Radio Design Labs TX-J2 [RESTOCK ITEM]
Unbalanced Input Transformer - Sums Unbalanced Stereo Inputs to Balanced Mono Out

OUR PART #  TXJ2-RST-01

Log In for price!

Don't have an account? Apply today!

NOTE: This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

An unbalanced input transformer with unbalanced stereo inputs to summed balanced mono output, the RDL TX-J2 is the ideal choice for installations that require the passive mixing of 2 unbalanced line-level audio sources to feed a balanced (or unbalanced) audio output. It's a complete unbalanced line-level audio input module with a front panel that features 2 gold-plated phono jacks, intended for mono or stereo consumer level sources. Inputs 1 and 2 are combined and balanced through audio transformers configured to reject induced hum. The line-level output is provided on the front-panel detachable terminal block for connection to 10 kOhms or higher input impedance line-level module or equipment inputs.

NOTE: The TX-J2 is a passive module that does not add gain to the consumer level input. Therefore the balanced output level from the module is not a standard +4 dBu. For installations where a +4 dBu balanced line-level is required, or if the input level is particularly low, RDL's TX-LC2 is recommended. Contact your Sales Pro for more details.

Choose the TX-J2 wherever consumer format audio signals need to be converted to a balanced line without gain. Use it individually or in concert with other RDL products as part of a complete audio/video system.

Typical application diagram (added amplifiers and stereo equipment shown are sold separately):

http://www.rdlnet.com/i/product_images_large/tx-j2_drawing.jpg

RDL TX-J2 Features:

  • Mix 2 unbalanced audio signals to mono balanced
  • Combine stereo into mono with balanced output
  • Unbalanced to balanced conversion without gain
  • Hum cancellation on unbalanced line inputs
  • Frequency response: 30 Hz to 20 kHz (+/- 1 dB)

RDL TX-J2 Specifications:

  • Ambient Operating Temperature: 0° C to 55° C
  • Package Type: Cardboard Box
  • Package Dimensions: 2" x 2" x 4"
  • Shipping Weight: 0.335 lbs
  • Product Dimensional Illustration (inches/cm):

TX-J2

Mounting Kit for STICK-ON, TX, or Rack-Up module
Radio Design Labs MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module
Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.
Mounting Frame for Stick/TX
Radio Design Labs SR-4 Mounting Frame for Stick/TX
Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Pole Mount Tray for RDL Module
Radio Design Labs PM-1T Pole Mount Tray for RDL Module
The PM-1T is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller round or rectangular pole. The tray accommodates up to two FP-PA20 Audio Power Amplifiers (for stereo operation) and two ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
1RU Rack Adapter for TX Series Products
Radio Design Labs TX-RA5 1RU Rack Adapter for TX Series Products
Radio Design Labs' TX-RA5 chassis is a single rack unit accessory which provides mounting for up to 5 TX Series products.
Usually ships in 7-14 business days.
Need it sooner? Call us!
10.4" Rack Mount for 3 TX Series Products
Radio Design Labs TX-HRA3 Rack Mount 10.4" Rack Mount for 3 TX Series Products
The TX-HRA3 rack mounts 3 TX modules. This adapter fits 10.4" racks.Radio Design Labs TX-HRA3 Rack Mount Specifications: Package Dimensions (LxWxD): 13" X 2.5" X 2.5" Shipping Weight: 0.55 lbs.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Din Rail Adaptor for TX Module
Radio Design Labs DRA-35T Din Rail Adaptor for TX Module
The DRA-35T provides mounting for any RDL® TX or MAX TX module to a DIN rail. The unique design allows mounting TX modules in a rack, cabinet or anywhere else DIN rail mounting of TX modules is desired.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Kit to Mount ST, TX Series Modules on FP Panel
Radio Design Labs MB3-RDL Kit to Mount ST, TX Series Modules on FP Panel
TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Mounting Kit for RU and TX Series
Radio Design Labs MB2-RDL Mounting Kit for RU and TX Series
MB-2 pair mounts a RACK-UP or TX module above or below a surface.
Usually ships in 7-14 business days.
Need it sooner? Call us!

Click to download

Radio Design Labs TX-J2 [RESTOCK ITEM]
Unbalanced Input Transformer - Sums Unbalanced Stereo Inputs to Balanced Mono Out

OUR PART #  TXJ2-RST-01

Product Information:

NOTE: This is a RESTOCK item that has had its box opened or has been repackaged. It may have minor cosmetic flaws and may have been sold to a customer and returned. Please contact your Sales Pro for more information on this and other products.

An unbalanced input transformer with unbalanced stereo inputs to summed balanced mono output, the RDL TX-J2 is the ideal choice for installations that require the passive mixing of 2 unbalanced line-level audio sources to feed a balanced (or unbalanced) audio output. It's a complete unbalanced line-level audio input module with a front panel that features 2 gold-plated phono jacks, intended for mono or stereo consumer level sources. Inputs 1 and 2 are combined and balanced through audio transformers configured to reject induced hum. The line-level output is provided on the front-panel detachable terminal block for connection to 10 kOhms or higher input impedance line-level module or equipment inputs.

NOTE: The TX-J2 is a passive module that does not add gain to the consumer level input. Therefore the balanced output level from the module is not a standard +4 dBu. For installations where a +4 dBu balanced line-level is required, or if the input level is particularly low, RDL's TX-LC2 is recommended. Contact your Sales Pro for more details.

Choose the TX-J2 wherever consumer format audio signals need to be converted to a balanced line without gain. Use it individually or in concert with other RDL products as part of a complete audio/video system.

Typical application diagram (added amplifiers and stereo equipment shown are sold separately):

http://www.rdlnet.com/i/product_images_large/tx-j2_drawing.jpg

RDL TX-J2 Features:

  • Mix 2 unbalanced audio signals to mono balanced
  • Combine stereo into mono with balanced output
  • Unbalanced to balanced conversion without gain
  • Hum cancellation on unbalanced line inputs
  • Frequency response: 30 Hz to 20 kHz (+/- 1 dB)

RDL TX-J2 Specifications:

  • Ambient Operating Temperature: 0° C to 55° C
  • Package Type: Cardboard Box
  • Package Dimensions: 2" x 2" x 4"
  • Shipping Weight: 0.335 lbs
  • Product Dimensional Illustration (inches/cm):

TX-J2

Mounting Kit for STICK-ON, TX, or Rack-Up module
Radio Design Labs MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module
Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.
Mounting Frame for Stick/TX
Radio Design Labs SR-4 Mounting Frame for Stick/TX
Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
Pole Mount Tray for RDL Module
Radio Design Labs PM-1T Pole Mount Tray for RDL Module
The PM-1T is a tray that mounts above a projector using a standard (1.5" I.D.) round projector pole or any smaller round or rectangular pole. The tray accommodates up to two FP-PA20 Audio Power Amplifiers (for stereo operation) and two ...
Usually ships in 7-14 business days.
Need it sooner? Call us!
1RU Rack Adapter for TX Series Products
Radio Design Labs TX-RA5 1RU Rack Adapter for TX Series Products
Radio Design Labs' TX-RA5 chassis is a single rack unit accessory which provides mounting for up to 5 TX Series products.
Usually ships in 7-14 business days.
Need it sooner? Call us!
10.4" Rack Mount for 3 TX Series Products
Radio Design Labs TX-HRA3 Rack Mount 10.4" Rack Mount for 3 TX Series Products
The TX-HRA3 rack mounts 3 TX modules. This adapter fits 10.4" racks.Radio Design Labs TX-HRA3 Rack Mount Specifications: Package Dimensions (LxWxD): 13" X 2.5" X 2.5" Shipping Weight: 0.55 lbs.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Din Rail Adaptor for TX Module
Radio Design Labs DRA-35T Din Rail Adaptor for TX Module
The DRA-35T provides mounting for any RDL® TX or MAX TX module to a DIN rail. The unique design allows mounting TX modules in a rack, cabinet or anywhere else DIN rail mounting of TX modules is desired.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Kit to Mount ST, TX Series Modules on FP Panel
Radio Design Labs MB3-RDL Kit to Mount ST, TX Series Modules on FP Panel
TX or STICK-ON Module fastens to MB-3 which slides into FP-RRA/H track.
Usually ships in 7-14 business days.
Need it sooner? Call us!
Mounting Kit for RU and TX Series
Radio Design Labs MB2-RDL Mounting Kit for RU and TX Series
MB-2 pair mounts a RACK-UP or TX module above or below a surface.
Usually ships in 7-14 business days.
Need it sooner? Call us!

Click to download

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM