Similar Models

Radio Design Labs ST-VP2 [RESTOCK ITEM]
Automatic Ducking Module

OUR PART #  STVP2-RST-02


NOTE: This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

Radio Design Labs' ST-VP2 can be wired into any line-level input of a paging amplifier. A line-level music source may be provided from a receiver, satellite decoder, tape or CD source. A line-level voice source may be provided from a telephone paging system at line level, or from a microphone which has been preamplified up to line level (See RDL STM-1, STM-2, STM-2X, STM-3 Microphone Preamplifiers). When a page is initiated, the module automatically senses the audio at the input, turns the music down to the desired level, and automatically fades the music back up after the page is completed. The VOICE input is completely turned off by the module until the next paging signal is received. Setup is made easy by two LED indicators at the front of the module. LEDs are provided to show correct operating level for each of the two inputs.

The music input provides an AGC / Compressor which transparently produces a consistent audio level for varying music sources and protects against excessive music levels which would otherwise mask the voice signal during voice-overs.

NOTE: Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product. Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

RDL ST-VP2 Specifications:

  • Inputs (2): Balanced line level (or unbalanced)
  • Input Impedance: 20 kO
  • Input Signal Range: -20 dBu to +18 dBu
  • Output: 0 dBu balanced (into 600 O)
  • Gain: Adjustable using multiturn potentiometer
  • THD+N: < 0.02% (20 Hz to 20 kHz, no compression)
  • Frequency Response: 25 Hz to 20 kHz (± 1 dB)
  • Noise: < -70 dB
  • Indicators (2): 1 LED indicating proper music level 1LED indicating proper voice level
  • AGC/Compressor: 18 dB range; 6 dB compression atnormal input level
  • Attack Time: 25 ms
  • Release Time: 2.5 seconds
  • Voice Trigger Level: 24 dB below operating level
  • Music Fade Depth: Adjustable 0 dB to -25 dB, or off
  • Music Recovery Delay: Adjustable 2 seconds to 4seconds
  • Ambient Operating Environment: 0°C to 55°C
  • Power Requirement: GROUND-REFERENCED, 24 Vdc @ 35 mA
  • Package Type: Cardboard Box
  • Package Dimensions: 2" x 2" x 4"
  • Shipping Weight: 0.2 lbs.
  • WEEE weight: 0.145 lbs.
  • Tariff code: 8518.40.2000

Click to download

Radio Design Labs ST-VP2 [RESTOCK ITEM]
Automatic Ducking Module

OUR PART #  STVP2-RST-02

Product Information:

NOTE: This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

Radio Design Labs' ST-VP2 can be wired into any line-level input of a paging amplifier. A line-level music source may be provided from a receiver, satellite decoder, tape or CD source. A line-level voice source may be provided from a telephone paging system at line level, or from a microphone which has been preamplified up to line level (See RDL STM-1, STM-2, STM-2X, STM-3 Microphone Preamplifiers). When a page is initiated, the module automatically senses the audio at the input, turns the music down to the desired level, and automatically fades the music back up after the page is completed. The VOICE input is completely turned off by the module until the next paging signal is received. Setup is made easy by two LED indicators at the front of the module. LEDs are provided to show correct operating level for each of the two inputs.

The music input provides an AGC / Compressor which transparently produces a consistent audio level for varying music sources and protects against excessive music levels which would otherwise mask the voice signal during voice-overs.

NOTE: Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product. Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

RDL ST-VP2 Specifications:

  • Inputs (2): Balanced line level (or unbalanced)
  • Input Impedance: 20 kO
  • Input Signal Range: -20 dBu to +18 dBu
  • Output: 0 dBu balanced (into 600 O)
  • Gain: Adjustable using multiturn potentiometer
  • THD+N: < 0.02% (20 Hz to 20 kHz, no compression)
  • Frequency Response: 25 Hz to 20 kHz (± 1 dB)
  • Noise: < -70 dB
  • Indicators (2): 1 LED indicating proper music level 1LED indicating proper voice level
  • AGC/Compressor: 18 dB range; 6 dB compression atnormal input level
  • Attack Time: 25 ms
  • Release Time: 2.5 seconds
  • Voice Trigger Level: 24 dB below operating level
  • Music Fade Depth: Adjustable 0 dB to -25 dB, or off
  • Music Recovery Delay: Adjustable 2 seconds to 4seconds
  • Ambient Operating Environment: 0°C to 55°C
  • Power Requirement: GROUND-REFERENCED, 24 Vdc @ 35 mA
  • Package Type: Cardboard Box
  • Package Dimensions: 2" x 2" x 4"
  • Shipping Weight: 0.2 lbs.
  • WEEE weight: 0.145 lbs.
  • Tariff code: 8518.40.2000

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM