M-Audio BX8-D3
8" Powered Studio Reference Monitor

OUR PART #  BX8-D3


The M-Audio BX8-D3 is an 8" powered sutdio reference monitor. Driving the low-end and midrange, BX8-D3’s 8-inch military-grade Kevlar® woofers are rigid and lightweight, delivering outstanding transient response whist negating unwanted “cone breakup.” BX8- D3’s treated silk dome tweeter provides the perfect combination of low mass and the absence of audible resonances that plague conventional tweeters. Together, the BX drivers deliver critical detail, nuance and dynamic accuracy, so your mixes have the veracity and transparency you demand.

M-Audio BX8-D3 Features:

  • Bi-amplified design with 150 watts (80 LF, 70 HF) for powerful, accurate sound
  • 8” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
  • 1.25” natural silk dome tweeter delivers superb transient details
  • Computer-optimized tweeter waveguide for precise imaging
  • Acoustic Space Control to fine-tune low-end response to your room
  • Optimized rear port for extended low-frequency response
  • XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
  • Volume control enables you to dial in the perfect monitor playback level
  • Wide range 37-22kHz frequency response covers full musical spectrum

M-Audio BX8-D3 Specifications:

  • Type: 2-way near-field studio reference monitors
  • Low Freq. Driver: 8 inch (203 mm) Kevlar curved conewith high temperature voice coil and damped rubber surround, magneticallyshielded
  • High Freq. Driver: 1.25 inch (32mm) magneticallyshielded natural silk dome
  • Frequency Response: 37Hz – 22kHz
  • Crossover Frequency: 2.0kHz
  • Low Freq. Amplifier Power: 80W
  • High Freq. Amplifier Power: 70W
  • Maximum Peak SPL: 114dB SPL - Full Bandwidth PinkNoise Measured
  • Input Sensitivity: -12dBU
  • Input Connectors: 1x XLR balanced input connector 1xTRS balanced/unbalanced input connector
  • Input Impedance: 10 kOhm balanced, 20 kOhm unbalanced
  • Polarity: Positive signal at + input produce outwardLF cone displacement
  • Protection: RF interference, output current limiting,over temperature, turn on/off transient, subsonic filter, external mains fuse
  • Power: Voltage: 100–120V, 50/60 Hz / 220–240V, 50/60Hz Consumption: 150W
  • Fuse: 220–240V~ T1AL, 250V / 100–120V~ T2AL, 250V
  • Cabinet: Vinyl-laminated high-acoustic-efficiency MDF
  • Dimensions (width x depth x height): 9.8 x 11.” x15.1” (250 x 302 x 384 mm)
  • Weight: 23.1 lb (10.5 kg)

M-Audio BX8-D3
8" Powered Studio Reference Monitor

OUR PART #  BX8-D3

Product Information:

The M-Audio BX8-D3 is an 8" powered sutdio reference monitor. Driving the low-end and midrange, BX8-D3’s 8-inch military-grade Kevlar® woofers are rigid and lightweight, delivering outstanding transient response whist negating unwanted “cone breakup.” BX8- D3’s treated silk dome tweeter provides the perfect combination of low mass and the absence of audible resonances that plague conventional tweeters. Together, the BX drivers deliver critical detail, nuance and dynamic accuracy, so your mixes have the veracity and transparency you demand.

M-Audio BX8-D3 Features:

  • Bi-amplified design with 150 watts (80 LF, 70 HF) for powerful, accurate sound
  • 8” Kevlar low-frequency driver with high-temp voice coil and damped rubber surround
  • 1.25” natural silk dome tweeter delivers superb transient details
  • Computer-optimized tweeter waveguide for precise imaging
  • Acoustic Space Control to fine-tune low-end response to your room
  • Optimized rear port for extended low-frequency response
  • XLR balanced and 1/4” balanced/unbalanced inputs for connecting audio interfaces, mixers, synthesizers, DJ gear, and more
  • Volume control enables you to dial in the perfect monitor playback level
  • Wide range 37-22kHz frequency response covers full musical spectrum

M-Audio BX8-D3 Specifications:

  • Type: 2-way near-field studio reference monitors
  • Low Freq. Driver: 8 inch (203 mm) Kevlar curved conewith high temperature voice coil and damped rubber surround, magneticallyshielded
  • High Freq. Driver: 1.25 inch (32mm) magneticallyshielded natural silk dome
  • Frequency Response: 37Hz – 22kHz
  • Crossover Frequency: 2.0kHz
  • Low Freq. Amplifier Power: 80W
  • High Freq. Amplifier Power: 70W
  • Maximum Peak SPL: 114dB SPL - Full Bandwidth PinkNoise Measured
  • Input Sensitivity: -12dBU
  • Input Connectors: 1x XLR balanced input connector 1xTRS balanced/unbalanced input connector
  • Input Impedance: 10 kOhm balanced, 20 kOhm unbalanced
  • Polarity: Positive signal at + input produce outwardLF cone displacement
  • Protection: RF interference, output current limiting,over temperature, turn on/off transient, subsonic filter, external mains fuse
  • Power: Voltage: 100–120V, 50/60 Hz / 220–240V, 50/60Hz Consumption: 150W
  • Fuse: 220–240V~ T1AL, 250V / 100–120V~ T2AL, 250V
  • Cabinet: Vinyl-laminated high-acoustic-efficiency MDF
  • Dimensions (width x depth x height): 9.8 x 11.” x15.1” (250 x 302 x 384 mm)
  • Weight: 23.1 lb (10.5 kg)
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM