Nigel B Design NB-UIM-W-25
MK2 Isolation Mount for 21-32 lb Loads, White

OUR PART #  NB-UIM-W-25


NOTE: The image is for illustrative purposes only. Actual isolation mount comes in white.

Nigel B Design's MB-UIM-W-25 is a pole-mounted solution that easily isolates and protects projectors or other sensitive equipment from vibrations generated from any external source.

Absorbing the source of vibration is achieved using a combination of vibration absorbing grommets and specially engineered rubber compound isolating elements. Each mount consists of four engineered isolation elements and two intermediate plates. The intermediate plates are fitted with eight damping grommets that absorb unwanted vibration that's often generated from HAVC units that are usually mounted on the same steelwork as the projectors. This combination of damping grommets and isolation elements prevents this vibration being transferred to the projector itself.

Each isolation mount must be matched to each system's weight. It is important therefore, when ordering an isolation mount, to add the weight of the projector mount, the projector itself and any projector pole that will be installed below the isolation mount.

Can be easily installed in many other hanging applications as well. In projector installations, the isolation mount is placed just above the projector between two lengths of ordinary 1-1/2" diameter projector pipe. Smaller than the projector itself, its 4" x 4" footprint will not be noticeable.

Nigel B Design NB-UIM-W-25
MK2 Isolation Mount for 21-32 lb Loads, White

OUR PART #  NB-UIM-W-25

Product Information:

NOTE: The image is for illustrative purposes only. Actual isolation mount comes in white.

Nigel B Design's MB-UIM-W-25 is a pole-mounted solution that easily isolates and protects projectors or other sensitive equipment from vibrations generated from any external source.

Absorbing the source of vibration is achieved using a combination of vibration absorbing grommets and specially engineered rubber compound isolating elements. Each mount consists of four engineered isolation elements and two intermediate plates. The intermediate plates are fitted with eight damping grommets that absorb unwanted vibration that's often generated from HAVC units that are usually mounted on the same steelwork as the projectors. This combination of damping grommets and isolation elements prevents this vibration being transferred to the projector itself.

Each isolation mount must be matched to each system's weight. It is important therefore, when ordering an isolation mount, to add the weight of the projector mount, the projector itself and any projector pole that will be installed below the isolation mount.

Can be easily installed in many other hanging applications as well. In projector installations, the isolation mount is placed just above the projector between two lengths of ordinary 1-1/2" diameter projector pipe. Smaller than the projector itself, its 4" x 4" footprint will not be noticeable.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM