • Fully magnetic to eliminate nuisance tripping
    • 20x inrush current rating
    • 125%, 10-120 seconds, must-trip rating
    • Rated for 100% switching duty applications
  • Ratings:
    • 100,000A Short Circuit Current Rating Rating (SCCR)
    • Modules withstand hot-patching of cold loads up to full rating
    • UL and cUL LISTED
  • Power Device:
    • Sealed, patented assembly
    • Field replaceable with screwdriver
    • Two back-to-back SCRs per circuit
    • One control LED per circuit
    • Integral bonded heatsink
    • Integral temperature sensor
  • Filtering:
    • High quality toroidal filters: 350µS risetime - Standard 100-120V modules
      * Risetime measured at full load, at worst case firing angle (90°), from 10-90% of output wave form
  • Dimmer Range:
    • Incandescent, low voltage dimming range 100-0%
    • Dimming range of 2 and 4-wire fluorescent ballast is dependent on lamp ballast combination. Contact ETC for range verification
    • Sizing of Neon transformer used in dimming applications should be 1.5x greater than size used in non-dimming application

ETC/Elec Theatre Controls D15
Dual 15A Dimmer Module

OUR PART #  D15

Product Information:

The ETC 7050A1001 D15 Standard Dimmer Module is designed for use in both Sensor®+ and Unison® Dimming Series modular rack enclosures. Standard Dimmer Modules provide cost-effective digital forward phase angle dimming for standard loads such as incandescent, low voltage, quartz, neon, cold-cathode and 2 and 4-wire fluorescent ballasts. The patented, high-density, dual modules feature modular installation and removal, fully magnetic circuit breakers and standard or enhanced risetime toroidal filters.

Applications:

  • Incandescent lighting
  • Low voltage lighting
  • Quartz lighting
  • Neon lighting
  • Cold Cathode lighting
  • 2-wire Fluorescent ballast
  • 4-wire Fluorescent ballast

ETC D15 Features:

  • Two 1.8 or 2.4kW dimmers per module
  • Standard or Enhanced risetime toroidal filters
  • High-density modular assembly
  • Die-cast aluminum chassis
  • Fully magnetic circuit breakers

ETC D15 Specifications:

  • Physical:
    • Modular plug-in assemblies
    • Cast aluminum chassis, finished with textured epoxy paint
    • Keyed to prevent insertion in inappropriately rated rack positions
  • Circuit Breakers:
    • Fully magnetic to eliminate nuisance tripping
    • 20x inrush current rating
    • 125%, 10-120 seconds, must-trip rating
    • Rated for 100% switching duty applications
  • Ratings:
    • 100,000A Short Circuit Current Rating Rating (SCCR)
    • Modules withstand hot-patching of cold loads up to full rating
    • UL and cUL LISTED
  • Power Device:
    • Sealed, patented assembly
    • Field replaceable with screwdriver
    • Two back-to-back SCRs per circuit
    • One control LED per circuit
    • Integral bonded heatsink
    • Integral temperature sensor
  • Filtering:
    • High quality toroidal filters: 350µS risetime - Standard 100-120V modules
      * Risetime measured at full load, at worst case firing angle (90°), from 10-90% of output wave form
  • Dimmer Range:
    • Incandescent, low voltage dimming range 100-0%
    • Dimming range of 2 and 4-wire fluorescent ballast is dependent on lamp ballast combination. Contact ETC for range verification
    • Sizing of Neon transformer used in dimming applications should be 1.5x greater than size used in non-dimming application
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM