Intelix DL-HD70LS
Slim HDMI Over Twisted Pair 70m HDBaseT Complete Set

OUR PART #  DL-HD70LS


The Intelix DL-HD70LS is a slim HDMI over twisted pair 70M HDBaseT complete set extender with power and IR extension.

The DigitaLinx DL-HD70LS extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D), including HDCP 2.2, and bidirectional IR up to 70 meters away using a single solid core, shielded Category 5e twisted pair cable. Built-in surge protection helps ensure hassle-free and robust installations. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected. The DL-HD70LS is sold only as a set. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.

Applications:

  • Extension of HDMI and control signals
  • Limited access to power for extenders on both ends
  • Ideal for Digital Signage, Home Theater

Intelix DL-HD70LS Includes:

  • Installation Guide
  • Power supply
  • US power cord
  • Mounting “L” brackets (4 ea)
  • Mounting screws (4 ea)
  • IR Transmitter: DIGIB-EMT
  • IR Receiver: DIGIB-EYE, IR-AC

Intelix DL-HD70LS Features:

  • HDMI transmission up to 230 feet (70m)
  • Complete set Includes TX, RX, Power Supply, and IR flasher/emitter
  • 1080p, 4Kx2K & 3D compatible; CEC supported
  • Built-in surge protection; diagnostic LEDs
  • HDCP 2.2 compliant
  • Bidirectional Wideband IR
  • Power from TX supplies RX
  • Locking power connector (power supply included)

Intelix DL-HD70LS Specifications:

  • Product Line: DL-HD70LS
  • I/O Connections:
    • HDMI: One (1) HDMI Type A Receptacle
    • Twisted Pair: One (1) 8P8C port (Shielded RJ45)
    • IR Input: One (1) 3.5mm TRS Jack
    • IR Output: One (1) 3.5mm TS Jack
    • 12V DC Power: One (1) 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel (Locking)
  • Supported Audio and Video:
    • Maximum Video Compatibility:
      • 70 m: Deep Color 36/30/24 Bit at 1080p
      • 40 m: Deep Color 48 Bit at 1080p, 3D, and 4k x 2k (UHD) up to 30 Hz: RGB, YCbCr 4:4:4, YCbCr         4:2:2; up to 60 Hz: YCbCr 4:2:0
    • Video Compliance: HDMI, HDCP 1.3 through 2.2, and CEC (Consumer Electronics Control)
    • Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
    • Input DDC Signal: 5.0 volts p-p (TTL)
    • Input Video Signal: 0.5 to 1.0 volts p-p
    • IR Carrier Frequency Range: 33-55kHz at 5 volts
  • HDBaseT Signal Characteristics:
    • Maximum Distance: 70 m
    • Cable Requirements: Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
    • Bandwidth: 10.2 Gbps
    • Gain: 0 dB – 10 dB at 100 MHz
    • Signal to Noise Ratio (SNR): > 70 dB at 100 MHz over 100 m
    • Return Loss: < -30 dB at 5 KHz
    • Total Harmonic Distortion (THD): < 0.005% at 1 KHz
    • Min-Max Signal Level: < 0.3 V – 1.45 Vp-p
    • Differential Phase Error: ±10° at 135 MHz over 100 m
  • Chassis and Environmental:
    • Enclosure: Painted aluminum
    • Dimensions: 0.71" x 4.72" x 2.91" (18 x 120 x 74 mm)
    • Shipping Weight: 1.8 lbs. (0.82 kg)
    • Operating Temperature:
      • Environment: +32° to +104°F (0° to +40°C)
      • Chassis: 88°F (31°C) (S); 100°F (38°C) (R)
    • Operating Humidity (Environment): 20% to 90%, Non-condensing
    • Storage Temperature (Environment): +14° to +140°F (-10° to +60°C)
    • Storage Humidity (Environment): 20% to 90%, Non-condensing
  • Power, ESD, and Regulatory:
    • Maximum Power Consumption: 3 watts (S), 6 watts (R)
    • Power Supply: 12V DC
    • ESD Protection: 15kV
    • Regulatory: CE, RoHS
  • Other:
    • Standard Warranty: 2 Years
    • Diagnostic Indicators: Power, Status, Link, and HDCP LEDs

Intelix DL-HD70LS
Slim HDMI Over Twisted Pair 70m HDBaseT Complete Set

OUR PART #  DL-HD70LS

Product Information:

The Intelix DL-HD70LS is a slim HDMI over twisted pair 70M HDBaseT complete set extender with power and IR extension.

The DigitaLinx DL-HD70LS extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D), including HDCP 2.2, and bidirectional IR up to 70 meters away using a single solid core, shielded Category 5e twisted pair cable. Built-in surge protection helps ensure hassle-free and robust installations. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected. The DL-HD70LS is sold only as a set. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.

Applications:

  • Extension of HDMI and control signals
  • Limited access to power for extenders on both ends
  • Ideal for Digital Signage, Home Theater

Intelix DL-HD70LS Includes:

  • Installation Guide
  • Power supply
  • US power cord
  • Mounting “L” brackets (4 ea)
  • Mounting screws (4 ea)
  • IR Transmitter: DIGIB-EMT
  • IR Receiver: DIGIB-EYE, IR-AC

Intelix DL-HD70LS Features:

  • HDMI transmission up to 230 feet (70m)
  • Complete set Includes TX, RX, Power Supply, and IR flasher/emitter
  • 1080p, 4Kx2K & 3D compatible; CEC supported
  • Built-in surge protection; diagnostic LEDs
  • HDCP 2.2 compliant
  • Bidirectional Wideband IR
  • Power from TX supplies RX
  • Locking power connector (power supply included)

Intelix DL-HD70LS Specifications:

  • Product Line: DL-HD70LS
  • I/O Connections:
    • HDMI: One (1) HDMI Type A Receptacle
    • Twisted Pair: One (1) 8P8C port (Shielded RJ45)
    • IR Input: One (1) 3.5mm TRS Jack
    • IR Output: One (1) 3.5mm TS Jack
    • 12V DC Power: One (1) 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel (Locking)
  • Supported Audio and Video:
    • Maximum Video Compatibility:
      • 70 m: Deep Color 36/30/24 Bit at 1080p
      • 40 m: Deep Color 48 Bit at 1080p, 3D, and 4k x 2k (UHD) up to 30 Hz: RGB, YCbCr 4:4:4, YCbCr         4:2:2; up to 60 Hz: YCbCr 4:2:0
    • Video Compliance: HDMI, HDCP 1.3 through 2.2, and CEC (Consumer Electronics Control)
    • Embedded Audio: Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
    • Input DDC Signal: 5.0 volts p-p (TTL)
    • Input Video Signal: 0.5 to 1.0 volts p-p
    • IR Carrier Frequency Range: 33-55kHz at 5 volts
  • HDBaseT Signal Characteristics:
    • Maximum Distance: 70 m
    • Cable Requirements: Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
    • Bandwidth: 10.2 Gbps
    • Gain: 0 dB – 10 dB at 100 MHz
    • Signal to Noise Ratio (SNR): > 70 dB at 100 MHz over 100 m
    • Return Loss: < -30 dB at 5 KHz
    • Total Harmonic Distortion (THD): < 0.005% at 1 KHz
    • Min-Max Signal Level: < 0.3 V – 1.45 Vp-p
    • Differential Phase Error: ±10° at 135 MHz over 100 m
  • Chassis and Environmental:
    • Enclosure: Painted aluminum
    • Dimensions: 0.71" x 4.72" x 2.91" (18 x 120 x 74 mm)
    • Shipping Weight: 1.8 lbs. (0.82 kg)
    • Operating Temperature:
      • Environment: +32° to +104°F (0° to +40°C)
      • Chassis: 88°F (31°C) (S); 100°F (38°C) (R)
    • Operating Humidity (Environment): 20% to 90%, Non-condensing
    • Storage Temperature (Environment): +14° to +140°F (-10° to +60°C)
    • Storage Humidity (Environment): 20% to 90%, Non-condensing
  • Power, ESD, and Regulatory:
    • Maximum Power Consumption: 3 watts (S), 6 watts (R)
    • Power Supply: 12V DC
    • ESD Protection: 15kV
    • Regulatory: CE, RoHS
  • Other:
    • Standard Warranty: 2 Years
    • Diagnostic Indicators: Power, Status, Link, and HDCP LEDs
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM