Teradek Bolt 500
HDMI Video Transceiver Set

OUR PART #  BOLT-500


The Teradek Bolt 500 HDMI Video Transceiver Set includes one transmitter and one receiver.

With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (one Transmitter can multicast up to four Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included.

Teradek Bolt 500 Includes:

  • General:
    • (2) HDMI 18 inch Cable (Type A to Type A)
  • Transmitter:
    • (1) 2-pin Connector to PowerTap 18" Cable
    • (1)  Hot Shoe Adapter (1/4"-20")
    • (1) x HDMI 18" Cable (Type A to Type A)
  • Receiver:
    • (1) Thumb Screw 1.25" length (1/4"-20")
    • (1) Lightstand Adapter (1/4"-20")
    • (1) SDI (BNC to BNC) Cable 10"
    • (1) USB 3.0 Cable A to Micro B (3ft Length)
    • (1) PSU 2-Pin Connector to 18W AC Adapter 6ft cable
    • 1-Year Warranty

Teradek Bolt 500 Features:

  • Longer Range: Transmit visually lossless video up to 500ft with no delay
  • 2 New DFS Channels: Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels
  • More Robust Than Ever Before: Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created
  • Rapid Reconnection: Reconnect times during a dropped link are now instantaneous once you move back into range
  • Built-In HDMI to SDI Converter: Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device

Teradek BOLT-500 Specifications:

  • Bolt Pro 500 3G-SDI Video TX Specifications:
    • Video Inputs: 1 x SD/HD/3G-SDI (75 Ohm BNC)
    • Video Outputs: 1 x HD/SD/3G-SDI Loop-out (75 Ohm BNC)
    • Sdi Ancillary Data Support: Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers
    • Color Sampling: SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
    • Delay Tx To Rx: <0.001sec (when no video format conversion is enabled)
    • Supported Resolutions:
      • 1080p 23.98/24/25/29.97/30/50/59.94/60
      • 1080psf23.98/24/25/29.97/30
      • 1080i50/59.94/60
      • 720p50/59.94/60
      • 480p59.94/576p50 (via HDMI ports only)
      • 480i(NTSC)/576i(PAL)
    • Video Compression: visually lossless
    • Color Correction:
      • CDL/1024 1D LUT (supports 10-bit color)
      • 33x33x33 3D LUT (supports 10-bit color)
    • Audio Compression: 48kHz 24-bit PCM
    • Audio Input: Embedded Audio I
    • Physical:
      • Dimensions: 1" x 2.6" x 4.0" (24 x 66 x 102.1mm)
      • Weight: 7.6oz (217g)
      • Construction:
        • Milled Aluminum (Chassis) and regulation-compliant PCB
        • Plastic Cap
    • Power Input: 2-Pin Connector 7-28 VDC
    • Nominal Power Consumption: 7.3 Watts (Measured at 1080p60)
    • Operating Temperature: 0° ~ 40°C
  • Bolt Pro 500 RX - 3G-SDI/HDMI Video RX Specifications:
    • Video Outputs:
      • 1 x SD/HD/3G-SDI (75 Ohm BNC)
      • 1 x HDMI Type-A receptacle
      • 1 x USB 3.0 micro B receptacle
    • Sdi Ancillary Data Support: Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers
    • Color Sampling:
      • SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
      • HDMI: RGB 4:4:4, 8-bit
    • Delay Tx To Rx: <0.001sec (when no video format conversion is enabled)
    • Dimensions: 1.0" x 3.5" x 5.8" (25.2 x 88.9 x 146.5mm)
    • Weight: 10.5oz (299g)
    • Construction: 
      • Milled Aluminum (Chassis) and regulation-compliant PCB
      • Plastic Cap
    • Power Input: 2-Pin Connector 7-28 VDC
    • Battery: None
    • Nominal Power Consumption: 9 Watts (Measured at 1080p60)
    • Operating Temperature: 0° ~ 40°C
  • Mountability: Multiple mounting options with 1/4" holes

Teradek Bolt 500
HDMI Video Transceiver Set

OUR PART #  BOLT-500

Product Information:

The Teradek Bolt 500 HDMI Video Transceiver Set includes one transmitter and one receiver.

With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (one Transmitter can multicast up to four Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included.

Teradek Bolt 500 Includes:

  • General:
    • (2) HDMI 18 inch Cable (Type A to Type A)
  • Transmitter:
    • (1) 2-pin Connector to PowerTap 18" Cable
    • (1)  Hot Shoe Adapter (1/4"-20")
    • (1) x HDMI 18" Cable (Type A to Type A)
  • Receiver:
    • (1) Thumb Screw 1.25" length (1/4"-20")
    • (1) Lightstand Adapter (1/4"-20")
    • (1) SDI (BNC to BNC) Cable 10"
    • (1) USB 3.0 Cable A to Micro B (3ft Length)
    • (1) PSU 2-Pin Connector to 18W AC Adapter 6ft cable
    • 1-Year Warranty

Teradek Bolt 500 Features:

  • Longer Range: Transmit visually lossless video up to 500ft with no delay
  • 2 New DFS Channels: Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels
  • More Robust Than Ever Before: Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created
  • Rapid Reconnection: Reconnect times during a dropped link are now instantaneous once you move back into range
  • Built-In HDMI to SDI Converter: Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device

Teradek BOLT-500 Specifications:

  • Bolt Pro 500 3G-SDI Video TX Specifications:
    • Video Inputs: 1 x SD/HD/3G-SDI (75 Ohm BNC)
    • Video Outputs: 1 x HD/SD/3G-SDI Loop-out (75 Ohm BNC)
    • Sdi Ancillary Data Support: Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers
    • Color Sampling: SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
    • Delay Tx To Rx: <0.001sec (when no video format conversion is enabled)
    • Supported Resolutions:
      • 1080p 23.98/24/25/29.97/30/50/59.94/60
      • 1080psf23.98/24/25/29.97/30
      • 1080i50/59.94/60
      • 720p50/59.94/60
      • 480p59.94/576p50 (via HDMI ports only)
      • 480i(NTSC)/576i(PAL)
    • Video Compression: visually lossless
    • Color Correction:
      • CDL/1024 1D LUT (supports 10-bit color)
      • 33x33x33 3D LUT (supports 10-bit color)
    • Audio Compression: 48kHz 24-bit PCM
    • Audio Input: Embedded Audio I
    • Physical:
      • Dimensions: 1" x 2.6" x 4.0" (24 x 66 x 102.1mm)
      • Weight: 7.6oz (217g)
      • Construction:
        • Milled Aluminum (Chassis) and regulation-compliant PCB
        • Plastic Cap
    • Power Input: 2-Pin Connector 7-28 VDC
    • Nominal Power Consumption: 7.3 Watts (Measured at 1080p60)
    • Operating Temperature: 0° ~ 40°C
  • Bolt Pro 500 RX - 3G-SDI/HDMI Video RX Specifications:
    • Video Outputs:
      • 1 x SD/HD/3G-SDI (75 Ohm BNC)
      • 1 x HDMI Type-A receptacle
      • 1 x USB 3.0 micro B receptacle
    • Sdi Ancillary Data Support: Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers
    • Color Sampling:
      • SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
      • HDMI: RGB 4:4:4, 8-bit
    • Delay Tx To Rx: <0.001sec (when no video format conversion is enabled)
    • Dimensions: 1.0" x 3.5" x 5.8" (25.2 x 88.9 x 146.5mm)
    • Weight: 10.5oz (299g)
    • Construction: 
      • Milled Aluminum (Chassis) and regulation-compliant PCB
      • Plastic Cap
    • Power Input: 2-Pin Connector 7-28 VDC
    • Battery: None
    • Nominal Power Consumption: 9 Watts (Measured at 1080p60)
    • Operating Temperature: 0° ~ 40°C
  • Mountability: Multiple mounting options with 1/4" holes
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM