Peavey PVXP15-DSP
Monitor Floor 2 Way 15" Powered with DSP

OUR PART #  PVXP15-DSP


The Peavey PVXp™ 15 DSP features a reliable bi-amped power section that provides a total of 830 Watts of peak available dynamic power. With that much available power, speaker protection is critical. Advanced digital signal compression prevents audible overload, protecting the speakers from harmful distortion at high output levels. This powered enclosure also includes heavy duty speaker drivers; it features a 15" woofer with a 2-3/8" voice coil and a 50 oz. magnet. This is coupled with the RX14 compression driver that includes a 1.4" titanium diaphragm on a 100-degree horizontal x 50 degree vertical pattern asymmetrical horn.

The PVXp™ 15 DSP provides a balanced input via a combination jack that accepts a balanced TRS 1/4" input, as well as a balanced XLR input and summed RCA jacks. There are two balanced Thru outputs, a male XLR and a 1/4" TRS. The LCD display and EQ presets, along with other operating parameters are accessed via a one-knob selector.

Peavey PVXP15-DSP Features:

  • Two-way bi-amplified analog amp powered speaker system
  • DSP I/O is at 48 kHz and 24 bits, with low-jitter, professional grade components
  • Fan cooled for maximum reliability
  • Peavey Exclusive Quadratic Throat Waveguide™ technology, 100° by 50° coverage
  • DSP processing is 64 bit double-precision
  • Input is via a combo female XLR and 1/4" TRS phone jack with balanced input
  • A Mic/Line switch provides for two different gain settings
  • Thru output is via a male XLR jack and 1/4" TRS phone jack
  • Multiple Factory Preset EQ settings
  • Rugged plastic injection-molded trapezoidal enclosure
  • 630 watts peak dynamic woofer power, 200 watts peak dynamic tweeter power
  • Full-coverage perforated steel grille, with powder coat finish
  • RX™ 14 compression driver, with 1.4" titanium diaphragm
  • Pole mount molded-in for 1 3/8" diameter poles
  • 15" heavy-duty woofer with a 2-3/8" voice coil & 50 oz. magnet
  • Top, bottom and right side flying point inserts
  • Asymmetrical horn aims the sound down 10°, at the audience, not over their heads
  • Weight Unpacked: 52.00 lb(23.587 kg)
  • Weight Packed: 58.00 lb(26.308 kg)
for Mounting VM 70 to PVX or PVXp
Peavey PVX/VM 70/Versamount 70 Mounting Bolt Kit for Mounting VM 70 to PVX or PVXp
This mounting bolt kit from Peavey (part no. 03016290) allows for the VM 70 bracket to be mounted to a PVX™ or PVXp™ loudspeaker. Includes four required metric bolts and washers.

Usually ships in 7-14 business days.
Need it sooner? Call us!

Peavey PVXP15-DSP
Monitor Floor 2 Way 15" Powered with DSP

OUR PART #  PVXP15-DSP

Product Information:

The Peavey PVXp™ 15 DSP features a reliable bi-amped power section that provides a total of 830 Watts of peak available dynamic power. With that much available power, speaker protection is critical. Advanced digital signal compression prevents audible overload, protecting the speakers from harmful distortion at high output levels. This powered enclosure also includes heavy duty speaker drivers; it features a 15" woofer with a 2-3/8" voice coil and a 50 oz. magnet. This is coupled with the RX14 compression driver that includes a 1.4" titanium diaphragm on a 100-degree horizontal x 50 degree vertical pattern asymmetrical horn.

The PVXp™ 15 DSP provides a balanced input via a combination jack that accepts a balanced TRS 1/4" input, as well as a balanced XLR input and summed RCA jacks. There are two balanced Thru outputs, a male XLR and a 1/4" TRS. The LCD display and EQ presets, along with other operating parameters are accessed via a one-knob selector.

Peavey PVXP15-DSP Features:

  • Two-way bi-amplified analog amp powered speaker system
  • DSP I/O is at 48 kHz and 24 bits, with low-jitter, professional grade components
  • Fan cooled for maximum reliability
  • Peavey Exclusive Quadratic Throat Waveguide™ technology, 100° by 50° coverage
  • DSP processing is 64 bit double-precision
  • Input is via a combo female XLR and 1/4" TRS phone jack with balanced input
  • A Mic/Line switch provides for two different gain settings
  • Thru output is via a male XLR jack and 1/4" TRS phone jack
  • Multiple Factory Preset EQ settings
  • Rugged plastic injection-molded trapezoidal enclosure
  • 630 watts peak dynamic woofer power, 200 watts peak dynamic tweeter power
  • Full-coverage perforated steel grille, with powder coat finish
  • RX™ 14 compression driver, with 1.4" titanium diaphragm
  • Pole mount molded-in for 1 3/8" diameter poles
  • 15" heavy-duty woofer with a 2-3/8" voice coil & 50 oz. magnet
  • Top, bottom and right side flying point inserts
  • Asymmetrical horn aims the sound down 10°, at the audience, not over their heads
  • Weight Unpacked: 52.00 lb(23.587 kg)
  • Weight Packed: 58.00 lb(26.308 kg)
for Mounting VM 70 to PVX or PVXp
Peavey PVX/VM 70/Versamount 70 Mounting Bolt Kit for Mounting VM 70 to PVX or PVXp
This mounting bolt kit from Peavey (part no. 03016290) allows for the VM 70 bracket to be mounted to a PVX™ or PVXp™ loudspeaker. Includes four required metric bolts and washers.

Usually ships in 7-14 business days.
Need it sooner? Call us!
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM