M-Audio BX5-D3
5" Powered Studio Reference Monitor

OUR PART #  BX5-D3


The M-Audio BX5-D3 is a 5" powered studio reference monitor. Driving the low-end and midrange, BX5-D3’s 5-inch military-grade Kevlar® woofers are rigid and lightweight, delivering outstanding transient response whist negating unwanted “cone breakup.” BX5- D3’s treated silk dome tweeter provides the perfect combination of low mass and the absence of audible resonances that plague conventional tweeters. Together, the BX drivers deliver critical detail, nuance and dynamic accuracy, so your mixes have the veracity and transparency you demand.

M-Audio BX5-D3 Features:

  • Bi-amplified design with 100 watts (60 LF, 40 HF) for powerful, accurate sound
  • 5” Kevlar low-frequency driver with high-temp voicecoil and damped rubber surround
  • 1” natural silk dome tweeter delivers superb transient details
  • New computer-optimized tweeter waveguide for precise imaging
  • Acoustic Space Control to fine-tune low-end response to your room
  • Optimized rear port for extended low-frequency response
  • XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
  • Volume control enables you to dial in the perfect monitor playback level
  • Ultra-wide range 52-35kHz frequency response covers full musical spectrum
  • Front panel LED shines brightly when speaker is positioned at ideal monitor angle

M-Audio BX5-D3 Specifications:

  • Type: 2-way near-field studio reference monitors
  • Low Freq. Driver: 5 inch (127mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
  • High Freq. Driver: 1 inch (25mm) magnetically shielded natural silk dome
  • Frequency Response: 52 Hz – 35 kHz
  • Crossover Frequency: 2.5kHz
  • Low Freq. Amplifier Power: 60W
  • High Freq. Amplifier Power: 40W
  • Maximum Peak SPL: 110 dB SPL - Full Bandwidth Pink Noise Measured
  • Input Sensitivity: -10dBU
  • Input Connectors: 1x XLR balanced input connector 1xTRS balanced/unbalanced input connector
  • Input Impedance: 10kO balanced, 20kO unbalanced
  • Polarity: Positive signal at + input produce outward LF cone displacement
  • Protection: RF interference, output current limiting,over temperature, turn on/off transient, subsonic filter, external mains fuse
  • Power: Voltage: 100–120V, 50/60 Hz / 220–240V, 50/60Hz Consumption: 100W
  • Fuse: 220–240V~ T1AL 250V / 100–120V~ T1.6AL 250V
  • Cabinet: Vinyl-laminated high-acoustic-efficiency MDF
  • Dimensions (width x depth x height): 6.9” x 7.8” x10” (176 x 197 x 254 mm)
  • Weight: 12.3 lbs (5.6kg)

M-Audio BX5-D3
5" Powered Studio Reference Monitor

OUR PART #  BX5-D3

Product Information:

The M-Audio BX5-D3 is a 5" powered studio reference monitor. Driving the low-end and midrange, BX5-D3’s 5-inch military-grade Kevlar® woofers are rigid and lightweight, delivering outstanding transient response whist negating unwanted “cone breakup.” BX5- D3’s treated silk dome tweeter provides the perfect combination of low mass and the absence of audible resonances that plague conventional tweeters. Together, the BX drivers deliver critical detail, nuance and dynamic accuracy, so your mixes have the veracity and transparency you demand.

M-Audio BX5-D3 Features:

  • Bi-amplified design with 100 watts (60 LF, 40 HF) for powerful, accurate sound
  • 5” Kevlar low-frequency driver with high-temp voicecoil and damped rubber surround
  • 1” natural silk dome tweeter delivers superb transient details
  • New computer-optimized tweeter waveguide for precise imaging
  • Acoustic Space Control to fine-tune low-end response to your room
  • Optimized rear port for extended low-frequency response
  • XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
  • Volume control enables you to dial in the perfect monitor playback level
  • Ultra-wide range 52-35kHz frequency response covers full musical spectrum
  • Front panel LED shines brightly when speaker is positioned at ideal monitor angle

M-Audio BX5-D3 Specifications:

  • Type: 2-way near-field studio reference monitors
  • Low Freq. Driver: 5 inch (127mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded
  • High Freq. Driver: 1 inch (25mm) magnetically shielded natural silk dome
  • Frequency Response: 52 Hz – 35 kHz
  • Crossover Frequency: 2.5kHz
  • Low Freq. Amplifier Power: 60W
  • High Freq. Amplifier Power: 40W
  • Maximum Peak SPL: 110 dB SPL - Full Bandwidth Pink Noise Measured
  • Input Sensitivity: -10dBU
  • Input Connectors: 1x XLR balanced input connector 1xTRS balanced/unbalanced input connector
  • Input Impedance: 10kO balanced, 20kO unbalanced
  • Polarity: Positive signal at + input produce outward LF cone displacement
  • Protection: RF interference, output current limiting,over temperature, turn on/off transient, subsonic filter, external mains fuse
  • Power: Voltage: 100–120V, 50/60 Hz / 220–240V, 50/60Hz Consumption: 100W
  • Fuse: 220–240V~ T1AL 250V / 100–120V~ T1.6AL 250V
  • Cabinet: Vinyl-laminated high-acoustic-efficiency MDF
  • Dimensions (width x depth x height): 6.9” x 7.8” x10” (176 x 197 x 254 mm)
  • Weight: 12.3 lbs (5.6kg)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM