Pathway Connectivity DMX Repeater Pro 9118
8 Way - Front RJ45 Ethercon - Fully Isolated

OUR PART #  P9118

Log In for price!

Don't have an account? Apply today!

NOTE: Actual product may vary in appearance and specification. For more information on this and other products, please contact your Sales Pro. 

 The DMX Repeater Pro series from Pathway® Connectivity are intelligent opto-splitters that bring Ethernet-type features to plain DMX networks. This model (Part# 9118) is an 8 way, front RJ45 Ethercon, that is fully isolated. The DMX Repeater Pro's RDM (Remote Device Management) support allows the Repeater Pro to act as an RDM Controller, or as a proxy. 

In venues where a console is moved frequently, Hub Mode allows the Repeater Pro to sense which port is receiving DMX, the automaticallyroute the signal to the remaining ports - eliminating the need for patch bays. The Repeater Pro also allows for easy prioritization between two consoles, or HTP-merge two sources with one source able to roam - ideal for incorporating remote focus units. 

Pathway DMX Repeater Pro 9118 Includes:

  • Installation/Operations manual
  • Rackmount Ears

Pathway DMX Repeater Pro 9118 Features:

  • Silent operation
  • 8 outputs 
  • E1.20 RDM and E1.11 DMX512A compliant
  • Three modes: RDM, Merge, and Hub
  • RDM discovery and end device management from the frontpanel
  • RDM can be disabled on a port-by-port basis toaccommodate older equipment
  • Merge two controllers without any additional gear
  • Automatically switch a console between locations bysimply unplugging and replugging the console
  • Units running in different modes can be chainedtogether
  • Fully configurable from the front display
  • DMX output speed and signal loss behavior areuser-selectable, including hold forever
  • Monitor incoming DMX signal levels in real time
  • DMX Console sends a channel level to all ports, for anindependent DMX signal check on end devices
  • Self-resetting over-voltage protection on all ports
  • Racxk ears included 

Pathway DMX Repeater Pro 9118 Specifications:

  • 85-250VAC 50/60 Hz wide-ranging power input OperatingConditions:  -10 to +50°C, 5-95% relative humidity, non-condensing 
  • 0.75A power consumption
  • 2500V opto-isolation between all ports
  • 250V fault protection per port 
  • Standards Compliance:
    • USITT DMX512 –1990 \ ANSI E1.11 DMX512-A R2013
    • E1.20 RDM R2010—Remote Device Management
    • ETL
    • CE
    • RoHS 2002/95/EC
  • Weights and Dimensions:
    • 5.2 lb (2.4 kg)
    • 17 x 6 x 1.7 in (432 x 150 x 40mm)

 

Pathway Connectivity DMX Repeater Pro 9118
8 Way - Front RJ45 Ethercon - Fully Isolated

OUR PART #  P9118

Product Information:

NOTE: Actual product may vary in appearance and specification. For more information on this and other products, please contact your Sales Pro. 

 The DMX Repeater Pro series from Pathway® Connectivity are intelligent opto-splitters that bring Ethernet-type features to plain DMX networks. This model (Part# 9118) is an 8 way, front RJ45 Ethercon, that is fully isolated. The DMX Repeater Pro's RDM (Remote Device Management) support allows the Repeater Pro to act as an RDM Controller, or as a proxy. 

In venues where a console is moved frequently, Hub Mode allows the Repeater Pro to sense which port is receiving DMX, the automaticallyroute the signal to the remaining ports - eliminating the need for patch bays. The Repeater Pro also allows for easy prioritization between two consoles, or HTP-merge two sources with one source able to roam - ideal for incorporating remote focus units. 

Pathway DMX Repeater Pro 9118 Includes:

  • Installation/Operations manual
  • Rackmount Ears

Pathway DMX Repeater Pro 9118 Features:

  • Silent operation
  • 8 outputs 
  • E1.20 RDM and E1.11 DMX512A compliant
  • Three modes: RDM, Merge, and Hub
  • RDM discovery and end device management from the frontpanel
  • RDM can be disabled on a port-by-port basis toaccommodate older equipment
  • Merge two controllers without any additional gear
  • Automatically switch a console between locations bysimply unplugging and replugging the console
  • Units running in different modes can be chainedtogether
  • Fully configurable from the front display
  • DMX output speed and signal loss behavior areuser-selectable, including hold forever
  • Monitor incoming DMX signal levels in real time
  • DMX Console sends a channel level to all ports, for anindependent DMX signal check on end devices
  • Self-resetting over-voltage protection on all ports
  • Racxk ears included 

Pathway DMX Repeater Pro 9118 Specifications:

  • 85-250VAC 50/60 Hz wide-ranging power input OperatingConditions:  -10 to +50°C, 5-95% relative humidity, non-condensing 
  • 0.75A power consumption
  • 2500V opto-isolation between all ports
  • 250V fault protection per port 
  • Standards Compliance:
    • USITT DMX512 –1990 \ ANSI E1.11 DMX512-A R2013
    • E1.20 RDM R2010—Remote Device Management
    • ETL
    • CE
    • RoHS 2002/95/EC
  • Weights and Dimensions:
    • 5.2 lb (2.4 kg)
    • 17 x 6 x 1.7 in (432 x 150 x 40mm)

 

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at for more information

Serving Contractors, Dealers, and Installers Since 1977

Contact: 1-800-828-0509 / Hours: Mon - Fri 7:00AM - 7:00PM