Audio Technologies Inc. DA416
Quad 1x4 Analog Distribution Amplifier

OUR PART #  ADA416


The ATI DA416 Quad Distribution Amplifier gives you uncompromised performance at a reasonable price. Available with four inputs, each input driving four individually adjustable, active balanced outputs, the ATI DA416 gives you twice the channels for the price—twice the performance in most applications. Need more outputs? Just parallel inputs for up to 1x16 operation. Drive everything from balanced 600 ohm lines to Hi-Z IHF phono jack inputs without matching pads or noise compromises. Audio is transparent and RF protected for use in hostile transmitter sites, on the road or in your studio.

ATI DA416 Features:

  • Sixteen balanced outputs divided among two or four independent 1-in-to-4-out channels
  • Parallel inputs on rear connectors for 1x8, 2x8 or 1x16 operation
  • Phoenix connectors provided for easy pre-wiring and flexible output channel assignment
  • Individual wide range audio taper output level controls smoothly adjust outputs from +8 to -10dBm with taper to full off
  • Separate LEDs for each 1X4 channel indicate either output clipping (standard) or input signal presence (-S models)

ATI DA416 Specifications:

  • Output Level: +24dBm into 600 ohm balanced loads
  • THD: .001% typical, 20Hz to 20kHz
  • IMD: .05% maximum
  • SMPTE measurement
  • SLEW RATE: 13 Volts per microsecond
  • Response: +/-. 25dB, 30Hz to 20kHz
  • Noise: -100dBm EIN 20Hz to 20kHz
  • Gain: 20dB maximum; each output has 40dB smooth adjustment range going to full off
  • Crosstalk: 70dB minimum at 1kHz
  • Output Impedance: 400 ohms balanced, 200 ohms single-ended, split and RF bypassed, AC coupled
  • Inputs: 30K ohm active balanced, split and RF bypassed; +22dBm maximum input level
  • Hum Rejection: 70dB CMR at 60Hz
  • Power: 115/230 VAC +10%, 47-63Hz, 12 VA
  • Dimensions (WxHxD): 19" x 1-3/4" x 7-1/2"
  • Weight: 5 lbs
  • Terminals: Euro style modular connectors
  • Warranty: Limited, One Year Warranty

Audio Technologies Inc. DA416
Quad 1x4 Analog Distribution Amplifier

OUR PART #  ADA416

Product Information:

The ATI DA416 Quad Distribution Amplifier gives you uncompromised performance at a reasonable price. Available with four inputs, each input driving four individually adjustable, active balanced outputs, the ATI DA416 gives you twice the channels for the price—twice the performance in most applications. Need more outputs? Just parallel inputs for up to 1x16 operation. Drive everything from balanced 600 ohm lines to Hi-Z IHF phono jack inputs without matching pads or noise compromises. Audio is transparent and RF protected for use in hostile transmitter sites, on the road or in your studio.

ATI DA416 Features:

  • Sixteen balanced outputs divided among two or four independent 1-in-to-4-out channels
  • Parallel inputs on rear connectors for 1x8, 2x8 or 1x16 operation
  • Phoenix connectors provided for easy pre-wiring and flexible output channel assignment
  • Individual wide range audio taper output level controls smoothly adjust outputs from +8 to -10dBm with taper to full off
  • Separate LEDs for each 1X4 channel indicate either output clipping (standard) or input signal presence (-S models)

ATI DA416 Specifications:

  • Output Level: +24dBm into 600 ohm balanced loads
  • THD: .001% typical, 20Hz to 20kHz
  • IMD: .05% maximum
  • SMPTE measurement
  • SLEW RATE: 13 Volts per microsecond
  • Response: +/-. 25dB, 30Hz to 20kHz
  • Noise: -100dBm EIN 20Hz to 20kHz
  • Gain: 20dB maximum; each output has 40dB smooth adjustment range going to full off
  • Crosstalk: 70dB minimum at 1kHz
  • Output Impedance: 400 ohms balanced, 200 ohms single-ended, split and RF bypassed, AC coupled
  • Inputs: 30K ohm active balanced, split and RF bypassed; +22dBm maximum input level
  • Hum Rejection: 70dB CMR at 60Hz
  • Power: 115/230 VAC +10%, 47-63Hz, 12 VA
  • Dimensions (WxHxD): 19" x 1-3/4" x 7-1/2"
  • Weight: 5 lbs
  • Terminals: Euro style modular connectors
  • Warranty: Limited, One Year Warranty
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM